Re: [Ltib] Qtopia 2

[Stuart Hughes]

Hi Paolo,

It depends on platform, but that looks reasonable.  For the imx27 I 
have:  rpm/RPMS/arm/qtopia-2.2.0-1.arm.rpm

An extract of the output for the rpm query is:
$ rpm --root `pwd`/rootfs -ql qtopia

//etc
//etc/firstuse
//etc/rc.d
//etc/rc.d/init.d
//etc/rc.d/init.d/qtopia
//opt
//opt/Qtopia
//opt/Qtopia/apps
//opt/Qtopia/apps/Applications
//opt/Qtopia/apps/Applications/.directory
//opt/Qtopia/apps/Applications/addressbook.desktop
//opt/Qtopia/apps/Applications/calculator.desktop
.....
//opt/Qtopia/bin
//opt/Qtopia/bin/addressbook
//opt/Qtopia/bin/appearance
//opt/Qtopia/bin/appservices
//opt/Qtopia/bin/buttoneditor
//opt/Qtopia/bin/calculator
//opt/Qtopia/bin/camera
//opt/Qtopia/bin/clock
//opt/Qtopia/bin/datebook
//opt/Qtopia/bin/embeddedkonsole
....

I suspect you have build errors.  The qtopia build is nasty and so can 
fail undetected.

NOTE: I don't have either your platform or the imx27 so cannot test the 
actual rpm.

Regards, Stuart

Paolo Cremonese wrote:
> Hi Stuart,
> I'm sorry, but it does not change.
> the rpm is
>
> 'pwd'/rpm/RPMS/arm/qtopia-2.2.0-1.arm.rpm
>
> is it correct?
>
> Best Regards,
> Paolo
>
> On lun, 2009-12-14 at 08:45 +0000, Stuart Hughes wrote:
> > Hi Paolo,
> >
> > Make sure you have it enabled properly in the config system (./ltib -m 
> > config).  If it is, try force rebuilding with:
> > ./ltib -p qtopia -f
> >
> > Regards, Stuart
> >
> > Paolo Cremonese wrote:
> > > Hi Stuart,
> > > You are right.
> > > I follow your suggestion, and my rpm seems contains only fonts.
> > >
> > > How can I get the right one?
> > >
> > > Best regards,
> > > Paolo
> > >
> > > On ven, 2009-12-11 at 16:54 +0000, Stuart Hughes wrote:
> > > > Hi Paolo,
> > > >
> > > > Check the rpm has built and installed correctly:
> > > >
> > > > $ rpm --root `pwd`/rootfs -ql qtopia
> > > >
> > > > This will list the installed files/directories for that package.
> > > >
> > > > Regards, Stuart
> > > >
> > > > Paolo Cremonese wrote:
> > > > > Hi All,
> > > > > I have configured my image (phy3250) with Qtopia 2 package:
> > > > > The image building is successfully, but on running the following message
> > > > > is printed on the console:
> > > > >
> > > > > /etc/rc.d/init.d/qtopia: line 55: cd: /opt/Qtopia/bin: No such file or
> > > > > directory
> > > > >
> > > > > In fact, in the /opt/Qtopia theare isn't any bin dir, only a lib dir
> > > > > containing fonts.
> > > > >
> > > > > Any suggestion?
> > > > >
> > > > > Thanks in advance,
> > > > > Paolo
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > LTIB home page: http://ltib.org
> > > > >
> > > > > Ltib mailing list
> > > > > address@hidden
> > > > > http://lists.nongnu.org/mailman/listinfo/ltib