Re: [Ltib] Build results for 20110803

[Stuart Hughes]

Hi Douglas,

The autobuilder covers enough target platforms that are close enough to 
what you need.

The problems you're running into are very basic setup problems (e.g. no 
network), so before trying to debug ltib itself, get the basic setup 
working.

You should be able to select any platform your want to build and run 
it.  If you can't download from the GPP, you're dead in the water.

Regards, Stuart

On 03/08/11 19:19, Douglas Peterson wrote:
> I noticed that neither of the two packages that use the
> 'tc-fsl-x86lnx-e300c3-4.1.78-1.i386.rpm' toolchain are built by this
> autobuilder.
>
> Freescale MPC837xE MDS development board (config/platform/mpc837xemds)
>
> Freescale MPC512x based boards (config/platform/mpc5121ads)
>
> Is it possible to get one of these added?
>
> Douglas
>
>
> From: address@hidden
> [mailto:address@hidden On Behalf Of
> autobuilder
> Sent: Wednesday, August 03, 2011 10:51 AM
> To: ltib-users
> Subject: [Ltib] Build results for 20110803
>
> ep93xx
> imx31ads
> mpc5200
> mpc82xx
> mpc8349itx
> mpc8548cds
> phy3250
> qs875s
>
>
> _______________________________________________
> LTIB home page: http://ltib.org
>
> Ltib mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/ltib