Re: [Linphone-users] 4D: Linphone Desktop 4.1.1 - Qt5.9.0

[A John]

Thanks, for your reply Russell.

I have tried changing the DTMF's sending method to 'RFC 2833' and 'SIP Info', but still cannot press the on-screen dialing pad:

Is there anything else that can be changed to get this to work?

Regards,

On 27 July 2018 at 17:30, A John <address@hidden> wrote:

LINPHONE 

---------- Forwarded message ----------
From: Russell Treleaven <address@hidden>
Date: 27 July 2018 at 17:02
Subject: Re: [Linphone-users] Linphone Desktop 4.1.1 - Qt5.9.0
To: address@hidden

I think you mean that dtmf https://en.wikipedia.org/wiki/Dual-tone_multi-frequency_signaling is not being received and understood  by your peer.

look at linphone->preferences->network->transport->DTMF's sending method

RFC 2833 is typical but your peer may require SIP Info.

On Fri, Jul 27, 2018 at 11:15 AM, A John <address@hidden> wrote:

Hi,

I have successfully called and connected to a SIP number, but when prompted to enter a number on the keypad, the keypad does not respond to the numbers I have entered.

Please advise?

--

Regards,

Alex John

_______________________________________________
Linphone-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/linphone-users

--

Sincerely,

Russell Treleaven

sip:address@hiddena;transport=tcp

_______________________________________________
Linphone-users mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/linphone-users

--

Regards,

Alex John

--

Regards,

Alex John