linphone-users
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Linphone-users] Incoming sound problem


From: Zloty
Subject: RE: [Linphone-users] Incoming sound problem
Date: Thu, 1 Dec 2005 09:12:20 +0100

Hello,

I check on version 1.2.0-pre5 and 1.2.0-pre6 and problem still exists,
Actual I have win xp with sjphone and redhat with asterisk+linphone 
On redhat I don't have any firewall and ipforward is enabled.
I don't have only incoming sound, but I hear ringing on linphone.
Tcpdump show that packets are send from xp to redhat by eth0, and on
ifconfig I can see how counter is incrementing( for both interfaces eth and
lo). Then I think that xp communicate with asterisk by eth0 and it sent
packets to linphone by lo. But linphone doesn't got it.

I look into   Global statistics :
 number of rtp packet received=0
 number of rtp bytes received=0 bytes
Why, any sugestions? Maybe linphone don't listen on lo interface.

I can include log from asterisk.

Why in logs from linphone I see something like that
Warning:alsa_set_params: The rate 8000 Hz is not supported by your hardware.
 ==> Using 8000 Hz instead.
Is it the same, I think.

How I can reduce latency on linphone, when I check echo(asterisk) on the
same computer I got echo about 0,5s, ( I've PIII450, isn't enough).

Best regards
Robert


address@hidden linphone-1.2.0pre6]# linphonec -d 6
INFO: no logfile, logging to stdout
oRTP-message:oRTP-0.7.2pre3initialized.
Message:Found /dev/dsp.
Message:Found ALSA device: Ensoniq AudioPCI
Message:Found ALSA device: Ensoniq AudioPCI
Warning:Cannot open directory /usr/lib/linphone/plugins/mediastreamer: No
such file or directory
Warning:alsa_set_params: The rate 8000 Hz is not supported by your hardware.
 ==> Using 8000 Hz instead.

Warning:alsa_set_params: The period size 256 is not supported by your
hardware.
 ==> Using 256 instead.

Message:alsa_set_params:  blocksize=512.
Warning:alsa_set_params: The rate 8000 Hz is not supported by your hardware.
 ==> Using 8000 Hz instead.

Warning:alsa_set_params: The period size 256 is not supported by your
hardware.
 ==> Using 256 instead.

Message:alsa_set_params:  blocksize=512.
| INFO1 | <eXosip.c: 333> eXosip: Reseting timer to 15s before waking up!
| INFO1 | <eXutils.c: 416> Outgoing interface to reach 10.1.1.230 is
10.1.1.230.

| INFO1 | <eXutils.c: 416> Outgoing interface to reach 10.1.1.230 is
10.1.1.230.

| INFO2 | <osip_transaction.c: 130> allocating transaction ressource 1
985656913
| INFO2 | <nict.c: 36> allocating NICT context
Ready.
linphonec> | INFO2 | <eXutils.c: 492> IPv4 address detected: 10.1.1.230
| INFO2 | <eXutils.c: 541> DNS resolution with 10.1.1.230:5060
| INFO1 | <jcallback.c: 148> Message sent: 
REGISTER sip:address@hidden SIP/2.0
Via: SIP/2.0/UDP 10.1.1.230:25060;rport;branch=z9hG4bK142363793
From: <sip:address@hidden>;tag=1017599984
To: <sip:address@hidden>
Call-ID: address@hidden
CSeq: 1 REGISTER
Contact: <sip:address@hidden:25060>
Max-Forwards: 5
User-Agent: Linphone-1.2.0pre6/eXosip
Expires: 600
Content-Length: 0

 (len=16 sizeof(addr)=128 28)
| INFO1 | <jcallback.c: 525> cb_sndregister (id=1)
| INFO1 | <eXosip.c: 340> eXosip: timer sec:0 usec:495123!
| INFO1 | <udp.c: 2193> Received message: 
SIP/2.0 100 Trying
Via: SIP/2.0/UDP
10.1.1.230:25060;rport;branch=z9hG4bK142363793;received=10.1.1.230
From: <sip:address@hidden>;tag=1017599984
To: <sip:address@hidden>
Call-ID: address@hidden
CSeq: 1 REGISTER
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Max-Forwards: 70
Contact: <sip:address@hidden>
Content-Length: 0


