[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Linphone-developers] Linphone-android, Prepare_sources.sh at > >> c
|
From: |
Guillaume BERAUDO |
|
Subject: |
Re: [Linphone-developers] Linphone-android, Prepare_sources.sh at > >> cygwin with the message 'VP8 prepare stage failed.' |
|
Date: |
Thu, 9 Aug 2012 13:22:40 +0200 |
Hi list,
For the record, I had a misconfigured tool chain error when my android
ndk was a symlink to the real one.
Cheers,
Guillaume
Le Thu, 9 Aug 2012 09:22:03 +0000,
Lau KhimChuen <address@hidden> a écrit :
>
> After installed the toolchains from CodeSourcery, no more complain
> about the 'arm-none-linux-gnueabi-gcc'. Thanks.
>
> But the issue now is cannot find the input file from /tmp directory.
>
> - The input file is in the /tmp directory (i purposely commented out
> the remove file function 'rm' so that the tmp file will always be
> there), and it just cannot find it.
>
> clean_temp_files() {
> log "Hello World!"
> # rm -f ${TMP_C} ${TMP_H} ${TMP_O} ${TMP_X} ${TMP_ASM}
> }
>
> - try 'arm-none-linux-gnueabi-gcc /tmp/a.c' will get 'No such file or
> directory', but it can compile without the /tmp by putting in the
> same folder
>
> - its no problem with the 'gcc' even in /tmp folder, its work with
> gcc compiler.
>
> - permission looks alright :
>
> address@hidden /
> $ ls -l
> total 213
> drwxr-xr-x+ 1 kclau root 0 Aug 8 15:49 bin
> dr-xr-xr-x 1 kclau Domain Users 0 Aug 9 16:27 cygdrive
> -rwxr-xr-x 1 kclau root 57 Jul 28 2011 Cygwin.bat
> -rw-r--r-- 1 kclau root 157097 Aug 3 17:12 Cygwin.ico
> -rw-r--r-- 1 kclau root 53342 Aug 3 17:12
> Cygwin-Terminal.ico drwxr-xr-x+ 1 kclau Domain Users 0 Aug 3
> 16:09 dev drwxr-xr-x+ 1 kclau root 0 Aug 3 17:09 etc
> drwxrwxrwt+ 1 kclau root 0 Jul 28 2011 home
> drwxr-xr-x+ 1 kclau root 0 Aug 3 16:34 lib
> drwxr-xr-x+ 1 kclau root 0 Jul 28 2011 opt
> dr-xr-xr-x 13 kclau Domain Users 0 Aug 9 16:27 proc
> drwxr-xr-x+ 1 kclau root 0 Jul 28 2011 sbin
> drwxr-xr-x+ 1 kclau Domain Users 0 Jul 28 2011 srv
> drwxrwxrwx+ 1 kclau root 0 Aug 9 15:43 tmp
> drwxr-xr-x+ 1 kclau root 0 Aug 3 16:23 usr
> drwxr-xr-x+ 1 kclau root 0 Jul 28 2011 var
>
>
>
> Anyone faced the same issue before?
>
> Thanks & regards
> KC Lau.
>
>
>
>
> ------------------------------------------config.err log
> ---------------------------------------
>
> # ./configure --target=armv7-android-gcc
> --sdk-path=/cygdrive/c/android-ndk-r8b --enable-error-concealment
> Configuring selected codecs enabling vp8_encoder
> enabling vp8_decoder
> Configuring for target 'armv7-android-gcc'
> enabling armv7
> enabling armv6
> enabling armv5te
> enabling fast_unaligned
> add_asflags --defsym ARCHITECTURE=7
> check_cflags -march=armv7-a -mcpu=cortex-a8 -mfpu=neon
> -mfloat-abi=softfp check_cc -march=armv7-a -mcpu=cortex-a8 -mfpu=neon
> -mfloat-abi=softfp BEGIN /tmp/vpx-conf-2868-24275.c
> 1 int x;
> END /tmp/vpx-conf-2868-24275.c
> arm-none-linux-gnueabi-gcc -march=armv7-a -mcpu=cortex-a8 -mfpu=neon
> -mfloat-abi=softfp -c -o /tmp/vpx-conf-2868-809.o /tmp/vpx-
>
> conf-2868-24275.c
> arm-none-linux-gnueabi-gcc.exe: /tmp/vpx-conf-2868-24275.c: No such
> file or directory arm-none-linux-gnueabi-gcc.exe: no input files
> add_asflags -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp
> enabling realtime_only
> check_cflags -O3
> check_cc -O3
> BEGIN /tmp/vpx-conf-2868-24275.c
> 1 int x;
> END /tmp/vpx-conf-2868-24275.c
> /cygdrive/c/android-ndk-r8b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/windows/bin/arm-linux-androideabi-gcc
> --
>
> sysroot=/cygdrive/c/android-ndk-r8b/platforms/android-14/arch-arm -O3
> -c -o /tmp/vpx-conf-2868-809.o /tmp/vpx-conf-2868-24275.c
> arm-linux-androideabi-gcc.exe: /tmp/vpx-conf-2868-24275.c: No such
> file or directory arm-linux-androideabi-gcc.exe: no input
> files . . . . . . . . . . . . . . . .
