Hello,
Dont consider previous one, actually it shows this error at the
installation time.
''''''''''''''''''''''''''''''''''''''''''''''''''
make[1]: Leaving directory
`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/exosip'
Making install in coreapi
make[1]: Entering directory
`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
make[2]: Entering directory
`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
test -z "/usr/lib" || mkdir -p -- . "/armbuild/usr/lib"
/bin/sh ../libtool --mode=install /usr/bin/install -c
'liblinphone.la' '/armbuild/usr/lib/liblinphone.la'
libtool: install: warning: relinking `liblinphone.la'
(cd /home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi;
/bin/sh ../libtool --mode=relink armv4l-unknown-linux-gcc -Wall
-Werror -DENABLE_TRACE -DG_LOG_DOMAIN="LinphoneCore" -DINET6
-D_ORTP_SOURCE -02 -fno-exceptions -I../support -o liblinphone.la
-rpath /usr/lib -version-info 2:0:1 linphonecore.lo exevents.lo misc.lo
arts.lo enum.lo sdphandler.lo presence.lo proxy.lo friend.lo
authentication.lo lpconfig.lo chat.lo
../mediastreamer/libmediastreamer.la ../exosip/libeXosip.la -ldl
-inst-prefix-dir /armbuild)
mv: can't stat source liblinphone.so.1.1.0
libtool: install: error: relink `liblinphone.la' with the above command
before installing it
make[2]: *** [install-libLTLIBRARIES] Error 1
make[2]: Leaving directory
`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
make[1]: *** [install-am] Error 2
make[1]: Leaving directory
`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/coreapi'
make: *** [install-recursive] Error 1
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Kushal Dalal
Embedded Engineer
eInfochips Limited.
Email: address@hidden
Kushal Dalal wrote:
Hello,
Thanks again. It solved my compilation problem.
But at time of installation it shows following error.
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
Making all in console
make[2]: Entering directory
`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/console'
/bin/sh ../libtool --mode=link armv4l-unknown-linux-gcc -Wall -Werror
-DENABLE_TRACE -D_ORTP_SOURCE -O2 -fno-exceptions -I../support
../oRTP/src/libortp.la -L/armbuild/usr/lib -lspeex -lm
-L/armbuild/usr/lib -losipparser2 -losip2 -o linphonec linphonec.o
commands.o ../coreapi/liblinphone.la -ldl
armv4l-unknown-linux-gcc -Wall -Werror -DENABLE_TRACE -D_ORTP_SOURCE
-O2 -fno-exceptions -I../support -o .libs/linphonec linphonec.o
commands.o ../oRTP/src/.libs/libortp.so -L/armbuild/usr/lib -lspeex
-lm -losipparser2 -losip2 ../coreapi/.libs/liblinphone.so -ldl
armv4l-unknown-linux-gcc: ../coreapi/.libs/liblinphone.so: No such file
or directory
make[2]: *** [linphonec] Error 1
make[2]: Leaving directory
`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0/console'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory
`/home/kushaldalal/docs/SIP/linphone/new/linphone-1.1.0'
make: *** [all] Error 2
''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''
please help me to solve it.
Thanks
-Kushal
Kushal Dalal
Embedded Engineer
eInfochips Limited.
Email: address@hidden
Simon Morlat wrote:
I think I already see that with arm-gcc-2.95: just turn off optimisation
(remove -02 in the gsmlib/Makefile) and it works.
Simon
Le Mercredi 19 Octobre 2005 13:28, Kushal Dalal a écrit :
Hello,
Thanks. I am able to compile Speex-1.0.5 with my toolchain.
Previously I was trying Speex-1.1.6. It's ok as it is enough.
Now while compiling linphone as mentioned in README.arm,
it gives following error.
I have pasted that part..
""""""""""""""""""
source='code.c' object='code.lo' libtool=yes \
depfile='.deps/code.Plo' tmpdepfile='.deps/code.TPlo' \
depmode=gcc /bin/sh ../depcomp \
/bin/sh ../libtool --mode=compile armv4l-unknown-linux-gcc
-DHAVE_CONFIG_H -I. -I. -I.. -O2 -fno-exceptions -w -O2
-fno-exceptions -I../support -c -o code.lo code.c
armv4l-unknown-linux-gcc -DHAVE_CONFIG_H -I. -I. -I.. -O2
-fno-exceptions -w -O2 -fno-exceptions -I../support -c code.c
-Wp,-MD,.deps/code.TPlo -fPIC -DPIC -o .libs/code.o
/tmp/ccM7d2bX.s: Assembler messages:
/tmp/ccM7d2bX.s:96: Error: Can not represent OFFSET_IMM8 relocation in
this object file format (1)
/tmp/ccM7d2bX.s:98: Error: Can not represent OFFSET_IMM8 relocation in
this object file format (1)
make: *** [code.lo] Error 1
"""""""""""""""""""""""""""""""""""""""""""""
Can I compile without GSM codec as I don't need it?
Or how to solve above problem?
Thanks in advance.
-Kushal
Kushal Dalal
Embedded Engineer
eInfochips Limited.
Email: address@hidden
Simon Morlat wrote:
Hello,
The speex dependency is mandatory.
However it is quite easy to cross compile speex on arm:
taken from my README.arm in linphone's tree:
Cross compiling speex for ARM:
********************************
First you need to remove ogg headers from your build system to avoid a
dirty conflict between
your build machine binaries and the arm binaries. They are usually in a
libogg-dev package (rpm or deb).
Then:
./configure --prefix=/usr --host=arm-linux --with-gnu-ld --disable-static
--enable-fixed-point --enable-arm-asm
make
make install DESTDIR=$ARM_INSTALL_TREE
make install DESTDIR='pwd'/armbuild
Simon
Le Mardi 18 Octobre 2005 15:17, Kushal Dalal a écrit :
Hello,
I am cross compiling linphonec-1.1.0 for ARM - MIZI Embedded Linux
platform.(for Samsung S3C2410 board.)
I am using cross compilaton tool chain by MIZI.
I would like to remove speex depedancy for the package.
I tried "--with-speex=no" and "--without-speex" while running configure
script.
But it is not working. I think there is a bug in that script at speex
part. What could be the solution?
Even I am not able to cross compile Speex with my tool chain !!..
Thanks in advance.
-Kushal Dalal
Disclaimer: This e-mail and any attachment is for authorized use by the
intended recipients only. It may contain proprietary material,
confidential information and/or be subject to legal privilege of
eInfochips Ltd. If you have received this message in error, please notify
the originator immediately. If you are not the intended recipient, you
are notified that you are strictly Prohibited from retaining, using,
copying, altering or disclosing the contents of this message.
Disclaimer: This e-mail and any attachment is for authorized use by the intended recipients only. It may contain proprietary material, confidential information and/or be subject to legal privilege of eInfochips Ltd. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly Prohibited from retaining, using, copying, altering or disclosing the contents of this message.
|