| INFO3 | <osip_event.c: 84> MESSAGE REC. CALLID:985656913
| INFO1 | <jcallback.c: 601> cb_rcv1xx (id=1)
| INFO1 | <eXosip.c: 340> eXosip: timer sec:0 usec:493211!
| INFO1 | <udp.c: 2193> Received message: 
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP
10.1.1.230:25060;rport;branch=z9hG4bK142363793;received=10.1.1.230
From: <sip:address@hidden>;tag=1017599984
To: <sip:address@hidden>;tag=as4c87be7c
Call-ID: address@hidden
CSeq: 1 REGISTER
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Max-Forwards: 70
Contact: <sip:address@hidden>
WWW-Authenticate: Digest realm="asterisk", nonce="175ae16f"
Content-Length: 0


| INFO3 | <osip_event.c: 84> MESSAGE REC. CALLID:985656913
| INFO1 | <jcallback.c: 1437> cb_rcv4xx (id=1)
| INFO1 | <eXosip.c: 340> eXosip: timer sec:4 usec:999985!
Message:REGISTRATION_FAILURE

Message:cfg= sip:address@hidden, cfg->rid=1, rid=1
| INFO2 | <nict.c: 129> free nict ressource
| INFO1 | <eXutils.c: 416> Outgoing interface to reach 10.1.1.230 is
10.1.1.230.

| INFO2 | <eXosip.c: 2123> INFO: authinfo: "asterisk" "asterisk"
| INFO1 | <eXosip.c: 2214> authinfo: zloty
| INFO2 | <osip_transaction.c: 130> allocating transaction ressource 2
985656913
| INFO2 | <nict.c: 36> allocating NICT context
| INFO2 | <eXutils.c: 492> IPv4 address detected: 10.1.1.230
| INFO2 | <eXutils.c: 541> DNS resolution with 10.1.1.230:5060
| INFO1 | <jcallback.c: 148> Message sent: 
REGISTER sip:address@hidden SIP/2.0
Via: SIP/2.0/UDP 10.1.1.230:25060;rport;branch=z9hG4bK420678613
From: <sip:address@hidden>;tag=1017599984
To: <sip:address@hidden>
Call-ID: address@hidden
CSeq: 2 REGISTER
Contact: <sip:address@hidden:25060>
Authorization: Digest username="zloty", realm="asterisk", nonce="175ae16f",
uri="sip:address@hidden", response="5748d16b12a6082cf135b41b90c442ea",
algorithm=MD5
Max-Forwards: 5
User-Agent: Linphone-1.2.0pre6/eXosip
Expires: 600
Content-Length: 0

 (len=16 sizeof(addr)=128 28)
| INFO1 | <jcallback.c: 525> cb_sndregister (id=2)
| INFO1 | <eXosip.c: 340> eXosip: timer sec:0 usec:496645!
| INFO1 | <udp.c: 2193> Received message: 
SIP/2.0 100 Trying
Via: SIP/2.0/UDP
10.1.1.230:25060;rport;branch=z9hG4bK420678613;received=10.1.1.230
From: <sip:address@hidden>;tag=1017599984
To: <sip:address@hidden>
Call-ID: address@hidden
CSeq: 2 REGISTER
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Max-Forwards: 70
Contact: <sip:address@hidden>
Content-Length: 0


| INFO3 | <osip_event.c: 84> MESSAGE REC. CALLID:985656913
| INFO1 | <jcallback.c: 601> cb_rcv1xx (id=2)
| INFO1 | <eXosip.c: 340> eXosip: timer sec:0 usec:494973!
| INFO1 | <udp.c: 2193> Received message: 
SIP/2.0 200 OK
Via: SIP/2.0/UDP
10.1.1.230:25060;rport;branch=z9hG4bK420678613;received=10.1.1.230
From: <sip:address@hidden>;tag=1017599984
To: <sip:address@hidden>;tag=as4c87be7c
Call-ID: address@hidden
CSeq: 2 REGISTER
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Max-Forwards: 70
Expires: 600
Contact: <sip:address@hidden:25060>;expires=600
Date: Thu, 01 Dec 2005 03:52:11 GMT
Content-Length: 0


