Re: [Ltib] LTIB is showing error

On Wed, Dec 23, 2009 at 7:15 PM, Stuart Hughes <address@hidden> wrote:

Those files should have been copied from the iso image you downloaded to /opt/freescale/pkgs. When you were "experimenting" before maybe you removed them. Re-mount the CD and copy the stuff in pkgs to /opt/freescale/pkgs.

Niamathullah sharief wrote:

Now i got a problem by my mistake.
.ltib works fine for me. But i forget to save the configuration while it runs. so when i try it again by typing ./ltib i am getting some error.

This is the error

address@hidden:~/Desktop/plugins/L2.6.28_4.5.1_SDK_Aug2009_source/ltib$
./ltib **
*

*
*

*Processing platform: Freescale iMX51 Based Boards**
*

*===================================================**
*

*using config/platform/imx/.config**
*

*
*

*Processing: fake-provides**
*

*===========================**
*

*
*

*Processing: u-boot**
*

*====================**
*

*Build path taken because: no prebuilt rpm, **
*

*Testing network connectivity**
*

*OK GPP: **
*

*
*

*Try u-boot-v2009.01-imx_4.5.1.tar.bz2.md5 from the GPP**
*

*http://bitshrine.org/gpp/u-boot-v2009.01-imx_4.5.1.tar.bz2.md5:**
*

*18:46:51 ERROR 404: Not Found.**
*

*Try u-boot-v2009.01-imx_4.5.1.tar.bz2 from the GPP**
*

*http://bitshrine.org/gpp/u-boot-v2009.01-imx_4.5.1.tar.bz2:**
*

*18:46:52 ERROR 404: Not Found.**
*

*Can't get: u-boot-v2009.01-imx_4.5.1.tar.bz2 at ./ltib line 790.**
*

*
*

*
*

*f_buildrpms() returned an error, exiting**
*

*traceback:**
*

* main:560**
*

*
*

*
*

*Started: Wed Dec 23 18:46:50 2009**
*

*Ended: Wed Dec 23 18:46:52 2009**
*

*Elapsed: 2 seconds**
*

*
*

*These packages failed to build:**
*

*u-boot **
*

*
*

*Build Failed**
*

*
*

*Exiting on error or interrupt**
*

address@hidden:~/Desktop/plugins/L2.6.28_4.5.1_SDK_Aug2009_source/ltib$*

I am very very confused

On Wed, Dec 23, 2009 at 5:56 PM, Niamathullah sharief <address@hidden <mailto:address@hidden>> wrote:

tHE PROBLEM SOLVER AFTER I CLOSE AND OPEN THE NEW TERMICAL. Its
working fine now

On Wed, Dec 23, 2009 at 5:40 PM, Stuart Hughes <address@hidden
<mailto:address@hidden>> wrote:

That error message is coming from your host distro, I don't have
that. You'll need to get help on an Ubuntu forum unless someone
else here has seen that message before (I have not). My guess
is you have another window with visudo open, or there is some
other process running visudo.

Niamathullah sharief wrote:

yes i understood that and when try to open that file by
using "sudo visudo"

address@hidden:/usr/local/etc# sudo visudo**
*

*visudo: /etc/sudoers busy, try again later**
*

address@hidden:/usr/local/etc#*

I didnt have any *.tmp file. Now i am searching how to open
that sudoers file to add that line. can you help me

I am getting the foloowing error
visudo: busy try again later

On Wed, Dec 23, 2009 at 5:16 PM, Stuart Hughes <address@hidden
<mailto:address@hidden> <mailto:address@hidden
<mailto:address@hidden>>> wrote:

The error message is telling you what to do. Please read
the error
messages and the FAQ.

Niamathullah sharief wrote:

I am using UBUNTU. I am not using debian. Even though
i used
this command. but this time i am getting different
error. see this
address@hidden:~/Desktop/plugins/L2.6.28_4.5.1_SDK_Aug2009_source/ltib$
./ltib **
*

*
*

*I ran the command: sudo -S -l which returned:**
*

*
*

*[sudo] password for ariem: **
*

*
*

*This means you don't have sudo permission to
execute rpm
commands
as root**
*

*without a password. This is needed for this build
script to
operate
correctly.**
*

*
*

*To configure this, as root using the command
"/usr/sbin/visudo",**
*

*and add the following line in the User privilege
section:**
*

*
*

*ariem ALL = NOPASSWD: /usr/bin/rpm,
/opt/freescale/ltib/usr/bin/rpm**
*

*
*

*traceback:**
*

* main::check_sudo_setup:2444**
*

* main::host_checks:1401**
*

* main:542**
*

*
*

*
*

*Started: Wed Dec 23 16:02:24 2009**
*

*Ended: Wed Dec 23 16:02:26 2009**
*

*Elapsed: 2 seconds**
*

*
*

*
*

*Build Failed**
*

*
*

*Exiting on error or interrupt**
*

address@hidden:~/Desktop/plugins/L2.6.28_4.5.1_SDK_Aug2009_source/ltib$*

On Wed, Dec 23, 2009 at 3:54 PM, Stuart Hughes
<address@hidden <mailto:address@hidden>
<mailto:address@hidden <mailto:address@hidden>>
<mailto:address@hidden <mailto:address@hidden>

<mailto:address@hidden <mailto:address@hidden>>>> wrote:

There's no issue with zlib, if you look the
complaint is now
about:
rpm, rpm-build, m4 and bison. If you install the
missing packages
you should be okay. The exact names depend on
your distro,
it looks
like you're debian based so you need to: sudo
apt-get install
rpm m4
bison

Niamathullah sharief wrote:

This is my output of ./ltib

address@hidden:~/Desktop/plugins/L2.6.28_4.5.1_SDK_Aug2009_source/ltib$
./ltib **
*

*
*

*ltib cannot be run because one or more of
the host
packages
needed to run it**
*

*are either missing or out of date or not
in ltib's
standard
path.
Please**
*

*install/upgrade these packages on your
host. If you have
your own
utilities**
*

*in non-standard paths, please add an entry
into the
.ltibrc file
for example:**
*

*
*

*%path_std**
*

*/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/my/own/exes**
*

*
*

*Package Minimum ver Installed info**
*

*------- ----------- ---------------**
*

*rpm 0 not installed**
*

*rpm-build 0 not installed**
*

*m4 0 not installed**
*

*bison 0 not installed**
*

*
*

*Died at ./ltib line 1397.**
*

*traceback:**
*

* main::host_checks:1397**
*

* main:542**
*

*
*

*
*

*Started: Wed Dec 23 15:42:57 2009**
*

*Ended: Wed Dec 23 15:42:59 2009**
*

*Elapsed: 2 seconds**
*

*
*

*
*

*Build Failed**
*

*
*

*Exiting on error or interrupt**
*

address@hidden:~/Desktop/plugins/L2.6.28_4.5.1_SDK_Aug2009_source/ltib$
**
*

*
*

From:	Niamathullah sharief
Subject:	Re: [Ltib] LTIB is showing error
Date:	Wed, 23 Dec 2009 19:24:02 +0530