Re: [Linphone-users] Fwd: Install belle-sip on raspberry-pi error

[Guillaume Beraudo]

Hi,

It is surprising that make tries to generate again the files.
Did the gneeration worked in Ubuntu?

If yes, try to comment the calls to antlr in (on your PI)
src/grammars/Makefile.am


Guillaume Beraudo

On Wed, Apr 09, 2014 at 04:25:20PM +0100, Diogo Leite wrote:
> Still not working I use ubuntu and works and I copied to the pi after doing
> ./autogen.sh and ./configure and on pi I done make but gave the same error:
> 
> Makefile:661: warning: overriding commands for target `.NOTPARALLEL'
> Makefile:655: warning: ignoring old commands for target `.NOTPARALLEL'
> /usr/bin/antlr3  -make -Xmultithreaded  -fo  . ./belle_sip_message.g
> two-threaded DFA conversion
> warning(200): ./belle_sip_message.g:1147:8: Decision can match input such
> as "CRLF" using multiple alternatives: 1, 2
> As a result, alternative(s) 2 were disabled for that input
> warning(200): ./belle_sip_message.g:1147:8: Decision can match input such
> as "SP" using multiple alternatives: 1, 2
> 
> 
> java -version on pi:
> java version "1.7.0_25"
> OpenJDK Runtime Environment (IcedTea 2.3.10) (7u25-2.3.10-1~deb7u1+rpi1)
> OpenJDK Zero VM (build 22.0-b10, mixed mode)
> 
> 
> 2014-04-09 15:43 GMT+01:00 Guillaume Beraudo <address@hidden
> >:
> 
> > Hi,
> >
> > I guess you are doing all this on your PI.
> > As a consequence, you need a JVM running on the PI since you need to
> > have some C files generated from the .g files.
> >
> > However, you may do on a PC
> > git clone, ./autogen.sh,  ./configure
> >
> > Then copy the result to you PI and do on the PI:
> > ./configure -> make -> sudo make install
> >
> >
> >
> > Anyway, if you have the openjdk on PI it works great:
> > java version "1.7.0_51"
> > OpenJDK Runtime Environment (IcedTea 2.4.6) (7u51-2.4.6-1)
> > OpenJDK 64-Bit Server VM (build 24.51-b03, mixed mode)
> >
> >
> >
> > On Wed, Apr 09, 2014 at 03:27:59PM +0100, Diogo Leite wrote:
> > > you can explain a little more please. Because now I not understand what I
> > > need to do to correct this problem.
> > >
> > > The steps I do after clone git are: ./autogen.sh -> ./configure -> make
> > ->
> > > sudo make install
> > >
> > > Thank you for your help.
> > >
> > >
> > > 2014-04-09 15:11 GMT+01:00 Guillaume Beraudo <
> > address@hidden
> > > >:
> > >
> > > > Hi,
> > > >
> > > >
> > > > Java is only required to generate some files before the compilation of
> > > > belle-sip. You may  generate these files on your main computer and copy
> > > > them to your PI.
> > > >
> > > >
> > > > Guillaume Beraudo
> > > >
> > > >
> > > > On Wed, Apr 09, 2014 at 03:02:54PM +0100, Diogo Leite wrote:
> > > > > I tried to install but I don't know if I installed the correct
> > package. I
> > > > > only found this package:
> > > > > - jvm-7-avian-jre
> > > > >
> > > > > I already tried to remove gcj too.
> > > > >
> > > > > I still have the same error when I do make.
> > > > >
> > > > >
> > > > > 2014-04-09 13:19 GMT+01:00 BIENKOWSKI Guillaume <
> > > > > address@hidden>:
> > > > >
> > > > > > Hello Diogo,
> > > > > >
> > > > > > We found that using the GCJ java virtual machine produces these
> > errors,
> > > > > > whereas using the Oracle version goes flawlessly...
> > > > > > I suggest trying to install the Oracle JVM and update your
> > > > alternatives,
> > > > > > and retry.
> > > > > >
> > > > > > Cheers,
> > > > > >
> > > > > > *Guillaume BIENKOWSKI*
> > > > > >
> > > > > > *http://www.belledonne-communications.com/
> > > > > > <http://www.belledonne-communications.com/> *
> > > > > >
> > > > > > *sip:address@hidden <address@hidden>*
> > > > > >
> > > > > >
> > > > > > On Wed, Apr 9, 2014 at 12:54 PM, Diogo Leite <
> > address@hidden
> > > > >wrote:
> > > > > >
> > > > > >> Hello,
> > > > > >>
> > > > > >> when I execute make on raspberry-pi to install belle-sip I get
> > this
> > > > error:
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >>  Makefile:574: warning: overriding commands for target
> > `.NOTPARALLEL'
> > > > > >> Makefile:568: warning: ignoring old commands for target
> > `.NOTPARALLEL'
> > > > > >> /usr/bin/antlr3  -make -Xmultithreaded  -fo  .
> > ./belle_sip_message.g
> > > > > >> two-threaded DFA conversion
> > > > > >> warning(200): ./belle_sip_message.g:1147:8: Decision can match
> > input
> > > > such
> > > > > >> as "CRLF" using multiple alternatives: 1, 2