| INFO3 | <osip_event.c: 84> MESSAGE REC. CALLID:985656913
| INFO1 | <jcallback.c: 1213> cb_rcv2xx (id=2)
| INFO1 | <eXosip.c: 340> eXosip: timer sec:4 usec:999985!
Registration on sip:address@hidden sucessful.
Message:cfg= sip:address@hidden, cfg->rid=1, rid=1
| INFO1 | <udp.c: 2193> Received message: 
INVITE sip:address@hidden:25060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.230:5060;branch=z9hG4bK1ca8d7c5;rport
From: "Robert" <sip:address@hidden>;tag=as013f2e80
To: <sip:address@hidden:25060>
Contact: <sip:address@hidden>
Call-ID: address@hidden
CSeq: 102 INVITE
User-Agent: Asterisk PBX
Max-Forwards: 70
Date: Thu, 01 Dec 2005 03:52:15 GMT
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Content-Type: application/sdp
Content-Length: 209

v=0
o=root 7285 7285 IN IP4 10.1.1.230
s=session
c=IN IP4 10.1.1.230
t=0 0
m=audio 17546 RTP/AVP 3 101
a=rtpmap:3 GSM/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=silenceSupp:off - - - -

| INFO3 | <osip_event.c: 84> MESSAGE REC.
CALLID:60a5eeb93fc191a337ea2fdf4547d60a
| INFO1 | <udp.c: 2230> This is a request
| INFO2 | <osip_transaction.c: 130> allocating transaction ressource 3
60a5eeb93fc191a337ea2fdf4547d60a
| INFO2 | <ist.c: 32> allocating IST context
| INFO1 | <eXutils.c: 416> Outgoing interface to reach 10.1.1.230 is
10.1.1.230.

| INFO1 | <jcallback.c: 332> cb_rcvinvite (id=3)
| INFO2 | <eXutils.c: 492> IPv4 address detected: 10.1.1.230
| INFO2 | <eXutils.c: 541> DNS resolution with 10.1.1.230:5060
| INFO1 | <jcallback.c: 148> Message sent: 
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 10.1.1.230:5060;branch=z9hG4bK1ca8d7c5;rport=5060
From: "Robert" <sip:address@hidden>;tag=as013f2e80
To: <sip:address@hidden:25060>
Call-ID: address@hidden
CSeq: 102 INVITE
Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, MESSAGE, INFO
Content-Length: 0

 (len=16 sizeof(addr)=128 28)
| INFO1 | <jcallback.c: 1669> cb_snd1xx (id=3)
| INFO2 | <eXutils.c: 492> IPv4 address detected: 10.1.1.230
| INFO2 | <eXutils.c: 541> DNS resolution with 10.1.1.230:5060
| INFO1 | <jcallback.c: 148> Message sent: 
SIP/2.0 101 Dialog Establishement
Via: SIP/2.0/UDP 10.1.1.230:5060;branch=z9hG4bK1ca8d7c5;rport=5060
From: "Robert" <sip:address@hidden>;tag=as013f2e80
To: <sip:address@hidden:25060>;tag=2046923003
Call-ID: address@hidden
CSeq: 102 INVITE
Contact: <sip:address@hidden:25060>
Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, MESSAGE, INFO
Content-Length: 0

 (len=16 sizeof(addr)=128 28)
| INFO1 | <jcallback.c: 1669> cb_snd1xx (id=3)
| INFO1 | <eXosip.c: 340> eXosip: timer sec:0 usec:738207!
| INFO1 | <eXosip.c: 340> eXosip: timer sec:0 usec:737896!
Message:CALL_NEW

| INFO1 | <eXutils.c: 416> Outgoing interface to reach 15.128.128.93 is
10.1.1.230.

| INFO1 | <eXutils.c: 416> Outgoing interface to reach 10.1.1.230 is
10.1.1.230.

"Robert" <sip:address@hidden> is calling you.
| INFO1 | <eXutils.c: 416> Outgoing interface to reach 10.1.1.230 is
10.1.1.230.

Warning:alsa_set_params: The rate 8000 Hz is not supported by your hardware.
 ==> Using 8000 Hz instead.

Warning:alsa_set_params: The period size 256 is not supported by your
hardware.
 ==> Using 256 instead.

Message:alsa_set_params:  blocksize=512.
Message:Starting local ring...
Message:ms_filter_add_link: ringplay,0 -> OssWrite,0
Message:Opening sound card [Ensoniq AudioPCI (Advanced Linux Sound
Architecture)] in playback mode with stereo=1,rate=44100,bits=16
Warning:alsa_set_params: The rate 44100 Hz is not supported by your
hardware.
 ==> Using 44100 Hz instead.

