Re: [Ltib] CodeSourcery 2010.09-55 toolchain update

[Stuart Hughes]

Hi Gernot,

Thanks for the information.  It's odd there's no click-thru license and 
so one would think this is GPL.

Unless someone can confirm with CodeSourcery that this is okay to 
mirror, I can't upload this to the GPP.

The other alternative it to wait/ask for Freescale to push this out to 
the GPP (they have feed).

Regards, Stuart


On 05/08/11 13:57, Gernot Hillier wrote:
> Dear Stuart!
>
> Sure, that's freescale-powerpc-linux-gnu-2010.09-55.i686.rpm, 
> downloaded from this site:
>
> http://www.codesourcery.com/sgpp/lite/power/portal/release1571
>
> If direct link doesn't work, follow this path:
>
> www.codesourcery.com > Products > Sourcery Codebench > Editions > Lite 
> > Power > Downloads > GNU/Linux.
>
> After installing this RPM, there is 
> /opt/freescale/usr/local/gcc-4.5.55-eglibc-2.11.55/powerpc-linux-gnu/share/doc/freescale-powerpc-linux-gnu/LICENSE.txt 
> which speaks about "CodeSourcery Proprietary Components". And it's not 
> clear to me whether this RPM contains such components or not.
>
> --
> Regards,
>
> Gernot
>
> Am 24.07.2011 18:57, schrieb Stuart Hughes:
> > Hi Gernot,
> >
> > Can you point me to the link for the toolchain and also the place where
> > the license restrict distribution.  AFAIK normally CodeSourcery "lite"
> > toolchains allow redistribution.
> >
> > Regards, Stuart
> >
> > On 15/07/11 13:50, Gernot Hillier wrote:
> > > Dear all!
> > >
> > > The attached patch contains the settings for the current CodeSourcery
> > > toolchain for e300c3 platforms.
> > >
> > > However, please note I didn't test it yet with current LTIB CVS as 
> > > there
> > > seems to be a license issue for using it: the CodeSourcery license
> > > doesn't allow me to distribute the RPM, so I can't upload it to GPP.
> > >
> > > Can you put this to GPP? If yes, I can happily test the patch with
> > > current LTIB and probalby post an update.