Re: [Ltib] Problem while running Dillo2 browser on latest CVS LTIB code + IMX27 ADS board.

[Rajesh Marathe]

Hi Hamilton,

Thanks for your help.

After running the below script, I get the following error messages on
the console:
-----------------------------------------------------------------------
hub 2-0:1.0: USB hub
found                                                      
hub 2-0:1.0: 1 port
detected                                                    
_XSERVTransSocketOpenCOTSServer: Unable to open socket for
inet6                
_XSERVTransOpen: transport open failed for
inet6/freescale:0                    
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for
inet6        
Warning: mode not found, using
default                                          
(EE) XKB: Couldn't open rules
file /usr/share/X11/xkb/rules/base                
Couldn't find keyboard driver
keybd                                             
                                                                                
Backtrace (1
deep):                                                             
0: /lib/ld-linux.so.3
[0x40012e80]                                              
                                                                                
Fatal server
error:                                                             
Segmentation fault
caught                                                       
                                                                                
./run.sh: line 19:  1737 Segmentation fault      Xfbdev -screen
240x320x60 -mous
e
tslib,,device=/dev/input/event1                                               
-----------------------------------------------------------------------

Can you please let me know what am I missing above.

regards,
Rajesh Marathe.

On Mon, 2009-12-28 at 17:24 -0200, Hamilton Vera wrote:
> Here is what we use to startx :
> 
> #!/bin/sh
> 
> module=`lsmod | grep mxc_ts`
> if [ ! "$module" ]; then
>         modprobe mxc_ts;
> fi
> 
> module=`lsmod | grep ehci_hcd`
> if [ ! "$module" ]; then
>         modprobe ehci_hcd;
> fi
> 
> export TSLIB_CONSOLEDEVICE=none
> export TSLIB_TSDEVICE=/dev/input/event1
> 
> echo "nameserver 208.67.220.220" > /etc/resolv.conf
> 
> if [ ! -e /dev/tty0 ]; then ln -s /dev/vc/0 /dev/tty0; fi
> if [ ! -e /dev/tty1 ]; then ln -s /dev/vc/1 /dev/tty1; fi
> if [ ! -e /dev/tty2 ]; then ln -s /dev/vc/2 /dev/tty2; fi
> 
> Xfbdev -screen 240x320x60  -mouse tslib,,device=/dev/input/event1 &
> sleep 3
> 
> # Start woosh internet browser.
> #DISPLAY=:0 /usr/bin/woosh
> 
> # Start dillo internet browser.
> DISPLAY=:0 /usr/bin/dillo
> # Stops the X.
> #killall Xfbdev
> 
> 
> []'s
> 
> Hamilton Vera
> 
> 
> 
> On Mon, Dec 28, 2009 at 11:31 AM, Stuart Hughes <address@hidden> wrote:
> > Hi Rajesh,
> >
> > If you have the latest Savannah CVS startx should be in the path (on the
> > host): rootfs/usr/bin/startx, this contains:
> >
> > #!/bin/sh
> >
> > Xfbdev -ac -mouse mouse -keybd keyboard &
> > sleep 3
> > DISPLAY=:0 twm
> > killall Xfbdev
> >
> > Regards, Stuart
> >
> > Rajesh Marathe wrote:
> >>
> >> Stuart,
> >>
> >> Thanks. I think I did not start X server earlier. I had compiled LTIB
> >> with X Server option but did not find "startx" under rootfs on the
> >> device. How to get the X started on the device ?
> >>
> >> regards,
> >> Rajesh Marathe.
> >>
> >> On Mon, 2009-12-28 at 10:54 +0000, Stuart Hughes wrote:
> >>>
> >>> Hi Rajesh,
> >>>
> >>> I don't have that board so can't look.  However, make sure you have
> >>> started the X server (with startx) first.  Also make sure you have the
> >>> framebuffer enabled in the kernel (it should be I think).
> >>>
> >>> Regards, Stuart
> >>>
> >>> Rajesh Marathe wrote:
> >>>>
> >>>> Hi,
> >>>>
> >>>> We are working on IMX27 ADS board and have taken latest CVS based LTIB
> >>>> code. I have included 'Dillo2' and 'fltk' packages as my objective would
> >>>> be to run the browser dillo on the imx27 system.
> >>>>
> >>>> After the Linux boots up, I go to the console and try to run the
> >>>> browser. But, I get the following error:
> >>>>
> >>>> ----------------------------------------------------------------------
> >>>> mx27#
> >>>>         mx27#
> >>>>             mx27# ./dillo
> >>>>                 paths: Cannot open file
> >>>> '//.dillo/dillorc'                                      paths:
> >>>> Using /usr/etc/dillo/dillorc
> >>>> paths: Cannot open file
> >>>> '//.dillo/keysrc'                                       paths:
> >>>> Using /usr/etc/dillo/keysrc
> >>>>  dillo_dns_init: Here we go!
> >>>> (threaded)                                          Disabling
> >>>> cookies.
> >>>>  Can't open display
> >>>> ":0.0"                                                       mx27#
> >>>> ----------------------------------------------------------------------
> >>>>
> >>>> I did try to debug and found out that the function fltk::open_display
> >>>> returns the above display error.
> >>>>
> >>>> How do I set the display correctly so that the browser's opening page
> >>>> gets displayed on the LCD panel connected to IMX27 board ?
> >>>>
> >>>> regards,
> >>>> Rajesh Marathe.
> >>>>
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> LTIB home page: http://ltib.org
> >>>>
> >>>> Ltib mailing list
> >>>> address@hidden
> >>>> http://lists.nongnu.org/mailman/listinfo/ltib
> >>>>
> >>
> >>
> >
> >
> > _______________________________________________
> > LTIB home page: http://ltib.org
> >
> > Ltib mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/ltib
> >
> 
> 
>