Message:alsa_set_params:  blocksize=5120.
| INFO2 | <eXutils.c: 492> IPv4 address detected: 10.1.1.230
| INFO2 | <eXutils.c: 541> DNS resolution with 10.1.1.230:5060
| INFO1 | <jcallback.c: 148> Message sent: 
SIP/2.0 180 Ringing
Via: SIP/2.0/UDP 10.1.1.230:5060;branch=z9hG4bK1ca8d7c5;rport=5060
From: "Robert" <sip:address@hidden>;tag=as013f2e80
To: <sip:address@hidden:25060>;tag=2046923003
Call-ID: address@hidden
CSeq: 102 INVITE
Contact: <sip:address@hidden:25060>
Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, MESSAGE, INFO
Content-Length: 0

 (len=16 sizeof(addr)=128 28)
| INFO1 | <jcallback.c: 1669> cb_snd1xx (id=3)
| INFO1 | <eXosip.c: 340> eXosip: timer sec:0 usec:710797!
| INFO1 | <jcallback.c: 217> cb_nict_kill_transaction (id=2)
| INFO1 | <eXosip.c: 333> eXosip: Reseting timer to 15s before waking up!
answer
Message:Mediastreamer processing thread is exiting.
Message:Closing writing channel of soundcard.
| INFO1 | <eXutils.c: 416> Outgoing interface to reach 10.1.1.230 is
10.1.1.230.

Connected.
oRTP-warning:rtp_session_set_jitter_compensation: cannot set because the
payload type (0) is unknown
Message:ms_filter_add_link: OssRead,0 -> GSMEncoder,0
Message:ms_filter_add_link: GSMEncoder,0 -> RTPSend,0
Message:ms_filter_add_link: RTPRecv,0 -> GSMDecoder,0
Message:ms_filter_add_link: GSMDecoder,0 -> OssWrite,0
Message:Opening sound card [Ensoniq AudioPCI (Advanced Linux Sound
Architecture)] in capture mode with stereo=0,rate=8000,bits=16
Message:alsa_set_params:  blocksize=512.
Message:Opening sound card [Ensoniq AudioPCI (Advanced Linux Sound
Architecture)] in playback mode with stereo=0,rate=8000,bits=16
Warning:alsa_set_params: The rate 8000 Hz is not supported by your hardware.
 ==> Using 8000 Hz instead.

Warning:alsa_set_params: The period size 256 is not supported by your
hardware.
 ==> Using 256 instead.

Message:alsa_set_params:  blocksize=512.
linphonec> | INFO2 | <eXutils.c: 492> IPv4 address detected: 10.1.1.230
| INFO2 | <eXutils.c: 541> DNS resolution with 10.1.1.230:5060
| INFO1 | <jcallback.c: 148> Message sent: 
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.1.1.230:5060;branch=z9hG4bK1ca8d7c5;rport=5060
From: "Robert" <sip:address@hidden>;tag=as013f2e80
To: <sip:address@hidden:25060>;tag=2046923003
Call-ID: address@hidden
CSeq: 102 INVITE
Contact: <sip:address@hidden:25060>
Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, MESSAGE, INFO
Content-Type: application/sdp
Content-Length:   194

v=0
o=zloty 123456 654321 IN IP4 10.1.1.230
s=A conversation
c=IN IP4 10.1.1.230
t=0 0
m=audio 27078 RTP/AVP 3 101
a=rtpmap:3 GSM/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
 (len=16 sizeof(addr)=128 28)
| INFO1 | <jcallback.c: 1684> cb_snd2xx (id=3)
| INFO1 | <eXosip.c: 333> eXosip: Reseting timer to 15s before waking up!
| INFO1 | <udp.c: 2193> Received message: 
ACK sip:address@hidden:25060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.230:5060;branch=z9hG4bK490cfd46;rport
From: "Robert" <sip:address@hidden>;tag=as013f2e80
To: <sip:address@hidden:25060>;tag=2046923003
Contact: <sip:address@hidden>
Call-ID: address@hidden
CSeq: 102 ACK
User-Agent: Asterisk PBX
Max-Forwards: 70
Content-Length: 0


