RE: [Linphone-users]Codecs not usable in linphone 0.9.1

[Aymeric Moizard]

Because you have specified an ethernet interface
where the bandwith is not enough to use the codec
in red.

Aymeric

On Mon, 27 Jan 2003, Ketul Sakhpara wrote:

> Hi,
>      I pasted the log I see on Linphone start.
>
>
> | INFO1 | <osipua.c: 59> Starting osip stack and osipua layer.
>
> | INFO1 | <udp.c: 76> Entering osipua thread.
>
> MediaStreamer-Message: Detected /dev/dsp -
>
> MediaStreamer-WARNING **: Unable to find mixer for id 1.
> MediaStreamer-Message: Detected /dev/dsp1 -
> MediaStreamer-Message: Detected /dev/dsp2 -
>
> Gdk-WARNING **: locale not supported by C library
> Found 2 interfaces.
> Found eth0 interface with ip address 192.168.51.229
>
> GnomeUI-WARNING **: Could not open help topics file NULL
> Adding <sip:address@hidden> to the list of alias.
> Message: Added audio payload type to SDP properties 115 lpc10-1.5/8000/1
> Message: Added audio payload type to SDP properties 111 speex_lbr-4/8000/1
>
> ** WARNING **: General level is quite low (0). Linphone rises it up for you.
>
> MediaStreamer-WARNING **: Cannot open audio device with id 0: Resource
> temporari
> ly unavailable.
>
>
> --Ketul
>
>
> -----Original Message-----
> From: Ketul Sakhpara [mailto:address@hidden
> Sent: Monday, January 27, 2003 2:45 PM
> To: 'address@hidden'
> Subject: [Linphone-users]Codecs not usable in linphone 0.9.1
>
>
>
> Hi,
>    I'm using Linphone 0.9.1 and I see 4 of the 6 available codecs in Red, in
> the parameters configuration window. I understand the Warning: "Codecs in
> red are not usable" but wanted to know as to what should I do to make them
> usable.
>
> Thanks!
> Ketul
>
>