[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Build errors with GCC 14
From: |
Greg A. Woods |
Subject: |
Re: Build errors with GCC 14 |
Date: |
Mon, 20 May 2024 15:38:21 -0700 |
User-agent: |
Wanderlust/2.15.9 (Almost Unreal) SEMI-EPG/1.14.7 (Harue) FLIM-LB/1.14.9 (Gojō) APEL-LB/10.8 EasyPG/1.0.0 Emacs/26.3 (x86_64--netbsd) MULE/6.0 (HANACHIRUSATO) |
At Mon, 20 May 2024 22:09:26 +0200, Oliver Bandel <oliver@first.in-berlin.de>
wrote:
Subject: Re: Build errors with GCC 14
>
> Quoting Valery Ushakov <uwe@stderr.spb.ru> (snt: 2024-05-19 02:08 +0200
> CEST) (rcv: 2024-05-19 02:08 +0200 CEST):
> > On Sun, May 19, 2024 at 01:00:44 +0200, Matěj Cepl wrote:
> >
> > > Yes, the situation has seriously improved. The problem was
> > > that I though that https://savannah.nongnu.org/projects/lout
> > > is still the official home of the project, so I considered
> > > 3.39 to be the last official version of the project (couldn’t
> > > you do something about that?).
> >
> > https://github.com/william8000/lout is probably a good choice for the
> > upstream repo for a distro.
> >
> > -uwe
> >
>
> My impression was, that this Git-Repo was meant to be the official
> lout-Repo since it was initiated.
>
> So I'm a bit irritated, that an update appeared elsewhere.
Jeff's announcement to my old list <lout-users@lists.planix.com> only
mentioned the movement of the mailing list, nothing about repositories:
From: Jeff Kingston <jeff@it.usyd.edu.au>
To: lout-users@lists.planix.com
Subject: Lout mailing list has moved
Message-ID: <20100910212027.GA1806@cpu0.cs.usyd.edu.au>
Date: Sat, 11 Sep 2010 07:20:27 +1000
Dear Lout mailing list subscriber,
The Lout mailing list has moved. If you wish to continue
with this list, please subscribe to the new list below.
Jeff Kingston
The Lout mailing list
A public mailing list has been set up for discussion
of the Lout document formatting system. Thanks to
Rodrigo Vanegas of Brown University for starting this
list, to former maintainers Valeriy E. Ushakov and
Greg Woods, and to the current initiator, Ludovic
Courtes.
To subscribe to the list or unsubscribe, visit
http://lists.nongnu.org/mailman/listinfo/lout-users
To post a message (only subscribers can do this), send email to
lout-users@nongnu.org
It will be forwarded by email to all current subscribers.
(I should try to bring the old archive back online -- I think I can
finally do that again with my current infrastructure.)
I'm not sure who imported various versions of Lout into the repository
at savannah.nongnu.org (who is/was "civodul"?), but it was never
updated with 3.40, which was very adequately advertised by Jeff on this
new mailing list:
From: Jeff Kingston <jeff@it.usyd.edu.au>
To: lout-users@nongnu.org
Subject: Version 3.40 of Lout now available
Message-ID: <20130626003105.GA28366@cpu0.cs.usyd.edu.au>
Date: Wed, 26 Jun 2013 10:31:05 +1000
List-Archive: <http://lists.nongnu.org/archive/html/lout-users>
So, I for one never assumed there was any authority to the nongnu.org
repository.
--
Greg A. Woods <gwoods@acm.org>
Kelowna, BC +1 250 762-7675 RoboHack <woods@robohack.ca>
Planix, Inc. <woods@planix.com> Avoncote Farms <woods@avoncote.ca>
pgpW4g7aZdi7x.pgp
Description: OpenPGP Digital Signature
- Build errors with GCC 14, Matěj Cepl, 2024/05/18
- Re: Build errors with GCC 14, Greg A. Woods, 2024/05/18
- Re: Build errors with GCC 14, Jeffrey Kingston, 2024/05/18
- Re: Build errors with GCC 14, Matěj Cepl, 2024/05/18
- Re: Build errors with GCC 14, Valery Ushakov, 2024/05/18
- Re: Build errors with GCC 14, Oliver Bandel, 2024/05/20
- Re: Build errors with GCC 14,
Greg A. Woods <=
- Location of Source-Repo (Re: Build errors with GCC 14), Oliver Bandel, 2024/05/20
- Re: Location of Source-Repo (Re: Build errors with GCC 14), Greg A. Woods, 2024/05/21
- Re: Location of Source-Repo (Re: Build errors with GCC 14), Ludovic Courtès, 2024/05/24
- Re: Location of Source-Repo (Re: Build errors with GCC 14), William Bader, 2024/05/24
- Re: Location of Source-Repo (Re: Build errors with GCC 14), Greg A. Woods, 2024/05/24
- Re: Build errors with GCC 14, Matěj Cepl, 2024/05/19
- Re: Build errors with GCC 14, Matěj Cepl, 2024/05/19
- Re: Build errors with GCC 14, William Bader, 2024/05/21
- Re: Build errors with GCC 14, Matěj Cepl, 2024/05/22
- Re: Build errors with GCC 14, William Bader, 2024/05/22