| INFO3 | <osip_event.c: 84> MESSAGE REC.
CALLID:60a5eeb93fc191a337ea2fdf4547d60a
| INFO1 | <udp.c: 2230> This is a request
| INFO1 | <eXosip.c: 333> eXosip: Reseting timer to 15s before waking up!
| INFO1 | <udp.c: 2193> Received message: 
INVITE sip:address@hidden:25060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.230:5060;branch=z9hG4bK2748d6c5;rport
From: "Robert" <sip:address@hidden>;tag=as013f2e80
To: <sip:address@hidden:25060>;tag=2046923003
Contact: <sip:address@hidden>
Call-ID: address@hidden
CSeq: 103 INVITE
User-Agent: Asterisk PBX
Max-Forwards: 70
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
X-asterisk-info: SIP re-invite (RTP bridge)
Content-Type: application/sdp
Content-Length: 283

v=0
o=root 7285 7286 IN IP4 10.1.1.239
s=session
c=IN IP4 10.1.1.239
t=0 0
m=audio 49160 RTP/AVP 0 3 8 97 101
a=rtpmap:0 PCMU/8000
a=rtpmap:3 GSM/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:97 iLBC/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=silenceSupp:off - - - -

| INFO3 | <osip_event.c: 84> MESSAGE REC.
CALLID:60a5eeb93fc191a337ea2fdf4547d60a
| INFO1 | <udp.c: 2230> This is a request
| INFO2 | <osip_transaction.c: 130> allocating transaction ressource 4
60a5eeb93fc191a337ea2fdf4547d60a
| INFO2 | <ist.c: 32> allocating IST context
| INFO1 | <eXutils.c: 416> Outgoing interface to reach 10.1.1.230 is
10.1.1.230.

| INFO1 | <jcallback.c: 332> cb_rcvinvite (id=4)
| INFO2 | <eXutils.c: 492> IPv4 address detected: 10.1.1.230
| INFO2 | <eXutils.c: 541> DNS resolution with 10.1.1.230:5060
| INFO1 | <jcallback.c: 148> Message sent: 
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 10.1.1.230:5060;branch=z9hG4bK2748d6c5;rport=5060
From: "Robert" <sip:address@hidden>;tag=as013f2e80
To: <sip:address@hidden:25060>;tag=2046923003
Call-ID: address@hidden
CSeq: 103 INVITE
Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, MESSAGE, INFO
Content-Length: 0

 (len=16 sizeof(addr)=128 28)
| INFO1 | <jcallback.c: 1669> cb_snd1xx (id=4)
| INFO2 | <eXutils.c: 492> IPv4 address detected: 10.1.1.230
| INFO2 | <eXutils.c: 541> DNS resolution with 10.1.1.230:5060
| INFO1 | <jcallback.c: 148> Message sent: 
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.1.1.230:5060;branch=z9hG4bK2748d6c5;rport=5060
From: "Robert" <sip:address@hidden>;tag=as013f2e80
To: <sip:address@hidden:25060>;tag=2046923003
Call-ID: address@hidden
CSeq: 103 INVITE
Contact: <sip:address@hidden:25060>
Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, MESSAGE, INFO
Content-Type: application/sdp
Content-Length:   160

v=0
o=userX 20000001 20000001 IN IP4 10.1.1.230
s=session
c=IN IP4 10.1.1.230
t=0 0
m=audio 10500 RTP/AVP 0 8
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
 (len=16 sizeof(addr)=128 28)
| INFO1 | <jcallback.c: 1684> cb_snd2xx (id=4)
| INFO1 | <eXosip.c: 333> eXosip: Reseting timer to 15s before waking up!
| INFO1 | <eXosip.c: 333> eXosip: Reseting timer to 15s before waking up!
| INFO1 | <udp.c: 2193> Received message: 
ACK sip:address@hidden:25060 SIP/2.0
Via: SIP/2.0/UDP 10.1.1.230:5060;branch=z9hG4bK4dabaaf1;rport
From: "Robert" <sip:address@hidden>;tag=as013f2e80
To: <sip:address@hidden:25060>;tag=2046923003
Contact: <sip:address@hidden>
Call-ID: address@hidden
CSeq: 103 ACK
User-Agent: Asterisk PBX
Max-Forwards: 70
Content-Length: 0


| INFO3 | <osip_event.c: 84> MESSAGE REC.
CALLID:60a5eeb93fc191a337ea2fdf4547d60a
| INFO1 | <udp.c: 2230> This is a request
| INFO1 | <eXosip.c: 333> eXosip: Reseting timer to 15s before waking up!
Message:CALL_ACK

