Re: [Ltib] Problems building LTIB...

[hugo Alexandre]

Hi Stuart,

The Authen/NTLM module (libauthen-ntlm-perl) isn't able to install on my synaptic package list. Are there another package that I could use?

Thank,

Hugo A. Gabardo

2011/7/2 Stuart Hughes <address@hidden>

Hi Hugo,

You need to install the missing Authen/NTLM perl modules for your
machine using the package manager (synaptic/yum for example depending on
distro).

Regards, Stuart

On 01/07/11 20:13, hugo Alexandre wrote:
> Hi Stuart,
>
> Yes, I use a proxy to access the Internet.
> I've done what you wrote (changing .ltibrc file ), and I got the
> folowing message:
>
> Processing platform: host support
> ===================================
>
> Processing: rpm-fs
> ====================
> Build path taken because: no prebuilt rpm,
> Testing network connectivity for gpp
> No network download connection available
> Can't get: rpm-4.0.4.tar.gz at ./ltib line 821.
> Can't locate Authen/NTLM.pm in @INC (@INC contains:
> /home/user/Desktop/ltib/bin /etc/perl /usr/local/lib/perl/5.10.1
> /usr/local/share/perl/5.10.1 /usr/lib/perl5 /usr/share/perl5
> /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at
> /usr/share/perl5/LWP/Authen/Ntlm.pm line 8.
> BEGIN failed--compilation aborted at /usr/share/perl5/LWP/Authen/Ntlm.pm
> line 8.
> Compilation failed in require at (eval 26) line 3.
>     ...propagated at ./ltib line 2498.
> tracebackincd
>
>  main::check_rpm_setup:2498
>   main::host_checks:1483
>    main:548
>
>
> Started: Fri Jul  1 14:41:45 2011
> Ended:   Fri Jul  1 14:41:55 2011
> Elapsed: 10 seconds
>
> Use of uninitialized value in concatenation (.) or string at ./ltib line
> 2818.
> Use of uninitialized value in concatenation (.) or string at ./ltib line
> 2818.
> VERSION          : 10.1.1
> CVS_VERSION      : $Revision: 1.75 $ (Savannah)
> PLATFORM         : host
> GNUTARCH         : i686
> TOOLCHAIN        :
> TOOLCHAIN_CFLAGS :
>
> These packages failed to build:
> rpm-fs
>
> Build Failed
>
>
> I don't know if this info will help, but I was having the same ploblem
> with apt-get, then I added the following lines on file/etc/enviroment/
> and now it works fine:
>
>  http_proxy="http://user:address@hidden:3128"
>   ftp_proxy="http://user:address@hidden:3128"
>
>   Acquire {
>   HTTP::Proxy user:address@hidden:3128;
>   FTP::Proxy user:address@hidden:3128;
>   };
>   alias wget="wget --proxy-user=<user> --proxy-passwd=<password>"
>
> Thanks,
>
> Hugo A. Gabardo
>
>

> 2011/6/29 Stuart Hughes <address@hidden <mailto:address@hidden>>

>
>     __
>     Hi Hugo,
>
>     It look like you don't have direct network connectivity to the Internet.
>
>     Are you at work? if so do you know if you normally use a proxy to
>     access the Internet?  If so you'll need to set-up proxying for LTIB
>     by editing the .ltibrc file.  The sections you need to change would be:
>
>     # The HTTP proxy for internet access
>     # example: http://USER:address@hidden:PORT

>     <mailto:http://USER:address@hidden:PORT>

>     %http_proxy
>     http://USER:address@hidden:PORT

>     <mailto:http://USER:address@hidden:PORT>

>
>     # For each of the sources: ppp, gpp, gpp_stage, cpp_stage
>     # there is a corresponding entry that says whether or not
>     # to use a proxy.
>     # Valid values are: 1 : 0
>
>     %gpp_proxy
>     1
>
>     Obviously the  %http_proxy entry needs to reflect your environment.
>
>     The quick way to find out your proxy settings is to see if you can
>     access http://bitshrine.org/ from your browser.  If so look at the
>     proxy settings it is using and crib those.
>
>     Regards, Stuart
>
>
>
>     On 29/06/11 13:45, hugo Alexandre wrote:
>>     Hi All,
>>
>>     I'm trying to build LTIB for the first time on Ubuntu 10.04, and I
>>     always get the same error.
>>
>>     The content of host_config.log is:
>>
>>     Processing platform: host support
>>     ===================================
>>
>>     Processing: rpm-fs
>>     ====================
>>     Build path taken because: no prebuilt rpm,
>>     Testing network connectivity for gpp
>>     No network download connection available
>>     Can't get: rpm-4.0.4.tar.gz at ./ltib line 821.

>>     Can't connect to bitshrine.org:80 <http://bitshrine.org:80>

>>     (connect: Connection timed out)    ...propagated at ./ltib line 2498.
>>     traceback:
>>      main::check_rpm_setup:2498
>>       main::host_checks:1483
>>        main:548
>>
>>
>>     Started: Wed Jun 29 08:24:29 2011
>>     Ended:   Wed Jun 29 08:25:00 2011
>>     Elapsed: 31 seconds
>>
>>     Use of uninitialized value in concatenation (.) or string at
>>     ./ltib line 2818.
>>     Use of uninitialized value in concatenation (.) or string at
>>     ./ltib line 2818.
>>     VERSION          : 10.1.1
>>     CVS_VERSION      : $Revision: 1.75 $ (Savannah)
>>     PLATFORM         : host
>>     GNUTARCH         : i686
>>     TOOLCHAIN        :
>>     TOOLCHAIN_CFLAGS :
>>
>>     These packages failed to build:
>>     rpm-fs
>>
>>     Build Failed
>>
>>     I've already searched for a solution on google, but I couldn't
>>     find anything.
>>
>>
>>     Thanks in advance,
>>
>>     Hugo A. Gabardo
>>
>>
>>     _______________________________________________
>>     LTIB home page: http://ltib.org
>>
>>     Ltib mailing list

>>     address@hidden <mailto:address@hidden>

>>     https://lists.nongnu.org/mailman/listinfo/ltib
>
>