Re: [Ltib] IMX27 : problem mounting nfs rootfs

[wajih wajih]

John,
am using the following exec command:
exec -c "console=ttymxc0 root=/dev/nfs nfsroot=ServerIP:/ROOTFS"

Stuart: In my config.dev file, I have the options , that you
mentioned, correctly set .

Thanks a lot for your replies,



On 7/11/07, John Weber <address@hidden> wrote:
> Wajih -
>
> What exec command are you using?  I was able to do this on the i.MX27 board.
>
> John
>
>
> On 7/10/07, wajih wajih < address@hidden> wrote:
> >
> > Hello everybody,
> >
> > I am using imx27 board.
> > I generated a kernel and a nfs rootfs with LTIB , I have a problem
> > mounting the NFS roots on the board. The error log is below:
> > mxc_sdc_fb mxc_sdc_fb.0: fb0: DISP0 BG fb device registered successfully.
> >
> > "
> > IP-Config: Incomplete network configuration information.
> > VFS: Cannot open root device "nfs" or unknown-block(0,255)
> > Please append a correct "root=" boot option
> > Kernel panic - not syncing: VFS: Unable to mount root fs on
> unknown-block(0,255)
> > "
> > I am not using dhcp for setting up eth0,  I manually configured eth0
> > in rootfs option.
> >
> > Can anybody help me on this issue please?
> >
> > Merci and Thanks a lot in advance,
> >
> > Wajih
> >
> >
> > _______________________________________________
> > LTIB home page: http://bitshrine.org
> >
> > Ltib mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/ltib
> >