Message:CALL_HOLD ou OFFHOLD

Message:CALL_ACK

terminate| INFO1 | <eXosip.c: 333> eXosip: Reseting timer to 15s before
waking up!

| INFO1 | <eXutils.c: 416> Outgoing interface to reach 10.1.1.230 is
10.1.1.230.

| INFO2 | <osip_transaction.c: 130> allocating transaction ressource 5
60a5eeb93fc191a337ea2fdf4547d60a
| INFO2 | <nict.c: 36> allocating NICT context
Message:Mediastreamer processing thread is exiting.
| INFO2 | <eXutils.c: 492> IPv4 address detected: 10.1.1.230
| INFO2 | <eXutils.c: 541> DNS resolution with 10.1.1.230:5060
| INFO1 | <jcallback.c: 148> Message sent: 
BYE sip:address@hidden SIP/2.0
Via: SIP/2.0/UDP 10.1.1.230:25060;rport;branch=z9hG4bK1248993035
From: <sip:address@hidden:25060>;tag=2046923003
To: "Robert" <sip:address@hidden>;tag=as013f2e80
Call-ID: address@hidden
CSeq: 103 BYE
Contact: <sip:address@hidden:25060>
Max-Forwards: 5
User-Agent: Linphone-1.2.0pre6/eXosip
Content-Length: 0

 (len=16 sizeof(addr)=128 28)
| INFO1 | <jcallback.c: 530> cb_sndbye (id=5)
| INFO1 | <eXosip.c: 340> eXosip: timer sec:0 usec:498998!
Message:Closing reading channel of soundcard.
Message:Closing writing channel of soundcard.
oRTP-stats-message:
   Global statistics :
 number of rtp packet sent=788
 number of rtp bytes sent=35460 bytes
 number of rtp packet received=0
 number of rtp bytes received=0 bytes
 number of incoming rtp bytes successfully delivered to the application=0 
 number of times the application queried a packet that didn't exist=1580 
 number of rtp packets received too late=0
 number of rtp packets skipped=0
 number of bad formatted rtp packets=0
 number of packet discarded because of queue overflow=0

Communication ended.
linphonec> | INFO1 | <udp.c: 2193> Received message: 
SIP/2.0 200 OK
Via: SIP/2.0/UDP
10.1.1.230:25060;rport;branch=z9hG4bK1248993035;received=10.1.1.230
From: <sip:address@hidden:25060>;tag=2046923003
To: "Robert" <sip:address@hidden>;tag=as013f2e80
Call-ID: address@hidden
CSeq: 103 BYE
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Max-Forwards: 70
Contact: <sip:address@hidden>
Content-Length: 0
X-Asterisk-HangupCause: Normal Clearing


| INFO3 | <osip_event.c: 84> MESSAGE REC.
CALLID:60a5eeb93fc191a337ea2fdf4547d60a
| INFO1 | <jcallback.c: 1213> cb_rcv2xx (id=5)
| INFO1 | <eXosip.c: 340> eXosip: timer sec:4 usec:999978!
| INFO1 | <eXosip.c: 340> eXosip: timer sec:0 usec:6535!
| INFO1 | <jcallback.c: 217> cb_nict_kill_transaction (id=5)
| INFO2 | <udp.c: 2371> eXosip: eXosip_release_finished_calls remove a
dialog
| INFO1 | <udp.c: 2606> eXosip: remove a call
| INFO1 | <udp.c: 2622> Release a terminated transaction
| INFO2 | <osip_transaction.c: 288> free transaction ressource 3
60a5eeb93fc191a337ea2fdf4547d60a
| INFO2 | <ist.c: 85> free ist ressource
| INFO1 | <udp.c: 2622> Release a terminated transaction
|  BUG  | <osip_transaction.c: 265> transaction already removed from list 5!
| INFO2 | <osip_transaction.c: 288> free transaction ressource 5
60a5eeb93fc191a337ea2fdf4547d60a
| INFO2 | <nict.c: 129> free nict ressource
| INFO1 | <udp.c: 2622> Release a terminated transaction
| INFO2 | <osip_transaction.c: 288> free transaction ressource 4
60a5eeb93fc191a337ea2fdf4547d60a
| INFO2 | <ist.c: 85> free ist ressource
| INFO1 | <eXosip.c: 333> eXosip: Reseting timer to 15s before waking up!
| INFO1 | <eXosip.c: 333> eXosip: Reseting timer to 15s before waking up!
Message:CALL_RELEASED

quit
linphonec> 
|  BUG  | <osip_transaction.c: 265> transaction already removed from list 2!
| INFO2 | <nict.c: 129> free nict ressource
| INFO1 | <eXutils.c: 416> Outgoing interface to reach 10.1.1.230 is
10.1.1.230.