> . . . . . . . .
> ------------------------------------------config.err log
> ---------------------------------------
>
>
>
>
>
>
> > Message: 1
> > Date: Tue, 7 Aug 2012 12:11:14 -0500
> > From: "Don Thorp (address@hidden)" <address@hidden>
> > To: address@hidden
> > Subject: Re: [Linphone-developers] Linphone-developers Digest, Vol
> > 114, Issue 5
> > Message-ID:
> > <address@hidden>
> > Content-Type: text/plain; charset=ISO-8859-1
> >
> > I had a similar issue until I put the pre-built toolchain in the
> > path. You might read through this google group on how to create the
> > standalone toolchains.
> > https://groups.google.com/forum/?fromgroups#!topic/android-ndk/6C55SW74_KA
> >
> > On Tue, Aug 7, 2012 at 5:01 AM, Lau KhimChuen
> > <address@hidden> wrote:
> > > Hi!
> > > Im sorry, I had missed some of the useful info in config.err :
> > >
> > > line 271: arm-none-linux-gnueabi-gcc: command not found
> > >
> > >
> > > Is it because of this gcc missing?
> > > I am getting it from CodeSourcery, hope it work.
> > >
> > >
> > > --------------------------------------------- config.err
> > > -----------------------------------------------------------------
> > > # ./configure --target=armv7-android-gcc
> > > --sdk-path=/cygdrive/c/android-ndk-r8b --enable-error-concealment
> > >
> > > Configuring selected codecs
> > > enabling vp8_encoder
> > > enabling vp8_decoder
> > > Configuring for target 'armv7-android-gcc'
> > > enabling armv7
> > > enabling armv6
> > > enabling armv5te
> > > enabling fast_unaligned
> > > add_asflags --defsym ARCHITECTURE=7
> > > check_cflags -march=armv7-a -mcpu=cortex-a8 -mfpu=neon
> > > -mfloat-abi=softfp check_cc -march=armv7-a -mcpu=cortex-a8
> > > -mfpu=neon -mfloat-abi=softfp BEGIN /tmp/vpx-conf-5704-20064.c
> > > 1 int x;
> > > END /tmp/vpx-conf-5704-20064.c
> > > arm-none-linux-gnueabi-gcc -march=armv7-a -mcpu=cortex-a8
> > > -mfpu=neon -mfloat-abi=softfp -c -o /tmp/vpx-conf-5704-12736.o
> > > /tmp/vpx-conf-5704-20064.c
> > > ./build/make/configure.sh: line 271: arm-none-linux-gnueabi-gcc:
> > > command not found
> > > add_asflags -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp
> > > enabling realtime_only
> > > check_cflags -O3
> > > check_cc -O3
> > > BEGIN /tmp/vpx-conf-5704-20064.c
> > > 1 int x;
> > > END /tmp/vpx-conf-5704-20064.c
> > > /cygdrive/c/android-ndk-r8b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/windows/bin/arm-linux-androideabi-gcc
> > > --sysroot=/cygdrive/c/android-ndk-r8b/platforms/android-14/arch-arm
> > > -O3 -c -o /tmp/vpx-conf-5704-12736.o /tmp/vpx-conf-5704-20064.c
> > > arm-linux-androideabi-gcc.exe: /tmp/vpx-conf-5704-20064.c: No
> > > such file or directory
> > > arm-linux-androideabi-gcc.exe: no input files
> > > check_cflags -fPIC
> > > check_cc -fPIC
> > > . . . .
