Re: [Ltib] u-boot on i.mx53 ARD

[Stuart Hughes]

Hi Haku,

How are you changing the setting to i.MX53LOCO or i.MX53EVK, is this a 
configuration option in that BSP (using ./ltib -m config) ?

This is BSP is not part of this open-source project and so I have no 
visibility of what's in it.  However the things you can look for is what 
CONFIG_xxxx option is pass in when u-boot is built for the different 
options you have chosen.

The other thing to make sure (ask Freescale) is whether the u-boot you 
can build with LTIB has been tested on the various platforms you're 
targeting.

Regards, Stuart


On 16/06/11 23:47, Haku Sato wrote:
> Hi,
>
> I've been struggling with u-boot image generated by LTIB for i.MX53-ARD board.  
> I cannot get the SD card to load and start U-BOOT.
>
> When I change the setting to i.MX53LOCO or i.MX53EVK and use the quick start or 
> EVK, u-boot seem to work properly.  None of the other options are changed 
> except for the platform on LTIB, and I am wondering if LTIB could have 
> something to do with it.
>
> Have any of you experienced issues like this?
>
> Thanks
>
> Haku
>
> _______________________________________________
> LTIB home page: http://ltib.org
>
> Ltib mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/ltib