Re: [Linphone-users] Linphone - installation problem

[Ravi]

Dear Martijn,

Thanks a lot for your reply.  I tried the same and it has worked.  Gr8 help.

Thanks!!

Regards,
Ravindra

----- Original Message ----- 
From: "Martijn de Gouw" <address@hidden>
To: "Ravi" <address@hidden>
Cc: <address@hidden>
Sent: Friday, September 23, 2005 5:33 PM
Subject: RE: [Linphone-users] Linphone - installation problem


> Have you checked your permissions on the /dev/dsp device?
> It should be writeable for everyone.
>
>
> > -----Original Message-----
> > From:
> > address@hidden
> > [mailto:address@hidden
> gnu.org] On Behalf Of Ravi
> > Sent: vrijdag 23 september 2005 12:04
> > To: Ashok
> > Cc: address@hidden
> > Subject: Re: [Linphone-users] Linphone - installation problem
> >
> >
> > Dear Ashok,
> >
> > Thanks for your reply. I tried all stuffs but in vain.  I tried it on
> > another PC and it has worked. (Don't know what was the problem)
> >
> > But I am facing another problem - When I try to execute call
> > the system
> > gives error:
> > "Warning: Linphone could not open audio device /dev/dsp (Open
> > Sound System).
> > Check if your sound card is fully configured and working."
> >
> > I have checked the card and configuration.  It is working
> > fine.  I have
> > tested it through Linux sound card testing wizard.
> > It is cirus logic card and I can hear the test sound.
> > I am using P3 and 128 RAM, and console based linphone (linphonec).
> >
> > Please help me out in this regard.
> >
> > Thanks in advance!!
> >
> >
> > Regards,
> > Ravindra
> >
> > ----- Original Message ----- 
> > From: "Ashok" <address@hidden>
> > To: "'Ravi'" <address@hidden>
> > Sent: Thursday, September 22, 2005 8:47 PM
> > Subject: RE: [Linphone-users] Linphone - installation problem
> >
> >
> > > Try also removing libspeekx* from /usr/local/lib
> > >
> > > -----Original Message-----
> > > From: Ravi [mailto:address@hidden
> > > Sent: Wednesday, August 17, 2005 6:54 AM
> > > To: Ashok; address@hidden
> > > Cc: address@hidden
> > > Subject: Re: [Linphone-users] Linphone - installation problem
> > >
> > >
> > > Dear Ashok,
> > >
> > > Thanks for your reply.  But still same problem I am facing.  I have
> > followed
> > > all the steps you have given.  Don't know what is the problem.
> > >
> > > I have even checked function speex_encode_int().  Its
> > available. But still
> > > same error.
> > >
> > > Error message is
> > >
> > > "configure: error: Could not find a libspeex version that have the
> > > speex_encode_int() function. Please install libspeex=1.0.5 or
> > > libspeex>=1.1.6"
> > >
> > >
> > > Please help me!!
> > >
> > > Regards,
> > > Ravindra
> > >
> > > ----- Original Message ----- 
> > > From: "Ashok" <address@hidden>
> > > To: <address@hidden>; "'Ravi'" <address@hidden>
> > > Cc: <address@hidden>
> > > Sent: Friday, September 09, 2005 7:19 PM
> > > Subject: RE: [Linphone-users] Linphone - sipomatic problem
> > >
> > >
> > > > I had a similar problem and this is what I did and is working:
> > > >
> > > > 1. Remove libspeex.so.* from /usr/lib
> > > > 2. Rebbot machine
> > > > 3. Run ./configure from speex directory
> > > > 4. Run make
> > > > 5. Run make install
> > > > 6. run ldconfig
> > > > 7. run ./configure from linphone-1-1.0
> > > >
> > > > Good luck!!
> > > >
> > > > - Ashok
> > > >
> > > > -----Original Message-----
> > > > From: address@hidden
> > > >
> > [mailto:address@hidden On
> > > Behalf
> > > > Of Marcel Karras
> > > > Sent: Thursday, September 08, 2005 9:32 AM
> > > > To: Ravi
> > > > Cc: address@hidden
> > > > Subject: Re: [Linphone-users] Linphone - sipomatic problem
> > > >
> > > > Ravi sagte:
> > > > >
> > > > > Thanks Marcel for your quick reply.
> > > > >
> > > > > I have already done ldconfig, but still same error.
> > > >
> > > > If you still have libspeex-* files in the output of
> > ldconfig you should
> > > > remove these files manually out of the library directory.
> > After this you
> > > > should install the newest libary version.
> > > >
