Re: [Linphone-users] BBB interface with Linphone

[Chirag Ajmera]

wht is the output of 

lsusb

alsamixer

the default sound card / audio out device may be the HDMI audio out .. you need to change it to USB Audio Device in .linphonerc file

also I notice some errors wrt speex library 

it might not have been compiled properly !

Pls post your queries to the linphone users list so that everyone can help.

Best,

~C

On Sat, Mar 14, 2015 at 3:31 AM, Kshitij Kulkarni <address@hidden> wrote:

On Fri, Mar 13, 2015 at 2:36 PM, Kshitij Kulkarni <address@hidden> wrote:

Update 

the mic input is working . Audio out is not

On Fri, Mar 13, 2015 at 2:24 PM, Kshitij Kulkarni <address@hidden> wrote:

Hello Chirag 

Can you please guide me to the drivers for PMC2912 because it works perfect on my windows desktop .

I am very close to complete but just this is my last hurdle.

Thank you sir 

regards

Kshitij 

On Thu, Mar 12, 2015 at 10:27 AM, Chirag Ajmera <address@hidden> wrote:

Debian 7.7 with kernel update from RobertCNelson

Works for though

Try testing the sound card on windows pc first

Sent from my Windows Phone

---

From: Kshitij Kulkarni
Sent: ‎3/‎12/‎2015 10:37 PM
To: Chirag Ajmera
Subject: Re: BBB interface with Linphone

Hello Chirag 

What OS are you running for Linphone on BBB??

I am using Debian but PMC2912 is not supported.

Regards

Kshitij  

On Wed, Mar 11, 2015 at 11:48 AM, Kshitij Kulkarni <address@hidden> wrote:

Thank you for your speedy reply !!! 

On Wed, Mar 11, 2015 at 11:10 AM, Chirag Ajmera <address@hidden> wrote:

That's because linphone is not able to get the audio interface ...i ran into the same issue when bbb did not detect usb sound card

I have used TI pcm2912 based usb sound card. I'm not aware on how to interface the audio cape

You can also try cheap usb soundcard readily available locally - these are based on c media chips

Cheers,
~C

Sent from my Windows Phone

---

From: Kshitij Kulkarni
Sent: ‎3/‎11/‎2015 11:22 PM
To: address@hidden
Subject: BBB interface with Linphone

Hello Chirag 

I saw your posts online about BBB interface with Linphone.

i am trying to achieve something close too.

It would great if you could help me a bit . 

I am trying to run Linphone on BeagleBone Black.

I am using its command line interface but I have two issues.

1.     1. When call is placed the command line interface stops working. I am not able to type any more commands but  the call gets placed fine.

2.     2.  I have a BBB audio cape (http://www.digikey.com/product-search/en?x=25&y=12&lang=en&site=us&keywords=BB-BONE-DVID-02) please guide me how to interface this to linphone.

 

I am grateful for the help.

Thank you 

warm regards

Kshitij Kulkarni