[Ltib] mm-codec package install question

[Sato Haku-B36453]

HI,

 

I was setting up fsl-mm-codeclib and Gstreamer.  At the end of ltib compile sequence, I encountered a problem. 

 

I sent

~$./ltib –c

 

And set up packages and selected the appropriate selections according to the Multi Media Framework reference manual. 

 

At the end of compile, I go the following message.

++begin excerpt

Processing: fsl-mm-codeclib

=====================

Processing: fls-mm-ms-codeclib

=====================

Build path taken because: no built rpm,

Testing network connectivity

OK PPP:

 

Try fsl-mm-ms-codeclib-1.9.6.tar.gz.md5 from the PPP

http://auslxsc01.mtwk.freescale.net/ppp/fsl-mm-ms-codeclib-1.9.6.tar.gz.md5:

ERROR 404:  Not Found.

Try fsl-mm-ms-codeclib-1.9.6.tar.gz from the PPP

ERROR404:  notfound

Can’t get: fsl-mm-ms-codeclib-1.9.6.tar.gz at ./ltib line 790

 

f_buildrpms() returned an error, exiting

traceback:

main:560

 

++end of error excerpt

 

It seems that LTIB could not find the file at /PPP site.  So I went there and found a version 2.0.0

 

Here are my questions…

1.        Could I use 2.0.0 in place of 1.9.6? 

2.       If so, how would I get ltib to recognize it? 

3.       Is there alternalte way to get this installed? 

 

I am trying to get this resolved but had not had any success, your help is appreciated. 

 

Thanks