On 03/06/2012 11:26 AM, Giuseppe wrote:
Hi all,
i'm trying to install LTIB for configure my kernel for imx53 QSB
board.
I want install ubuntu with driver for SIERRA SL8092 modem HSPA.
I'm newbie. How i can do?
thanks
i have this error when i write./ltib:
I ran the command: sudo -S -l which returned:
Matching Defaults entries for giuseppe on this host:
env_reset
User giuseppe may run the following commands on this host:
(root) NOPASSWD: /usr/bin/rpm, (root)
/opt/freescale/ltib/usr/bin/rpm
(ALL) ALL
This means you don't have sudo permission to execute rpm
commands as root
without a password. This is needed for this build script to
operate correctly.
To configure this, as root using the command "/usr/sbin/visudo",
and add the following line in the User privilege section:
giuseppe ALL = NOPASSWD: /usr/bin/rpm, /opt/ltib/usr/bin/rpm
Giuseppe, you need to modify /etc/sudoers (run "sudo
/usr/sbin/visudo") to allow you to run "/opt/ltib/user/bin/rpm" - it
shows you can run "/opt/freescale/ltib/user/bin/rpm". Make that
change and this error should go away...
--
Peter Barada
address@hidden
|