Re: [Ltib] mpc832x.dtb

[Érico Porto]

ok solved that.. I've made it using the dtc tool!

Now I'm having another problem.. I'm trying to create another ltib setup. I've put all the packages from ltib in /opt/freescale/pkgs

but, when I run ltib, it tries to get the packages from the internet. Is there a way to force it to look only on the pkgs already on this directory?

Érico V. Porto

On Tue, Jan 17, 2012 at 10:59 AM, Érico Porto <address@hidden> wrote:

Hey,

Should the .dtb file in rootfs/boot be generated automatically when using ltib? I had an old version that did that. When I tried ltib today, it didn't got me any file, but when I typed help bootm it said that the third parameter wasn't necessary

But I got

=> run protectoff;bootm 0xfe200000 0xff000000 
Un-Protect Flash Sectors 4-514 in Bank # 1
...........................................................................................e
## Booting image at fe200000 ...
   Image Name:   Linux-2.6.20.6
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    637639 Bytes = 622.7 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at ff000000 ...
   Image Name:   uboot ext2 ramdisk rootfs
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    10051104 Bytes =  9.6 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Ramdisk to 07615000, end 07faae20 ... OK

until here, than the boot process stopped.. or at least I'm getting nothin on my serial.

Regards

Érico V. Porto