Le 8 janvier 2012 à 13:03, Stuart Hughes <address@hidden> a écrit :
> Hi Michel,
>
> Looking at the log file you attached (which is too big to get to the
> list), your initial install run of ltib is building, but not install the
> the rpms, for example, lkc, which provides mconf build the rpm and then
> just goes onto building the next one:
>
> Processing files: lkc-1.4-10
> Finding Provides: (using /opt/ltib/usr/lib/rpm/find-provides)...
> Finding Requires: (using /opt/ltib/usr/lib/rpm/find-requires)...
> PreReq: rpmlib(PayloadFilesHavePrefix) <= 4.0-1
> rpmlib(CompressedFileNames) <= 3.0.4-1
> Requires(rpmlib): rpmlib(PayloadFilesHavePrefix) <= 4.0-1
> rpmlib(CompressedFileNames) <= 3.0.4-1
> Requires: libc.so.6 libdl.so.2 libncurses.so.5 libtinfo.so.5
> linux-gate.so.1 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1)
> libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4)
> libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7)
> Ecrit: /opt/ltib/usr/src/rpm/RPMS/i686/lkc-1.4-10.i686.rpm
> Exécution_de(%clean): /bin/sh -e /home/host/ltib/tmp/rpm-tmp.43073
> + umask 022
> + cd /opt/ltib/usr/src/rpm/BUILD
> + cd lkc-1.4
> + rm -rf /home/host/ltib/tmp/lkc
> + exit 0
> Exécution_de(--clean): /bin/sh -e /home/host/ltib/tmp/rpm-tmp.43073
> + umask 022
> + cd /opt/ltib/usr/src/rpm/BUILD
> + rm -rf lkc-1.4
> + exit 0
> Build time for lkc: 3 seconds
>
>
>
> Processing: patch
> ===================
> Build path taken because: no prebuilt rpm,
> Try patch-2.5.4.tar.gz.md5 from the GPP
>
>
> You should see after the build time, something like this:
> sudo /opt/ltib/usr/bin/rpm --root / --dbpath /opt/ltib/var/lib/rpm -e
> --allmatches --nodeps --noscripts --define '_tmppath
> /data/seh/Src/ltib_bsps/savannah_ltib/tmp' lkc 2>/dev/null
> sudo /opt/ltib/usr/bin/rpm --root / --dbpath /opt/ltib/var/lib/rpm
> --prefix / --ignorearch -ivh --force --nodeps --excludedocs --noscripts
> --define '_tmppath /data/seh/Src/ltib_bsps/savannah_ltib/tmp'
> /opt/ltib/usr/src/rpm/RPMS/i686/lkc-1.4-10.i686.rpm
> Preparing... ###########################################
> [100%]
> 1:lkc ###########################################
> [100%]
>
>
> Can you run this: /opt/ltib/usr/bin/rpm -qa
> that should list the packages that that rpm copy thinks it has
> installed, for example:
>
> /opt/ltib/usr/bin/rpm -q lkc
> lkc-1.4-10
>
> If you do get this output, it means rpm thinks the package is installed.
> In which case, confirm this with:
>
>
> /opt/ltib/usr/bin/rpm -ql lkc
> //opt
> //opt/ltib
> //opt/ltib/usr
> //opt/ltib/usr/bin
> //opt/ltib/usr/bin/conf
> //opt/ltib/usr/bin/mconf
>
> and then check those files are actually present on the filesystem:
> ls -l /opt/ltib/usr/bin/mconf
>
> Regards, Stuart
>
>
>
>
>
>
> On 06/01/12 16:37, address@hidden wrote:
> > Hi Peter,
> >
> >
> > All seems correct in file host_config.log .
> >
> > No Error on rpm construction and install but no files installed into
> > /opt/ltib/usr/bin.
> >
> > Only rpm related files(rpm,rpm2cpio, and links) are there.
> >
> >
> > i joined the host_config.log file
> >
> >
> > Regards,
> >
> >
> > Michel
> >
> >
> >
> >
> >
> > _______________________________________________
> > LTIB home page: http://ltib.org
> >
> > Ltib mailing list
> > address@hidden
> > https://lists.nongnu.org/mailman/listinfo/ltib