Re: [Ltib] Problem while bringing up X on LTIB+ IMX27 ADS board.

[Stuart Hughes]

Hi Rajesh,

Your spec file looks okay to me.
The build log is attached (gzipped plain text file).
I don't have an imx27 so can't help with testing.

Regards, Stuart

Rajesh Marathe wrote:
> Hi Hamilton/Stuart,
>
> Thanks for all your suggestions thus far. I did follow your suggestions
> and tried but still in vain. I did some debugging and I suspect that my
> 'X' configuration might not be correct as on running 'Xfbdev' it
> searches for a keyboard. Can somebody please send me the configuration
> details for while running "./configure" under xorg-server-1.4.2'
> directory to work on imx27ADS keyboard. My xorg-server-1.4.2.spec file
> configure details are as under:
> ----------------------------------------------------------------------
> if rpm --dbpath %{_dbpath} -q tslib &>/dev/null
> then
>     extra_opts='--enable-tslib --disable-ipv6 --enable-xkb --disable-dga
> --enable-kbd_mode'
> else
>     extra_opts='--enable-xkb --disable-ipv6 --enable-kbd_mode'
> fi
>
> # By default we'll use the original options that build kdrive 
> # and override the ones we need for a full Xorg
> if [ -n "$PKG_XORG_SERVER_WANT_XORG" ]
> then
>     extra_opts="$extra_opts --enable-xorg --enable-dga"
> fi
>
> ./configure --prefix=%{_prefix} --host=$CFGHOST --build=%{_build} \
>             --enable-composite  --enable-kdrive --disable-dri
> --disable-xinerama --disable-xf86misc --disable-xf86vidmode
> --disable-xorg --disable-xorgcfg --disable-xnest --disable-xvfb
> --disable-xevie --disable-xprint --disable-xtrap --enable-xfbdev
> --disable-dmx --enable-builtin-fonts --disable-dbus $extra_opts
>
> ----------------------------------------------------------------------
> Let me know if these are correct.
>
> I still think my X configuration is an issue and hence the problem.
>
> regards,
> Rajesh Marathe.
>
> On Mon, 2009-12-28 at 17:24 -0200, Hamilton Vera wrote:
> > Here is what we use to startx :
> >
> > #!/bin/sh
> >
> > module=`lsmod | grep mxc_ts`
> > if [ ! "$module" ]; then
> >         modprobe mxc_ts;
> > fi
> >
> > module=`lsmod | grep ehci_hcd`
> > if [ ! "$module" ]; then
> >         modprobe ehci_hcd;
> > fi
> >
> > export TSLIB_CONSOLEDEVICE=none
> > export TSLIB_TSDEVICE=/dev/input/event1
> >
> > echo "nameserver 208.67.220.220" > /etc/resolv.conf
> >
> > if [ ! -e /dev/tty0 ]; then ln -s /dev/vc/0 /dev/tty0; fi
> > if [ ! -e /dev/tty1 ]; then ln -s /dev/vc/1 /dev/tty1; fi
> > if [ ! -e /dev/tty2 ]; then ln -s /dev/vc/2 /dev/tty2; fi
> >
> > Xfbdev -screen 240x320x60  -mouse tslib,,device=/dev/input/event1 &
> > sleep 3
> >
> > # Start woosh internet browser.
> > #DISPLAY=:0 /usr/bin/woosh
> >
> > # Start dillo internet browser.
> > DISPLAY=:0 /usr/bin/dillo
> > # Stops the X.
> > #killall Xfbdev
> >
> >
> > []'s
> >
> > Hamilton Vera
> >
> >
> >
> > On Mon, Dec 28, 2009 at 11:31 AM, Stuart Hughes <address@hidden> wrote:
> > > Hi Rajesh,
> > >
> > > If you have the latest Savannah CVS startx should be in the path (on the
> > > host): rootfs/usr/bin/startx, this contains:
> > >
> > > #!/bin/sh
> > >
> > > Xfbdev -ac -mouse mouse -keybd keyboard &
> > > sleep 3
> > > DISPLAY=:0 twm
> > > killall Xfbdev
> > >
> > > Regards, Stuart
> > >
> > > Rajesh Marathe wrote:
> > > > Stuart,
> > > >
> > > > Thanks. I think I did not start X server earlier. I had compiled LTIB
> > > > with X Server option but did not find "startx" under rootfs on the
> > > > device. How to get the X started on the device ?
> > > >
> > > > regards,
> > > > Rajesh Marathe.
> > > >
> > > > On Mon, 2009-12-28 at 10:54 +0000, Stuart Hughes wrote:
> > > > > Hi Rajesh,
> > > > >
> > > > > I don't have that board so can't look.  However, make sure you have
> > > > > started the X server (with startx) first.  Also make sure you have the
> > > > > framebuffer enabled in the kernel (it should be I think).
> > > > >
> > > > > Regards, Stuart
> > > > >
> > > > > Rajesh Marathe wrote:
> > > > > > Hi,
> > > > > >
> > > > > > We are working on IMX27 ADS board and have taken latest CVS based LTIB
> > > > > > code. I have included 'Dillo2' and 'fltk' packages as my objective would
> > > > > > be to run the browser dillo on the imx27 system.
> > > > > >
> > > > > > After the Linux boots up, I go to the console and try to run the
> > > > > > browser. But, I get the following error:
> > > > > >
> > > > > > ----------------------------------------------------------------------
> > > > > > mx27#
> > > > > >         mx27#
> > > > > >             mx27# ./dillo
> > > > > >                 paths: Cannot open file
> > > > > > '//.dillo/dillorc'                                      paths:
> > > > > > Using /usr/etc/dillo/dillorc
> > > > > > paths: Cannot open file
> > > > > > '//.dillo/keysrc'                                       paths:
> > > > > > Using /usr/etc/dillo/keysrc
> > > > > >  dillo_dns_init: Here we go!
> > > > > > (threaded)                                          Disabling
> > > > > > cookies.
> > > > > >  Can't open display
> > > > > > ":0.0"                                                       mx27#
> > > > > > ----------------------------------------------------------------------
> > > > > >
> > > > > > I did try to debug and found out that the function fltk::open_display
> > > > > > returns the above display error.
> > > > > >
> > > > > > How do I set the display correctly so that the browser's opening page
> > > > > > gets displayed on the LCD panel connected to IMX27 board ?
> > > > > >
> > > > > > regards,
> > > > > > Rajesh Marathe.
> > > > > >
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > LTIB home page: http://ltib.org
> > > > > >
> > > > > > Ltib mailing list
> > > > > > address@hidden
> > > > > > http://lists.nongnu.org/mailman/listinfo/ltib
> > >
> > > _______________________________________________
> > > LTIB home page: http://ltib.org
> > >
> > > Ltib mailing list
> > > address@hidden
> > > http://lists.nongnu.org/mailman/listinfo/ltib

xorg-server-build-log.gz
Description: GNU Zip compressed data