| INFO2 | <osip_transaction.c: 130> allocating transaction ressource 6
985656913
| INFO2 | <nict.c: 36> allocating NICT context
| INFO2 | <eXutils.c: 492> IPv4 address detected: 10.1.1.230
| INFO2 | <eXutils.c: 541> DNS resolution with 10.1.1.230:5060
| INFO1 | <jcallback.c: 148> Message sent: 
REGISTER sip:address@hidden SIP/2.0
Via: SIP/2.0/UDP 10.1.1.230:25060;rport;branch=z9hG4bK588408792
From: <sip:address@hidden>;tag=1017599984
To: <sip:address@hidden>
Call-ID: address@hidden
CSeq: 3 REGISTER
Contact: <sip:address@hidden:25060>
Max-Forwards: 5
User-Agent: Linphone-1.2.0pre6/eXosip
Expires: 0
Content-Length: 0

 (len=16 sizeof(addr)=128 28)
| INFO1 | <jcallback.c: 525> cb_sndregister (id=6)
| INFO1 | <eXosip.c: 340> eXosip: timer sec:0 usec:499232!
| INFO1 | <udp.c: 2193> Received message: 
SIP/2.0 100 Trying
Via: SIP/2.0/UDP
10.1.1.230:25060;rport;branch=z9hG4bK588408792;received=10.1.1.230
From: <sip:address@hidden>;tag=1017599984
To: <sip:address@hidden>
Call-ID: address@hidden
CSeq: 3 REGISTER
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Max-Forwards: 70
Contact: <sip:address@hidden>
Content-Length: 0


| INFO3 | <osip_event.c: 84> MESSAGE REC. CALLID:985656913
| INFO1 | <jcallback.c: 601> cb_rcv1xx (id=6)
| INFO1 | <eXosip.c: 340> eXosip: timer sec:0 usec:496732!
| INFO1 | <udp.c: 2193> Received message: 
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP
10.1.1.230:25060;rport;branch=z9hG4bK588408792;received=10.1.1.230
From: <sip:address@hidden>;tag=1017599984
To: <sip:address@hidden>;tag=as4f0d0700
Call-ID: address@hidden
CSeq: 3 REGISTER
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Max-Forwards: 70
Contact: <sip:address@hidden>
WWW-Authenticate: Digest realm="asterisk", nonce="6eeb357a"
Content-Length: 0


| INFO3 | <osip_event.c: 84> MESSAGE REC. CALLID:985656913
| INFO1 | <jcallback.c: 1437> cb_rcv4xx (id=6)
| INFO1 | <eXosip.c: 340> eXosip: timer sec:4 usec:999987!
Message:REGISTRATION_FAILURE

Message:cfg= sip:address@hidden, cfg->rid=1, rid=1
| INFO2 | <nict.c: 129> free nict ressource
| INFO1 | <eXutils.c: 416> Outgoing interface to reach 10.1.1.230 is
10.1.1.230.

| INFO2 | <eXosip.c: 2123> INFO: authinfo: "asterisk" "asterisk"
| INFO1 | <eXosip.c: 2214> authinfo: zloty
| INFO2 | <osip_transaction.c: 130> allocating transaction ressource 7
985656913
| INFO2 | <nict.c: 36> allocating NICT context
| INFO2 | <eXutils.c: 492> IPv4 address detected: 10.1.1.230
| INFO2 | <eXutils.c: 541> DNS resolution with 10.1.1.230:5060
| INFO1 | <jcallback.c: 148> Message sent: 
REGISTER sip:address@hidden SIP/2.0
Via: SIP/2.0/UDP 10.1.1.230:25060;rport;branch=z9hG4bK1016139707
From: <sip:address@hidden>;tag=1017599984
To: <sip:address@hidden>
Call-ID: address@hidden
CSeq: 4 REGISTER
Contact: <sip:address@hidden:25060>
Authorization: Digest username="zloty", realm="asterisk", nonce="6eeb357a",
uri="sip:address@hidden", response="c192cf97e697cdcc103d033969c23ba1",
algorithm=MD5
Max-Forwards: 5
User-Agent: Linphone-1.2.0pre6/eXosip
Expires: 0
Content-Length: 0

