[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Linphone-developers] c# mono linphone
From: |
Ed Holland |
Subject: |
Re: [Linphone-developers] c# mono linphone |
Date: |
Wed, 16 Jan 2013 07:54:22 +0000 |
You can use any command support by linphonec through linphonecsh through
the "generic" command. For example.
linphonecsh generic "answer"
This will of course require you to have registered against a SIP server
and so forth, but I’m sure you've already figured that part out if you
can successfully make calls.
Yours
Ed Holland
On Wed, 2013-01-16 at 08:38 +0100, Per Cramer wrote:
> Hi.
>
>
>
> We are running an embedded linux board and we are programming for it
> using mono / c#. I now would like to control an instance of linphone
> (or liblinphone) from our program. I have seen the samples on the site
> using linphonec / linphoecsh to start calls using a shell. But that is
> only for starting calls (as far as I can see). But I would also like
> to receive some info on incoming cals of course.
>
>
>
> So are there other ways on how to do this? I read somewhere that there
> is a named pipe that could be used. But there isn’t much info to find
> on that either. Which commands can be used with this pipe for example?
>
>
>
> Regards,
>
>
>
> Per
>
>
> plain text document attachment (ATT00001)
> _______________________________________________
> Linphone-developers mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/linphone-developers