Re: Re : [Linphone-developers] 101 Dialog establishment

[Simon Morlat]

Hi,

Configurable through linphonerc should be enough (not necessarily having
an accessor api for this parameter).

Thank you

Simon

Le mardi 17 août 2010 à 22:03 -0700, kl a écrit :
> 
> Would you also consider accepting this patch which turn off 101 status 
> permanently or you would rather it configurable from the GUI ?
> 
> ;)
> 
> --- On Wed, 8/18/10, kl <address@hidden> wrote:
> 
> > From: kl <address@hidden>
> > Subject: Re : [Linphone-developers] 101 Dialog establishment
> > To: address@hidden
> > Date: Wednesday, August 18, 2010, 5:15 AM
> > Any chance this will be addressed
> > into the linphone source ?
> > It's not the fault of linphone per se, but having it makes
> > linphone unable to talk to Linksys ATAs - whereas other
> > implementations such as asterisk, xlite and so on do not 
> > have this problem working with this model of ATA.
> > 
> > --- On Thu, 7/22/10, kl <address@hidden>
> > wrote:
> > 
> > > From: kl <address@hidden>
> > > Subject: Re: Re : [Linphone-developers] Fw: 101 Dialog
> > establishment
> > > To: address@hidden
> > > Date: Thursday, July 22, 2010, 3:20 PM
> > > 
> > > Thank you for your response. 
> > > 
> > > I have been hacking around after I post the message.
> > > I found that there is actually a way to pass an
> > > dont_send_101 option 
> > > to eXosip. To do this, I have modified a few files in
> > > coreapi. I 
> > > feel that ideally it should be a GUI selectable
> > option. But
> > > nevertheless,
> > > for now after hardcoding the option, calls can be made
> > by
> > > Linksys ATA to
> > > Linphone.
> > > 
> > > --- On Thu, 7/22/10, Aurelien Bouin <address@hidden>
> > > wrote:
> > > 
> > > > From: Aurelien Bouin <address@hidden>
> > > > Subject: Re : [Linphone-developers] Fw: 101
> > Dialog
> > > establishment
> > > > To: address@hidden,
> > > "kl" <address@hidden>
> > > > Date: Thursday, July 22, 2010, 3:07 PM
> > > > Hi,
> > > > You will have to find out in the code where the
> > 101
> > > SIP is
> > > > sent and change the code to feet your need, and
> > maybe
> > > > implement something like an option at the
> > compilation
> > > ...
> > > > because the 101 SIP message is in the standard
> > it
> > > cannot be
> > > > change for any reason ...
> > > > 
> > > > Aurelien BOUIN
> > > > 
> > > > --- En date de : Jeu 22.7.10, kl <address@hidden>
> > > > a écrit :
> > > > 
> > > > > De: kl <address@hidden>
> > > > > Objet: [Linphone-developers] Fw: 101 Dialog
> > > > establishment
> > > > > À: address@hidden
> > > > > Date: Jeudi 22 juillet 2010, 8h47
> > > > > 
> > > > > 
> > > > > --- On Thu, 7/22/10, kl <address@hidden>
> > > > > wrote:
> > > > > 
> > > > > > From: kl <address@hidden>
> > > > > > Subject: 101 Dialog establishment
> > > > > > To: address@hidden
> > > > > > Date: Thursday, July 22, 2010, 2:42 PM
> > > > > > 
> > > > > > I have been troubleshooting this
> > problem
> > > which I
> > > > have
> > > > > :-
> > > > > > 
> > > > > > 1. Linphone can call anyone.
> > > > > > 2. Asterisk and another SIP device can
> > call
> > > > Linphone.
> > > > > > 3. One Linksys ATA cannot call
> > Linphone.
> > > > > > 
> > > > > > After much troubleshooting, I found out
> > that
> > > it
> > > > is
> > > > > because
> > > > > > 
> > > > > > Linphone sends out a 101 Dialog
> > > establishment and
> > > > the
> > > > > 
> > > > > > Linksys ATA hangs up immediately upon
> > > receiving
> > > > this.
> > > > > > 
> > > > > > From what I read, it is Linksys ATA is
> > the
> > > one
> > > > which
> > > > > is not
> > > > > > 
> > > > > > following standard, however, if I would
> > like
> > > to
> > > > > accomodate
> > > > > > 
> > > > > > it if possible. It seems the code of
> > sending
> > > a
> > > > 101 is
> > > > > in 
> > > > > > eXosip. I tried compiling eXosip using
> > > > > '--enable-minisize',
> > > > > > 
> > > > > > but it does not even compile (3.3.0),
> > let
> > > alone
> > > > > allowing 
> > > > > > me to check if it is working with
> > Linphone.
> > > > > > 
> > > > > > Any suggestion ?
> > > > > > 
> > > > > > 
> > > > > >       
> > > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > > >
> > _______________________________________________
> > > > > Linphone-developers mailing list
> > > > > address@hidden
> > > > > http://lists.nongnu.org/mailman/listinfo/linphone-developers
> > > > > 
> > > > 
> > > > 
> > > > 
> > > > 
> > > 
> > > 
> > > 
> > > 
> > 
> > 
> > 
> > 
> > 
> > _______________________________________________
> > Linphone-developers mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/linphone-developers
> >
> 
> 
>       
> _______________________________________________ Linphone-developers mailing 
> list address@hidden 
> http://lists.nongnu.org/mailman/listinfo/linphone-developers