Re: [Ltib] Invoking ltib fails

[Naveen Krishna Ch]

Hi Stuart,

 

Finally our IT people had unblocked the required ports and i could checkout the LTIB sources.

Started building it & its seems going smooth.

 

I hope it worths the wait.

Will come back to you, if in case of any help.

 

Thanks for ur support.

2009/12/8 Stuart Hughes <address@hidden>

Hi Naveen,

I will try to make an upload, but can't give a timescale.  So you should try to use CVS again.

Unless it's blocked at your site you should have no trouble getting the latest from CVS using the command:

cvs -d:pserver:address@hidden:/sources/ltib co ltib

If that doesn't work ask someone who understands networking to help you.

Regards, Stuart

Naveen Krishna Ch wrote:

Hi Stuart,

 Sorry to bother you,
 I asked my IT people to unblock the site http://cvs.savannah.gnu.org/ with ip 199.232.41.69 as i found using " ip finder ".
The CVS port i found is 2041 (googled it)
for CVS access they say, they have done everything they should.
 I cant take in the sources (As u know some company polocies) from my home.
Can you please suggest me some thing or up load a tar ball as you said.
 Thanks in Advance.

2009/12/4 Stuart Hughes <address@hidden <mailto:address@hidden>>

   Hi Naveen,

   Forget ltib-6.2.2-sv it's way too old.

   I just tried CVS, it's fine.  Are you at a company that blocks this
   port?  maybe you need a proxy? If so you'll need to talk to your IT
   department.  Failing that you could check-out from a another
   location (home) that isn't blocked.

   If you can't do this, let me know and I'll try to get a new tarball
   uploaded that you can get to from a browser.


   Regards, Stuart

   Naveen Krishna Ch wrote:

       Hi Stuart,

       I was not able to checkout the CVS sources

      address@hidden LTIB]$ cvs
       -d:pserver:address@hidden:/sources/ltib co ltib
       cvs [checkout aborted]: connect to [cvs.sv.gnu.org

       <http://cvs.sv.gnu.org/> <http://cvs.sv.gnu.org

       <http://cvs.sv.gnu.org/>>]:2401 failed: Connection timed out


       I m trying with  "ltib-6.2.2-sv" and have the same problem.
       Reinstalled all the dependencies.  Still it is saying
       install/upgrade these packages.
       My suspicion is 64bit packages on X86.

       Installed:
        glibc-devel.x86_64 0:2.11-2           rpm-build.x86_64
       0:4.7.1-6.fc12           zlib.i686 0:1.2.3-23.fc12                  zlib.x86_64 0:1.2.3-23.fc12

       Can you please put some light on this issue.
       Thanks.

       2009/12/2 Stuart Hughes <address@hidden <mailto:address@hidden>

       <mailto:address@hidden <mailto:address@hidden>>>


          Hi Naveen,

          Looking again at your earlier email I see that you're using
          ltib-8-1-2-sv.  There have been many changes since then
       (including
          package detection).   You need to get the latest from CVS and
       re-try.


          Regards, Stuart

          Naveen Krishna Ch wrote:

              Hi Stuart,

              2009/12/1 Stuart Hughes <address@hidden
       <mailto:address@hidden> <mailto:address@hidden <mailto:address@hidden>>
              <mailto:address@hidden <mailto:address@hidden>
       <mailto:address@hidden <mailto:address@hidden>>>>



                 Hi Naveen,

                 You need to install the missing packages (su yum
       install ...)


              I tried that, the system says they are installed at are
       at their
              latest versions.
              address@hidden ~]$ sudo yum install glibc-devel
              [sudo] password for chnaveen:
              Loaded plugins: presto, refresh-packagekit
              updates/metalink                                                                                                                                                | 5.8 kB     00:00    Setting up
       Install Process
              Package glibc-devel-2.11-2.x86_64 already installed and
       latest
              version
              Nothing to do
              address@hidden ~]$ sudo yum install rpm-build
              Loaded plugins: presto, refresh-packagekit
              Setting up Install Process
              Package rpm-build-4.7.1-6.fc12.x86_64 already installed and
              latest version
              Nothing to do
              address@hidden ~]$

              I have 64bit processor and 64Bit Fedora 12, Could this be
       a problem
              Am i missing anything,
                               Regards, Stuart

                 Naveen Krishna Ch wrote:

                     Hi Folks,

                     I brought in a new 64bit PC installed with Fedora 12
              64bit version.
                     when i do ./ltib The build failed saying

                    address@hidden Downloads]$ cd ltib-8-1-2-sv/
                    address@hidden ltib-8-1-2-sv]$ ls
                     bin  config  COPYING  CVS  dist  doc  ltib  README
                      README-tarball.txt
                    address@hidden ltib-8-1-2-sv]$ ./ltib

                     ltib cannot be run because one or more of the host
              packages needed
                     to run it are either missing or out of date.

                     Please install/upgrade these packages and then re-try.

                     Package                Minimum ver   Installed info
                     -------                -----------   ---------------
                     glibc-devel            0             not installed
                     rpm-build              0             not installed
                     Died at ./ltib line 1267.
                     traceback:
                      main::host_checks:1267
                      main:480


                     Started: Tue Dec  1 16:32:49 2009
                     Ended:   Tue Dec  1 16:32:50 2009
                     Elapsed: 1 seconds

                     Build Failed

                     Exiting on error or interrupt
                    address@hidden ltib-8-1-2-sv]$

                     I checked both the glibc and rpm are at their
       latest versions
                     Is it a OS problem or any issue with the
       configuration.
                     What am i missing, Appreciate if someone could help me
              with this.

                     --        Shine bright,
                     (: Naveen Krishna Ch :)


                                 ------------------------------------------------------------------------

                     _______________________________________________

                     LTIB home page: http://ltib.org <http://ltib.org/>

                     Ltib mailing list
                     address@hidden <mailto:address@hidden>
       <mailto:address@hidden <mailto:address@hidden>>
              <mailto:address@hidden <mailto:address@hidden>
       <mailto:address@hidden <mailto:address@hidden>>>


                     http://lists.nongnu.org/mailman/listinfo/ltib




              --        Shine bright,
              (: Naveen Krishna Ch :)




       --        Shine bright,
       (: Naveen Krishna Ch :)




--
Shine bright,
(: Naveen Krishna Ch :)

-- 
Shine bright,
(: Naveen Krishna Ch :)