Re: [Linphone-users] linphone-1.0.0pre5 crash on start !

[Simon Morlat]

I fear that you are not running the good linphone version...
It is very easy to make something wrong with shared libraries.
If you compile from sources, you must install linphone and take care that you 
do not have different linphone's shared lib (like liblinphone.so) in 
different places for example /usr/lib and /usr/local/lib
Normally the bug you had was fixed in 1.0.0pre5.

When I compile from source on my machine I always do
./configure --prefix=/usr --disable-static && make && make install
and then run /usr/bin/linphone



Le Samedi 18 Décembre 2004 15:01, zouhair Soussi a écrit :
> hi,
> Thanx Samuel Mimram :)
>
> but, same problem with your patch ):
> >From: Samuel Mimram <address@hidden>
> >To: zouhair Soussi <address@hidden>
> >CC: address@hidden
> >Subject: Re: [Linphone-users] linphone-1.0.0pre5 crash on start !
> >Date: Sat, 18 Dec 2004 10:54:51 +0100
> >
> >Hello,
> >
> >I have already faced this bug while packaging linphone for debian. Here is
> >my patch. I hope it will work for you.
> >
> >Cheers,
> >
> >Samuel.
> >
> >zouhair Soussi wrote:
> >>address@hidden:~$ gdb /usr/local/bin/linphone
> >>GNU gdb 6.1.1
> >>Copyright 2004 Free Software Foundation, Inc.
> >>GDB is free software, covered by the GNU General Public License, and you
> >>are
> >>welcome to change it and/or distribute copies of it under certain
> >>conditions.
> >>Type "show copying" to see the conditions.
> >>There is absolutely no warranty for GDB.  Type "show warranty" for
> >>details.
> >>This GDB was configured as "i486-slackware-linux"...(no debugging symbols
> >>found)...U                                                       sing
> >> host libthread_db library "/lib/libthread_db.so.1".
> >>
> >>(gdb) handle SIGPIPE nostop
> >>Signal        Stop      Print   Pass to program Description
> >>SIGPIPE       No        Yes     Yes             Broken pipe
> >>(gdb) run
> >>Starting program: /usr/local/bin/linphone
> >>(no debugging symbols found)...(no debugging symbols found)...(no
> >>debugging symbols
> >>found)...(no debugging symbols found)...(no debugging symbols
> >> found)...(no debugging                                                  
> >>      symbols found)...[Thread debugging using libthread_db enabled]
> >>[New Thread 16384 (LWP 13458)]
> >>(no debugging symbols found)...(no debugging symbols found)...(no
> >>debugging symbols
> >>found)...(no debugging symbols found)...(no debugging symbols
> >> found)...(no debugging                                                  
> >>      symbols found)...(no debugging symbols found)...(no debugging
> >> symbols found)...(no debugging symbols found)...(no debugging symbols
> >> found)...(no debugging symbols foun d)...(no debugging symbols
> >> found)...(no debugging symbols found)...(no debugging sym
> >>                                      bols found)...(no debugging symbols
> >>found)...(no debugging symbols found)...(no debu
> >>                             gging symbols found)...(no debugging symbols
> >>found)...(no debugging symbols found)..
> >>                    .(no debugging symbols found)...(no debugging symbols
> >>found)...(no debugging symbols
> >>            found)...(no debugging symbols found)...(no debugging symbols
> >>found)...(no debuggin
> >>  g symbols found)...(no debugging symbols found)...(no debugging symbols
> >>found)...(no
> >>debugging symbols found)...(no debugging symbols found)...(no debugging
> >>symbols fou
> >>nd)...(no debugging symbols found)...(no debugging symbols found)...(no
> >>debugging sy                                                       mbols
> >>found)...(no debugging symbols found)...(no debugging symbols
> >> found)...(no deb                                                      
> >> ugging symbols found)...(no debugging symbols found)...(no debugging
> >> symbols found). ..(no debugging symbols found)...(no debugging symbols
> >> found)...(no debugging symbol
> >>                                         s found)...(no debugging symbols
> >>found)...(no debugging symbols found)...(no debuggi
> >>                                ng symbols found)...(no debugging symbols
> >>found)...(no debugging symbols found)...(n
> >>                       o debugging symbols found)...(no debugging symbols
> >>found)...(no debugging symbols fo
> >>
> >>                     und)...(no debugging symbols found)...(no debugging
> >>symbols found)...(no debugging s
> >>             ymbols found)...(no debugging symbols found)...(no debugging
> >>symbols found)...(no de
> >>    bugging symbols found)...(no debugging symbols found)...(no debugging
> >>symbols found)
> >>...MediaStreamer-Message: Found /dev/dsp.
> >>MediaStreamer-Message: Found ALSA device: VIA 8235
> >>LinphoneCore-Message: Choosing alsa device /dev/dsp (Open Sound System)
> >> by default.
> >>[New Thread 32769 (LWP 13462)]
