Re: [Ltib] Alsaconfig ptoblem with Ubuntu

[Stuart Hughes]

Hi Kevin,

Thanks for the clarification.

Regards, Stuart

Kevin Wells wrote:
> Hi Claudio,
>
> ALSA works fine for playback, record, and mixing. So use it regardless of
> what the documentation says! :) Be sure to create your alsa device nodes
> in /dev/snd if using static device nodes.
>
> Hi Stuart,
>
> > > BTW: this BSP platform builds the kernel every time and asks for
> > > configuration, I'm not sure if this is desirable?  If the maintainer for
> > > that platform is reading, please consider changing this.
> This is an undesirable side effect from too much development work. I'll
> remove this - thanks!
>
> Kevin
> tft
>
> > Subject: Re: [Ltib] Alsaconfig ptoblem with Ubuntu
> >
> > Thanks stuart.
> >
> > I will check this, but is that the manual at NXP was saying not to use
> > ALSA
> > anyway, thank you for help.
> >
> > Regards
> > Claudio Borges.
> >
> > Stuart Hughes wrote:
> > > Hi Claudio,
> > >
> > > I've checked in a change to alsa-utils.spec that fixes this by adding
> > > --disable-nls to configure.
> > >
> > > BTW: this BSP platform builds the kernel every time and asks for
> > > configuration, I'm not sure if this is desirable?  If the maintainer for
> > > that platform is reading, please consider changing this.
> > >
> > > Regards, Stuart
> > >
> > > Claudio wrote:
> > >
> > > > Hi Stuart i building for PHYCOM LPC3250 (NXP).
> > > >
> > > > I remove ALSA from LTIB configure and worked well
> > > >
> > > > Thanks for help.
> > > > Regards, Claudio
> > > >
> > > >
> > > > Stuart Hughes wrote:
> > > >
> > > > > Hi Claudio,
> > > > >
> > > > > I forgot to ask, what platform are you building for?
> > > > >
> > > > > I just tried a build on imx27 and it was okay (DreamLinux-3.5 (Debian
> > > > > Lenny) single core machine).  It looks to me like a it may be a
> > > > > parallel make issue (needing -j1 in the make line).
> > > > >
> > > > > Regards, Stuart
> > > > >
> > > > > Claudio wrote:
> > > > >
> > > > >
> > > > > > Hi Stuart,
> > > > > >
> > > > > > Believe I'm using the latest version of LTIB, because I got the
> > > > > > version from CVS yesterday (19/02).
> > > > > >
> > > > > > Regards.
> > > > > >
> > > > > > Stuart Hughes wrote:
> > > > > >
> > > > > >
> > > > > > > Hi Claudio,
> > > > > > >
> > > > > > > Which version of LTIB are you running? (where's it from).
> > > > > > >
> > > > > > > Regards, Stuart
> > > > > > >
> > > > > > > Claudio wrote:
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > > I´m running Ubuntu 9.10 and in the mornig i start to install ltib,
> > > > > > > > but now apper a error:
> > > > > > > >
> > > > > > > > make[1]: Leaving directory
> > > > > > > > `/home/claudio/ltib/rpm/BUILD/alsa-utils-1.0.11rc2/include'
> > > > > > > > Making all in alsactl
> > > > > > > > make[1]: Entering directory
> > > > > > > > `/home/claudio/ltib/rpm/BUILD/alsa-utils-1.0.11rc2/alsactl'
> > > > > > > > make[1]: Nothing to be done for `all'.
> > > > > > > > make[1]: Leaving directory
> > > > > > > > `/home/claudio/ltib/rpm/BUILD/alsa-utils-1.0.11rc2/alsactl'
> > > > > > > > Making all in alsaconf
> > > > > > > > make[1]: Entering directory
> > > > > > > > `/home/claudio/ltib/rpm/BUILD/alsa-utils-1.0.11rc2/alsaconf'
> > > > > > > > Making all in po
> > > > > > > > make[2]: Entering directory
> > > > > > > > `/home/claudio/ltib/rpm/BUILD/alsa-utils-1.0.11rc2/alsaconf/po'
> > > > > > > > mv: cannot stat `t-ru.gmo': No such file or directory
> > > > > > > > make[2]: *** [ru.gmo] Error 1
> > > > > > > > make[2]: *** Waiting for unfinished jobs....
> > > > > > > > mv: cannot stat `t-ja.gmo': No such file or directory
> > > > > > > > make[2]: *** [ja.gmo] Error 1
> > > > > > > > make[2]: Leaving directory
> > > > > > > > `/home/claudio/ltib/rpm/BUILD/alsa-utils-1.0.11rc2/alsaconf/po'
> > > > > > > > make[1]: *** [all-recursive] Error 1
> > > > > > > > make[1]: Leaving directory
> > > > > > > > `/home/claudio/ltib/rpm/BUILD/alsa-utils-1.0.11rc2/alsaconf'
> > > > > > > > make: *** [all-recursive] Error 1
> > > > > > > > error: Bad exit status from /home/claudio/ltib/tmp/rpm-tmp.67401
> > > > > > > > (%build)
> > > > > > > >
> > > > > > > >
> > > > > > > > RPM build errors:
> > > > > > > >    Bad exit status from /home/claudio/ltib/tmp/rpm-tmp.67401
> > (%build)
> > > > > > > > Build time for alsa-utils: 12 seconds
> > > > > > > >
> > > > > > > > Failed building alsa-utils
> > > > > > > >
> > > > > > > >
> > > > > > > > f_buildrpms() returned an error, exiting
> > > > > > > > traceback:
> > > > > > > > main:561
> > > > > > > >
> > > > > > > >
> > > > > > > > Started: Tue Jan 19 17:09:56 2010
> > > > > > > > Ended:   Tue Jan 19 17:13:38 2010
> > > > > > > > Elapsed: 222 seconds
> > > > > > > >
> > > > > > > > These packages failed to build:
> > > > > > > > alsa-utils
> > > > > > > >
> > > > > > > > Build Failed
> > > > > > > >
> > > > > > > >
> > > > > > > > Someone can help me?
> > > > > > > > (I Have gettext instaled)
> > > > > > > >
> > > > > > > > Best Regards.
> > > > > > > >
> > > > > > > >
> > > > > > > > _______________________________________________
> > > > > > > > LTIB home page: http://ltib.org
> > > > > > > >
> > > > > > > > Ltib mailing list
> > > > > > > > address@hidden
> > > > > > > > http://lists.nongnu.org/mailman/listinfo/ltib
> > > > > > > .
> > > > > .
> > > .
> >
> >
> >
> > _______________________________________________
> > LTIB home page: http://ltib.org
> >
> > Ltib mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/ltib