> > > > > Also can you provide me with the link, which gives me
> > information on
> > how
> > > > > to use linphone.  I am using Linphone as UA and partysip as SIP
> > server.
> > > > > I have searched on google, but the links provided by it
> > has't given
> > > > > sufficient information.
> > > >
> > > > The homepage: http://linphone.org/?lang=us&rubrique=4
> > > > Deeper infos are to be found in the source code distribution.
> > > >
> > > > Regards
> > > > - Marcel
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Linphone-users mailing list
> > > > address@hidden
> > > > http://lists.nongnu.org/mailman/listinfo/linphone-users
> > > >
> > >
> > >
> > > *********************************************************
> > > Disclaimer:
> > >
> > > The contents of this E-mail (including the contents of the
> > enclosure(s) or
> > > attachment(s) if any) are privileged and confidential
> > material of MBT and
> > > should not be disclosed to, used by or copied in any manner
> > by anyone
> > other
> > > than the intended addressee(s).   In case you are not the desired
> > addressee,
> > > you should delete this message and/or re-direct it to the
> > sender.  The
> > views
> > > expressed in this E-mail message (including the enclosure(s) or
> > > attachment(s) if any) are those of the individual sender,
> > except where the
> > > sender expressly, and with authority, states them to be the
> > views of MBT.
> > >
> > > This e-mail message including attachment/(s), if any, is
> > believed to be
> > free
> > > of any virus.  However, it is the responsibility of the recipient to
> > ensure
> > > that it is virus free and MBT is not responsible for any
> > loss or damage
> > > arising in any way from its use
> > >
> > > *********************************************************
> > >
> >
> >
> > *********************************************************
> > Disclaimer:
> >
> > The contents of this E-mail (including the contents of the
> > enclosure(s) or attachment(s) if any) are privileged and
> > confidential material of MBT and should not be disclosed to,
> > used by or copied in any manner by anyone other than the
> > intended addressee(s).   In case you are not the desired
> > addressee, you should delete this message and/or re-direct it
> > to the sender.  The views expressed in this E-mail message
> > (including the enclosure(s) or attachment(s) if any) are
> > those of the individual sender, except where the sender
> > expressly, and with authority, states them to be the views of MBT.
> >
> > This e-mail message including attachment/(s), if any, is
> > believed to be free of any virus.  However, it is the
> > responsibility of the recipient to ensure that it is virus
> > free and MBT is not responsible for any loss or damage
> > arising in any way from its use
> >
> > *********************************************************
> >
> >
> > _______________________________________________
> > Linphone-users mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/linphone-users
> >
>


*********************************************************
Disclaimer:

The contents of this E-mail (including the contents of the enclosure(s) or 
attachment(s) if any) are privileged and confidential material of MBT and 
should not be disclosed to, used by or copied in any manner by anyone other 
than the intended addressee(s).   In case you are not the desired addressee, 
you should delete this message and/or re-direct it to the sender.  The views 
expressed in this E-mail message (including the enclosure(s) or attachment(s) 
if any) are those of the individual sender, except where the sender expressly, 
and with authority, states them to be the views of MBT.

This e-mail message including attachment/(s), if any, is believed to be free of 
any virus.  However, it is the responsibility of the recipient to ensure that 
it is virus free and MBT is not responsible for any loss or damage arising in 
any way from its use

*********************************************************