> >>[New Thread 16386 (LWP 13463)]
> >>
> >>Program received signal SIGSEGV, Segmentation fault.
> >>[Switching to Thread 16384 (LWP 13458)]
> >>0x409cf984 in strcmp () from /lib/libc.so.6
> >>(gdb) bt
> >>#0  0x409cf984 in strcmp () from /lib/libc.so.6
> >>#1  0x40926480 in ms_audio_codec_info_get () from
> >>/usr/local/lib/liblinphone.so.1
> >>#2  0x4091e716 in linphone_core_setup_local_rtp_profile ()
> >>   from /usr/local/lib/liblinphone.so.1
> >>#3  0x4091a920 in codecs_config_read () from
> >>/usr/local/lib/liblinphone.so.1
> >>#4  0x4091ac6c in linphone_core_init () from
> >>/usr/local/lib/liblinphone.so.1
> >>#5  0x0805062b in linphone_gnome_init ()
> >>#6  0x0804fe65 in main ()
> >>(gdb) quit
> >>The program is running.  Exit anyway? (y or n) y
> >>
> >>thanx for answer :)
> >>
> >>>From: Simon Morlat <address@hidden>
> >>>To: address@hidden
> >>>CC: "zouhair Soussi" <address@hidden>
> >>>Subject: Re: [Linphone-users] linphone-1.0.0pre5 crash on start !
> >>>Date: Fri, 17 Dec 2004 14:52:28 +0100
> >>>
> >>>Hello,
> >>>
> >>>Can you execute it from gdb ?
> >>>
> >>>Thanks
> >>>Simon
> >>>
> >>>Le Jeudi 9 Décembre 2004 20:21, zouhair Soussi a écrit :
> >>> > hi,
> >>> >
> >>> > linphone-1.0.0pre4, linphone-1.0.0pre5 build ok, crash on start up !
> >>> > this bug, is not fixed ?
> >>> >
> >>> > Crash message:
> >>> > "L'application « linphone » a quitté inopinément.
> >>> > Vous pouvez informer les développeurs de ce qui vient d'arriver pour
> >>>
> >>>les
> >>>
> >>> > aider à résoudre le problème. Ou vous pouvez redémarrer l'application
> >>> > maintenant."
> >>> >
> >>> > :~$ /usr/local/bin/linphone
> >>> >
> >>> > MediaStreamer-Message: Found /dev/dsp.
> >>> > MediaStreamer-Message: Found ALSA device: VIA 8235
> >>> > LinphoneCore-Message: Choosing alsa device /dev/dsp (Open Sound
> >>>
> >>>System) by
> >>>
> >>> > default.
> >>> >
> >>> > | INFO1 | <eXosip.c: 273> eXosip: Reseting timer to 15s before waking
> >>>
> >>>up!
> >>>
> >>> > is buil with:  gcc-3.3.4
> >>> > sound driver: alsa-1.0.6
> >>> > gtk                  :gtk+2-2.4.10
> >>> > gnome            :libgnome-2.6.1.1
> >>> >
> >>> > Simon Morlat, any idea ?
> >>> >
> >>> > thanx.
> >>> >
> >>> > _________________________________________________________________
> >>> > MSN Messenger : dialoguez en temps réel avec vos amis !
> >>> > http://g.msn.fr/FR1001/866
> >>> >
> >>> >
> >>> >
> >>> > _______________________________________________
> >>> > Linphone-users mailing list
> >>> > address@hidden
> >>> > http://lists.nongnu.org/mailman/listinfo/linphone-users
> >>
> >>_________________________________________________________________
> >>MSN Messenger : dialoguez en temps réel avec vos amis !
> >>http://g.msn.fr/FR1001/866
> >>
> >>
> >>
> >>_______________________________________________
> >>Linphone-users mailing list
> >>address@hidden
> >>http://lists.nongnu.org/mailman/listinfo/linphone-users
> >
> >#! /bin/sh /usr/share/dpatch/dpatch-run
> >## mscodec_null_name.dpatch by Samuel Mimram <address@hidden>
> >##
> >## All lines beginning with `## DP:' are a description of the patch.
> >## DP: Check if the name arguments are NULL (if it's the case, we should
> >return NULL).
> >
> >@DPATCH@
> >diff -urNad linphone-1.0.0pre4/mediastreamer/mscodec.c
> >/tmp/dpep.w47mIR/linphone-1.0.0pre4/mediastreamer/mscodec.c
> >--- linphone-1.0.0pre4/mediastreamer/mscodec.c       2003-06-08
> >08:17:54.000000000 +0200
> >+++ /tmp/dpep.w47mIR/linphone-1.0.0pre4/mediastreamer/mscodec.c      
> >2004-10-31
> >16:51:30.000000000 +0100
> >@@ -69,7 +69,7 @@
> >  {
> >     GList *elem=filter_list;
> >     MSFilterInfo *info;
> >-    while (elem!=NULL)
> >+    while (elem!=NULL && name!=NULL)
> >     {
> >             info=(MSFilterInfo *)elem->data;
> >             if ( (info->type==MS_FILTER_AUDIO_CODEC) ){
> >@@ -87,7 +87,7 @@
> >  {
> >     GList *elem=filter_list;
> >     MSFilterInfo *info;
> >-    while (elem!=NULL)
> >+    while (elem!=NULL && name!=NULL)
> >     {
> >             info=(MSFilterInfo *)elem->data;
> >             if ( (info->type==MS_FILTER_VIDEO_CODEC) ){
> >@@ -122,7 +122,7 @@
> >  {
> >     GList *elem=filter_list;
> >     MSFilterInfo *info;
> >-    while (elem!=NULL)
> >+    while (elem!=NULL && name!=NULL)
> >     {
> >             info=(MSFilterInfo *)elem->data;
> >             if ((info->type==MS_FILTER_AUDIO_CODEC) ||
> >(info->type==MS_FILTER_VIDEO_CODEC)){
> >@@ -140,7 +140,7 @@
> >  {
> >     GList *elem=filter_list;
> >     MSFilterInfo *info;
> >-    while (elem!=NULL)
> >+    while (elem!=NULL && name!=NULL)
> >     {
> >             info=(MSFilterInfo *)elem->data;
> >             if ((info->type==MS_FILTER_AUDIO_CODEC) ||
> >(info->type==MS_FILTER_VIDEO_CODEC)){
>
> _________________________________________________________________
> Nouveau MSN Hotmail : choisissez votre adresse @hotmail.fr !
> http://www.msn.fr/newmsnhotmail