[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Linphone-users] linphonec 1.0.0pre8 / wrong phonenumber-message
From: |
David Schumacher |
Subject: |
Re: [Linphone-users] linphonec 1.0.0pre8 / wrong phonenumber-message |
Date: |
Fri, 25 Feb 2005 21:55:04 +0100 |
User-agent: |
Mozilla Thunderbird 1.0 (Windows/20041206) |
hello mikhail,
here is my asterisk-configuration:
--snip--
--- /etc/asterisk/capi.conf: ---
[general]
nationalprefix=0
internationalprefix=00
rxgain=0.8
txgain=0.8
[interfaces]
msn=4296154
incomingmsn=4296154
controller=1
softdtmf=1
accountcode=
context=default
devices=2
--- /etc/asterisk/sip.conf ---
[general]
disallow=all ; Disallow all codecs
allow=ulaw ; Allow codecs in order of preference
bindport=5060
bindaddr=192.168.1.217
[dave]
type=friend
host=192.168.1.214
regexten=dave
context=default
permit=0.0.0.0/0.0.0.0
--- /etc/asterisk/extensions.conf ---
[general]
static=yes
writeprotect=no
autofallthrough=yes
[default]
; outbound:
exten => _0.,1,Dial(CAPI/4296154:B${EXTEN},180)
exten => _0.,102,Busy
; inbound:
exten => 4296154,1,Dial(SIP/address@hidden|30|tr)
--snap--
in linphone i could dial out wihout any configuration by dialing
"sip:address@hidden".
(0123456789 is the remote phonennumber, 192.168.1.217 ist the ip of the
asterisk-server)
for inbound calls (from isdn to to linphonec) i think at least the
address@hidden has to be set (?).
unfortunately, at the moment the linphonec - laptop is switched off and
not reachable
pysically or over the net, so i cant copy the .linphonec - configfile.
i hope this helps, dave
Mikhail Ramendik wrote:
В сообщении от 24 Февраль 2005 22:52 David Schumacher написал(a):
i'am uing linphonec 1.0.0pre8 with libosip2 2.2.0 with asterisk
CVS-HEAD-02/03/05-22:32:08 as a voip <> isdn-gateway using chan_capi.
How did you manage to configure the asterisk proxy? Perhaps you could give me
your config as an example (cutting out the passwords of course, and maybe
altering hostnames too)? I also use Asterisk but could not find a way to
configure linphonec 1.0.0pre8 for it.