> > > . . . .
> > > . . . .
> > > ------------------------------------end
> > > -------------------------------
> > >
> > >
> > >
> > > Thanks & regards,
> > > KC Lau.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >> From: address@hidden
> > >> Subject: Linphone-developers Digest, Vol 114, Issue 5
> > >> To: address@hidden
> > >> Date: Mon, 6 Aug 2012 12:00:36 -0400
> > >
> > >>
> > >> Send Linphone-developers mailing list submissions to
> > >> address@hidden
> > >>
> > >> To subscribe or unsubscribe via the World Wide Web, visit
> > >> https://lists.nongnu.org/mailman/listinfo/linphone-developers
> > >> or, via email, send a message with subject or body 'help' to
> > >> address@hidden
> > >>
> > >> You can reach the person managing the list at
> > >> address@hidden
> > >>
> > >> When replying, please edit your Subject line so it is more
> > >> specific than "Re: Contents of Linphone-developers digest..."
> > >>
> > >>
> > >> Today's Topics:
> > >>
> > >> 1. Linphone-android, Prepare_sources.sh at cygwin with the
> > >> message 'VP8 prepare stage failed.' (Lau KhimChuen)
> > >>
> > >>
> > >> ----------------------------------------------------------------------
> > >>
> > >> Message: 1
> > >> Date: Mon, 6 Aug 2012 09:14:43 +0000
> > >> From: Lau KhimChuen <address@hidden>
> > >> To: <address@hidden>
> > >> Subject: [Linphone-developers] Linphone-android,
> > >> Prepare_sources.sh at cygwin with the message 'VP8 prepare stage
> > >> failed.' Message-ID:
> > >> <address@hidden> Content-Type:
> > >> text/plain; charset="iso-8859-1"
> > >>
> > >>
> > >> Hi! I was trying to start my Linphone Android project, and
> > >> started configuration by executing the ./prepare_sources.sh
> > >> (from cygwin), it showed me the failed message as follow :
> > >>
> > >>
> > >> --------------- start --------------------------
> > >>
> > >> Configuring selected codecs
> > >> enabling vp8_encoder
> > >> enabling vp8_decoder
> > >> Configuring for target 'armv7-android-gcc'
> > >> enabling armv7
> > >> enabling armv6
> > >> enabling armv5te
> > >> enabling fast_unaligned
> > >> enabling realtime_only
> > >>
> > >> Unable to invoke compiler:
> > >> /cygdrive/c/android-ndk-r8b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/windows/bin/arm-linux-
> > >>
> > >> androideabi-gcc
> > >> --sysroot=/cygdrive/c/android-ndk-r8b/platforms/android-14/arch-arm
> > >>
> > >> Configuration failed. This could reflect a misconfiguration of
> > >> your toolchains, improper options selected, or another problem.
> > >> If you don't see any useful error messages above, the next step
> > >> is to look at the configure error log file (config.err) to
> > >> determine what configure was trying to do when it died.
> > >> VP8 prepare stage failed.
> > >>
> > >> --------------- end log -----------------------
> > >>
> > >>
> > >> My sources & versions :
> > >> linphone-android source => git clone
> > >> git://git.linphone.org/linphone-android.git --recursive
> > >> cygwin version ( CYGWIN_NT-5.1 lpcx037 1.7.16(0.262/5/3)
> > >> 2012-07-20 22:55 i686 Cygwin )
> > >> ndk-r8b
> > >> Window XP OS
> > >>
> > >>
> > >>
> > >> Had tried to search and updated the latest sdk, ndk and cygwin
> > >> also cannot resolve the issue.
> > >>
> > >> Any pointers would be greatly appreciated!
> > >>
> > >> Thanks and regards,
> > >> KC Lau.
> > >> -------------- next part --------------
> > >> An HTML attachment was scrubbed...
> > >> URL:
> > >> <http://lists.nongnu.org/archive/html/linphone-developers/attachments/20120806/16ccbeb7/attachment.html>
> > >>
> > >> ------------------------------
> > >>
>