 (len=16 sizeof(addr)=128 28)
| INFO1 | <jcallback.c: 525> cb_sndregister (id=7)
| INFO1 | <eXosip.c: 340> eXosip: timer sec:0 usec:499240!
| INFO1 | <udp.c: 2193> Received message: 
SIP/2.0 100 Trying
Via: SIP/2.0/UDP
10.1.1.230:25060;rport;branch=z9hG4bK1016139707;received=10.1.1.230
From: <sip:address@hidden>;tag=1017599984
To: <sip:address@hidden>
Call-ID: address@hidden
CSeq: 4 REGISTER
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Max-Forwards: 70
Contact: <sip:address@hidden>
Content-Length: 0


| INFO3 | <osip_event.c: 84> MESSAGE REC. CALLID:985656913
| INFO1 | <jcallback.c: 601> cb_rcv1xx (id=7)
| INFO1 | <eXosip.c: 340> eXosip: timer sec:0 usec:496991!
| INFO1 | <udp.c: 2193> Received message: 
SIP/2.0 200 OK
Via: SIP/2.0/UDP
10.1.1.230:25060;rport;branch=z9hG4bK1016139707;received=10.1.1.230
From: <sip:address@hidden>;tag=1017599984
To: <sip:address@hidden>;tag=as4f0d0700
Call-ID: address@hidden
CSeq: 4 REGISTER
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Max-Forwards: 70
Expires: 0
Date: Thu, 01 Dec 2005 03:52:53 GMT
Content-Length: 0


| INFO3 | <osip_event.c: 84> MESSAGE REC. CALLID:985656913
| INFO1 | <jcallback.c: 1213> cb_rcv2xx (id=7)
| INFO1 | <eXosip.c: 340> eXosip: timer sec:4 usec:999984!
Registration on sip:address@hidden sucessful.
Message:cfg= sip:address@hidden, cfg->rid=1, rid=1
| INFO1 | <jreg.c: 80> Release a non-terminated transaction
| INFO2 | <osip_transaction.c: 288> free transaction ressource 7 985656913
| INFO2 | <nict.c: 129> free nict ressource
address@hidden linphone-1.2.0pre6]#
-----------------------------------------

---
Scheduling destruction of call 'address@hidden' in 15000 ms
sip no debug
SIP Debugging Disabled
*CLI>

-----Original Message-----
From: Simon Morlat [mailto:address@hidden 
Sent: Wednesday, November 30, 2005 6:16 PM
To: address@hidden
Cc: Zloty
Subject: Re: [Linphone-users] Incoming sound problem

Hello,

First please try with linphone-1.2.0pre6 available at 
http://simon.morlat.free.fr/download/unstable
then, if the problem persists, send me a full call log using "linphone 
--verbose"
Thanks

Simon

Le Lundi 28 Novembre 2005 01:42, Zloty a écrit :
> Hi,
>
> I just installed environment to test linphone, and I have problem with
> sound.
> I have two computers :
> 1. win xp with sjphone
> 2. red hat 9 (two sound cards), (asterisk 1.0.7 and linphone 1.0.1 (1.1.0)
> )
>
>
> Both clients linphone and sjphone register in asterisk. I can make call
> from sjphone to asterisk - ok
> linphone to asterisk - ok
> linphone to asterisk - I don't hear this which I tell on sjphone,
>
> Previous I'm think that it's problem with config file, I ad if_name=eth0,
> but it doesn't help.
>
> I check both versions 1.0.1 and 1.1.0 and result are the same.
>
> Any suggestions?
>
> Anyway I've problem with libspeex and 1.1.0 configuration, the solution
> were very simply, install libspeex from rpm not from source.
>
> Regards
> Robert
>
>
>
>
> _______________________________________________
> Linphone-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/linphone-users






reply via email to

[Prev in Thread] Current Thread [Next in Thread]