RE: [Ltib] freescale ltib config problem

[Yin Olivia-R63875]

Hi Giorgio,

Our workaround for installing LTIB on Ubuntu 9.10 include following
steps.

1. mkdir /opt/freescale and chmod 777
2. apt-get install autoconf   (for texinfo)
3. ln -s /bin/bash /bin/sh    (for dtc)
4. change ltib: line 925:     (for rpm-fs)
            # install the new package
            $cmd  = "$cf->{sudo} $cf->{rpm} ";
            $cmd .= "--root $cf->{rpmroot} ";
            $cmd .= "--dbpath $cf->{rpmdb} ";
            $cmd .= "--prefix $cf->{rpmipfx} " if $cf->{rpmipfx};
            $cmd .= "--ignorearch -ivh ";
            $cmd .= "--force "  unless $cf->{conflicts} ||
$cf->{hostinst};
            $cmd .= "--replacepkgs --replacefiles " if $cf->{hostinst};
            $cmd .= "--nodeps " if $cf->{nodeps};
            $cmd .= "--excludedocs ";
+           $cmd .= "--force-debian " if $cf->{rpm} eq 'rpm';
            $cmd .= "--define '_tmppath $cf->{tmppath}' ";
            $cmd .= "$rpm";

Maybe you could try again.

Best Regards,
Olivia

> -----Original Message-----
> From: address@hidden 
> [mailto:address@hidden On 
> Behalf Of Ing. Giorgio Marinangeli
> Sent: Wednesday, November 25, 2009 9:53 PM
> To: address@hidden
> Subject: Re: [Ltib] freescale ltib config problem
> 
> Thanks Yunlong and Stuart for your suggestions,
> 
> 
> > Which version of LTIB is this (the name of the ISO)? 
> 
> I downloaded the TLIB directly freescale web site ad tarball archive.
> It should be a special issue for freescale iMx processor.
> 
> I found the solution for the problem explained on my previous E-Mail.
> 
> I used this commands to rebuild rpm database:
> 
> su -
> rm -rf /var/lib/rpm/*__db
> rpm --rebuilddb 
> 
> also i need to change the install scrip provided with this 
> TLIB freescale version.
> 
> 
> 
> Thank.
> Giorgio
> 
> 
> 
> 
> 
>  
> Il giorno mer, 25/11/2009 alle 08.51 +0000, Stuart Hughes ha scritto:
> > Hi Giorgio,
> > 
> > Which version of LTIB is this (the name of the ISO)?  It may be an 
> > issue with an older version.  The current version on 
> Savannah CVS is 
> > known to work with Ubuntu 9.10 provided you have rpm 
> correctly installed on the host.
> > 
> > The actual failure looks as though the rpm database for the 
> host has 
> > not been initialised and/or you don't have sudo permissions.  First 
> > make sure you have sudo permissions (without password) 
> enabled for rpm 
> > as should be prompted for when you first run ltib.  Then 
> you could try 
> > running 'sudo rpm --initdb' (warning this may destroy your host rpm 
> > database, but on Ubunutu this probably doesn't matter for you).  If 
> > you do that, remove /tmp/rpm* and re-try.
> > 
> > Maybe Freescale can help with this specific version of LTIB.
> > 
> > Regards, Stuart
> > 
> > Ing. Giorgio Marinangeli wrote:
> > > Hi,
> > > 
> > > I am very new to LTIB. 
> > > 
> > > I tried to install and configure ltib [freescale vesion] 
> on my host 
> > > PC with Ubuntu 9.10.
> > > 
> > > When I try to build for the first time ltib using ./ltib 
> - m config 
> > > command ( I follow the freescale documentation ) I always get an 
> > > error and the compile process stopped.
> > > 
> > > 
> > > This is the error decribed on host_config.log file:
> > > 
> > > 
> > > [..]
> > > 
> > > librt.so.1(GLIBC_2.1) libz.so.1 perl(Archive::Tar) perl(CGI)
> > > perl(Data::Dumper) perl(File::Basename) perl(File::Copy)
> > > perl(File::stat) perl(Getopt::Long) perl(POSIX) perl(Specfile)
> > > perl(Sys::Hostname) perl(lib) perl(strict) perl(vars) 
> Checking for 
> > > unpackaged
> > > file(s): /usr/lib/rpm/check-files 
> > > /tmp/rpm-giorgio/BUILDROOT/rpm-fs-4.0.4-1.i386
> > > Wrote: /tmp/rpm-giorgio/RPMS/i686/rpm-fs-4.0.4-1.i686.rpm
> > > Executing(%clean): /bin/sh -e 
> > > /home/giorgio/ltib/ltib/tmp/rpm-tmp.tSBxjx
> > > + umask 022
> > > + cd /tmp/rpm-giorgio/BUILD
> > > + cd rpm-4.0.4
> > > + rm -rf /tmp/rpm-giorgio/BUILDROOT/rpm-fs-4.0.4-1.i386
> > > + exit 0
> > > Executing(--clean): /bin/sh
> > > -e /home/giorgio/ltib/ltib/tmp/rpm-tmp.L6hEI0
> > > + umask 022
> > > + cd /tmp/rpm-giorgio/BUILD
> > > + rm -rf rpm-4.0.4
> > > + exit 0
> > > Build time for rpm-fs: 339 seconds
> > > 
> > > error: cannot open Name index using db3 - No such file or 
> directory 
> > > (2)
> > > error: cannot open Name index using db3 - No such file or 
> directory 
> > > (2) sudo rpm --root / --dbpath /tmp/rpm-giorgio/rpmdb -e 
> > > --allmatches --nodeps --define '_tmppath 
> > > /home/giorgio/ltib/ltib/tmp' rpm-fs
> > > 2>/dev/null
> > > sudo rpm --root / --dbpath /tmp/rpm-giorgio/rpmdb 
> --ignorearch -ivh 
> > > --force --nodeps --excludedocs --define '_tmppath 
> > > /home/giorgio/ltib/ltib/tmp' 
> > > /tmp/rpm-giorgio/RPMS/i686/rpm-fs-4.0.4-1.i686.rpm
> > > rpm: please use alien to install rpm packages on Debian, 
> if you are 
> > > really sure use --force-debian switch. See README.Debian for more 
> > > details.
> > > sudo /opt/freescale/ltib/usr/bin/rpm --root / --dbpath 
> > > /opt/freescale/ltib/var/lib/rpm -Uv --justdb --notriggers 
> > > --noscripts --nodeps 
> > > /tmp/rpm-giorgio/RPMS/i686/rpm-fs-4.0.4-1.i686.rpm
> > > sudo: /opt/freescale/ltib/usr/bin/rpm: command not found
> > > mkdir: cannot create directory `/opt/freescale': Permission denied
> > > 
> > > Cannot create the download directory:
> > >  /opt/freescale/pkgs
> > > 
> > > Either change to a global directory you have write 
> permissions to, 
> > > or create it as root.  Please set the permissions to 777
> > > 
> > > traceback:
> > > main::check_dirs:2469
> > > main::host_checks:1426
> > > main:542
> > > 
> > > 
> > > Any suggestion?
> > > 
> > > Best Regards
> > > 
> > > Giorgio
> > > 
> > > 
> > > 
> > > _______________________________________________
> > > LTIB home page: http://ltib.org
> > > 
> > > Ltib mailing list
> > > address@hidden
> > > http://lists.nongnu.org/mailman/listinfo/ltib
> > > 
> > 
> 
> 
> 
> 
> _______________________________________________
> LTIB home page: http://ltib.org
> 
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib
> 
>