RE: [lwip-users] DHCP issues....problem found; how do I solve it?

[Tom C. Barker]

This has been set all the time. If I take out the 
memcpy, DHCP never gets a properly formed REQUEST out.

#define MEM_ALIGNMENT           4

Thanks,
Tom



-----Original Message-----
From: Leon Woestenberg [mailto:address@hidden
Sent: Sunday, November 30, 2003 11:44 AM
To: Mailing list for lwIP users; Discussion of development issues
regarding lwIP.
Subject: Re: [lwip-users] DHCP issues....problem found; how do I solve
it?


Hello Tom

----- Original Message ----- 
From: "Tom C. Barker" <address@hidden>
To: "'Mailing list for lwIP users'" <address@hidden>
Sent: Wednesday, November 26, 2003 1:09 AM
Subject: [lwip-users] DHCP issues....problem found; how do I solve it?


> The issue of malformed packets is that on the Coldfire5282,
> the transmit buffer must be 4-byte aligned.
> 
> I confirmed the proper working of DHCP by creating a 4-byte 
> aligned buffer and then doing a memcpy every time (ugh!) in
> low_level_output: this idea fails in many areas but proves that
> DHCP is working just fine.
> 
> How do I align _any_ packet so that after the TCP/UDP and IP 
> headers are tacked on, I end up with a 4-byte aligned buffer?  
> 
> Anybody got an idea (shy of a total rewrite)? Hopefully I have 
> overlooked something....
>

 Have you tried setting this define to 4?

/* ---------- Memory options ---------- */
/* MEM_ALIGNMENT: should be set to the alignment of the CPU for which
   lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2
   byte alignment -> define MEM_ALIGNMENT to 2. */
#define MEM_ALIGNMENT           4

Let us know if this works, thanks,

Leon.


_______________________________________________
lwip-users mailing list
address@hidden
http://mail.gnu.org/mailman/listinfo/lwip-users