Re: [Ltib] Display Device on LPC3250

[Stuart Hughes]

Hi Paolo,

Just to be sure, did you run 'startx' or similar first?
Also make sure you have the frame buffer device enabled in the kernel.

Regards, Stuart

Paolo Cremonese wrote:
> Yes, I did, but:
>
>
> Can't open display ":0.0"
> address@hidden /]#
>
> Regards,
> Paolo
>
>
> On mar, 2009-11-24 at 10:47 -0200, Frias Renato-B13784 wrote:
> > > Hi ALL,
> > > I have built an image for the Phytec LPC3250 with X11 and 
> > > Qtopia 2. The LCD and touchscreen are enabled. I have 
> > > included also DILLO.
> > > The image is correctly downloaded on the target.
> > > I run DILLO, but the following message is generated:
> > >
> > > address@hidden /]#dillo
> > > paths: Cannot open file '//.dillo/dillorc'
> > > paths: Using /usr/etc/dillo/dillorc
> > > paths: Cannot open file '//.dillo/keysrc'
> > > paths: Using /usr/etc/dillo/keysrc
> > > dillo_dns_init: Here we go! (threaded)
> > > Disabling cookies.
> > > Can't open display ""
> > > address@hidden /]#
> > >
> > > as if the display (/dev/fb0) is not the default screen device.
> > >
> > > Any suggestion?
> > Did you export the DISPLAY variable before launching dillo?
> > $ export DISPLAY=:0 or $ export DISPLAY=:0.0 
> >
> > Regards,
> > Renato
>
>
>
> _______________________________________________
> LTIB home page: http://ltib.org
>
> Ltib mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/ltib