|
From: | Saumil Gandhi |
Subject: | Re: [Linphone-developers] Enforcing TCP as transport protocol |
Date: | Mon, 18 Aug 2014 13:06:51 +0530 |
[sip]
guess_hostname=1
inc_timeout=15
register_only_when_network_is_up=1
auto_net_state_mon=0
auto_answer_replacing_calls=1
media_encryption_mandatory=0
use_info=0
use_ipv6=0
keepalive_period=600
ping_with_options=1
default_proxy=0
sip_port=0
sip_tcp_port=5060
sip_tls_port=0
udp_port=0
[proxy_0]
reg_proxy=<sip:sip.mydomain.com;transport=tcp>
reg_route=<sip:sip.mydomain.com;transport=tcp>
reg_expires=600
======
I have created a TCP DNS SRV record for sip.mydomain.com as well. However, when I launch my android apk, while the proxy server is picked up correctly, but the protocol is still set to UDP. Further, because my reg_route is set correctly, my outbound proxy should be selected by default, but even this is not being picked up and it comes up an unchecked in the settings.
I have observed that sometimes, when the apk crashes and restarts, it picks up both these settings correctly. Not sure if that helps, but thought I'd mention if it points to anything useful.
Thanks,
Saumil
Hi Luiz,I setup TCP DNS SRV record for my servers. I have two questions:
1. Are there any changes I need to make to the config file?2. I pass sip.tcp.mydomain.com as the domain parameter while initiating a linphone login with the apk, but it does not work (I get a Fails to Register). If I pass my IP address it works3. My IP mapping is correct, because if I test my sip.tcp.mydomain.com on web.linphone.org, I am able to sign-on to my SIP account.So wondering what I need to do within my Android client so that I am able to register to my server.Thanks,SaumilOn Wed, Jul 23, 2014 at 6:46 PM, Saumil Gandhi <address@hidden> wrote:Hi Luiz,I don't think I do. Is that necessary for enforcing TCP? I was hoping I could configure my Linphone android client to use TCP as the transport protocol, and be done with it. Am I wrong in that assumption?Thanks,SaumilOn Wed, Jul 23, 2014 at 6:08 PM, Luiz Silva <address@hidden> wrote:Hello,Do you have the TCP DNS SRV record for your servers? something like _sip._tcp.yourdomain.com ?LuizOn Tue, Jul 22, 2014 at 6:55 AM, Saumil Gandhi <address@hidden> wrote:_______________________________________________Hi,My linphonerc_default looks like this:===[net]
download_bw=380
upload_bw=380
firewall_policy=2
stun_server=my.stun.server.ip
[sip]
contact=sip:address@hidden
use_info=0
use_ipv6=0
keepalive_period=30000
ping_with_options=1
default_proxy=0
sip_port=0
sip_tcp_port=5060
sip_tls_port=0
udp_port=0
[proxy_0]
reg_proxy=<sip:my.server.ip;transport=tcp>
reg_route=<sip:my.server.ip;transport=tcp>
[video]
size=qvga
enabled=1
display=1
show_local=1
self_view=1
automatically_initiate=1
automatically_accept=1
[app]
sharing_server=https://www.linphone.org:444/upload.php
tunnel=disabled
[tunnel]
host=
port=443
===Any reason that TCP is not being picked up as the default transport protocol? I always seem to be getting UDP when I compile the apk.Thanks,Saumil
Linphone-developers mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/linphone-developers
_______________________________________________
Linphone-developers mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/linphone-developers
[Prev in Thread] | Current Thread | [Next in Thread] |