> > > > > >> As a result, alternative(s) 2 were disabled for that input
> > > > > >> warning(200): ./belle_sip_message.g:1147:8: Decision can match
> > input
> > > > such
> > > > > >> as "SP" using multiple alternatives: 1, 2
> > > > > >> As a result, alternative(s) 2 were disabled for that input
> > > > > >> warning(200): ./belle_sip_message.g:1419:42: Decision can match
> > input
> > > > > >> such as "SP" using multiple alternatives: 1, 2, 3
> > > > > >> As a result, alternative(s) 3,2 were disabled for that input
> > > > > >> warning(200): ./belle_sip_message.g:1419:42: Decision can match
> > input
> > > > > >> such as "SEMI" using multiple alternatives: 1, 2
> > > > > >> As a result, alternative(s) 2 were disabled for that input
> > > > > >> warning(200): ./belle_sip_message.g:1419:42: Decision can match
> > input
> > > > > >> such as "CRLF" using multiple alternatives: 1, 2, 3
> > > > > >> As a result, alternative(s) 3,2 were disabled for that input
> > > > > >> error(201): ./belle_sip_message.g:1419:42: The following
> > alternatives
> > > > can
> > > > > >> never be matched: 2
> > > > > >>
> > > > > >> warning(205): ./belle_sip_message.g:454:3: ANTLR could not analyze
> > > > this
> > > > > >> decision in rule dig_resp; often this is because of recursive rule
> > > > > >> references visible from the left edge of alternatives.  ANTLR will
> > > > > >> re-analyze the decision with a fixed lookahead of k=1.  Consider
> > using
> > > > > >> "options {k=1;}" for that decision and possibly adding a syntactic
> > > > > >> predicate.
> > > > > >> error(10):  internal error:
> > > > > >> org.antlr.tool.Grammar.createLookaheadDFA(Grammar.java:1279):
> > could
> > > > not
> > > > > >> even do k=1 for decision 32; reason: timed out (>1000ms)
> > > > > >>
> > > > > >> ....................
> > > > > >>
> > > > > >> error(10):  internal error: ./belle_sip_message.g :
> > > > > >> java.lang.NullPointerException:
> > > > > >>
> > > > > >>
> > > >
> > org.antlr.analysis.DFAOptimizer.optimizeExitBranches(DFAOptimizer.java:185)
> > > > > >> org.antlr.analysis.DFAOptimizer.optimize(DFAOptimizer.java:164)
> > > > > >> org.antlr.analysis.DFAOptimizer.optimize(DFAOptimizer.java:143)
> > > > > >>
> > org.antlr.codegen.CodeGenerator.genRecognizer(CodeGenerator.java:314)
> > > > > >> org.antlr.Tool.generateRecognizer(Tool.java:641)
> > > > > >> org.antlr.Tool.process(Tool.java:454)
> > > > > >> org.antlr.Tool.main(Tool.java:91)
> > > > > >> make[3]: *** [belle_sip_messageParser.c] Error 1
> > > > > >> make[3]: Leaving directory `/home/pi/belle-sip-1.3.0/src/grammars'
> > > > > >> make[2]: *** [all-recursive] Error 1
> > > > > >> make[2]: Leaving directory `/home/pi/belle-sip-1.3.0/src'
> > > > > >> make[1]: *** [all-recursive] Error 1
> > > > > >> make[1]: Leaving directory `/home/pi/belle-sip-1.3.0'
> > > > > >> make: *** [all] Error 2
> > > > > >>
> > > > > >>
> > > > > >> Antlr version:
> > > > > >> antlr3 - version 3.2-7
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >> How I can install belle-sip on raspberry-pi?
> > > > > >>
> > > > > >> Thank you
> > > > > >>
> > > > > >>
> > > > > >> _______________________________________________
> > > > > >> Linphone-users mailing list
> > > > > >> address@hidden
> > > > > >> https://lists.nongnu.org/mailman/listinfo/linphone-users
> > > > > >>
> > > > > >>
> > > > > >
> > > > > > _______________________________________________
> > > > > > Linphone-users mailing list
> > > > > > address@hidden
> > > > > > https://lists.nongnu.org/mailman/listinfo/linphone-users
> > > > > >
> > > > > >
> > > >
> > > > > _______________________________________________
> > > > > Linphone-users mailing list
> > > > > address@hidden
> > > > > https://lists.nongnu.org/mailman/listinfo/linphone-users
> > > >
> > > >
> > > > _______________________________________________
> > > > Linphone-users mailing list
> > > > address@hidden
> > > > https://lists.nongnu.org/mailman/listinfo/linphone-users
> > > >
> >
> > > _______________________________________________
> > > Linphone-users mailing list
> > > address@hidden
> > > https://lists.nongnu.org/mailman/listinfo/linphone-users
> >
> >
> > _______________________________________________
> > Linphone-users mailing list
> > address@hidden
> > https://lists.nongnu.org/mailman/listinfo/linphone-users
> >

> _______________________________________________
> Linphone-users mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/linphone-users