[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Linphone-users] How to tell linphone which IP address to use
From: |
MJ Ray |
Subject: |
Re: [Linphone-users] How to tell linphone which IP address to use |
Date: |
Wed, 22 Feb 2012 11:25:44 +0000 |
Koos Pol <address@hidden>
> Op 21-2-2012 22:12, Gelonida N schreef:
> > - ethernet ip 192.168.0.2
> > - wifi 192.168.1.2
> > - VPN 10.8.0.2
> > [...]
> > Is there any way, that I can force linphone to register as 10.8.0.2
> > (basically to determine its IP address on a specific interface and use
> > this one)?
>
> You don't get to choose an IP address. That is a function of the network
> stack. [...]
What do
contact=<sip:address@hidden>
and
nat_address=10.8.0.2
in .linphonerc do then?
Take care with ip route if you do this, though. Make sure you can
actually reach to/from both SIP and RTP hosts over the VPN, else
it can get confusing.
Hope that helps,
--
MJ Ray (slef), member of www.software.coop, a for-more-than-profit co-op.
http://koha-community.org supporter, web and library systems developer.
In My Opinion Only: see http://mjr.towers.org.uk/email.html
Available for hire (including development) at http://www.software.coop/