[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Linphone-developers] Error message when running linphonec on ARM, can't
|
From: |
zu1887 zu1887 |
|
Subject: |
[Linphone-developers] Error message when running linphonec on ARM, can't hear any voice. |
|
Date: |
Tue, 21 Jul 2009 11:05:30 +0800 |
Hi all,
I am working on porting linphone to an Samaung 2440-based ARM platform.
The software packages i used include:
speex 1.2beta3
Alsa-lib: 1.0.20
libosip2: 3.3.0
libeXosip2: 3.3.0
ncurses: 5.6
linphone: 3.1.2
libogg: 1.1.3
Kernel version is 2.6.29, and cross-compiler is 4.3.2 with EABI capability, and i am using readonly CRAMFS as root file system.
But i got following error message when running linphonec, and i can't hear any voice after a call gets through.
Some critical messages include:
ALSA lib conf.c:3952:(snd_config_expand) Unknown parameters 0
ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL default:0
ortp-warning-Could not attach mixer to card: Invalid argument.
ortp-message-Cannot open directory /usr/local/lib/mediastreamer/plugins: No such file or directory
ortp-message-ms_init() done
ortp-message-Cannot open directory /usr/local/lib/liblinphone/plugins: No such file or directory
rtp-warning-alsa_set_params: The period size 4096 is not supported by your hardware.
==> Using 4096 instead.
ortp-warning-alsa_set_params: periodsize:4096 Using 4096
ortp-warning-alsa_set_params: period:8 Using 8
ortp-message-incoming call ringing for 1 seconds
ortp-warning-alsa_set_params: The number of periods 8 is not supported by your hardware.
==> Using 8 instead.
ortp-warning-alsa_set_params: Error setting HW params:Invalid argument
ortp-warning-alsa_open_w: Error setting params (for 30027 micros)
I have used Aplay/arecord to test my sound HW(it's a UDA 1341 chip), and it works fine.
Could you pls give me some instructions? Many thanks!
-------------------------------------------------------------log---------------------------------------------------------------
# linphonec -d 6
INFO: no logfile, logging to stdout
ortp-message-oRTP-0.16.0 initialized.
ortp-message-Registering all filters...
ortp-message-Registering all soundcard handlers
ortp-message-Card ALSA: default device added
ALSA lib conf.c:3952:(snd_config_expand) Unknown parameters 0
ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL default:0
ortp-warning-Could not attach mixer to card: Invalid argument
ortp-message-Card ALSA: S3C24XX_UDA134X added
ortp-message-Loading plugins
ortp-message-Cannot open directory /usr/local/lib/mediastreamer/plugins: No such file or directory
ortp-message-ms_init() done
ortp-message-Cannot open directory /usr/local/lib/liblinphone/plugins: No such f ile or directory
ortp-message-Adding new codec PCMU/8000
ortp-message-Adding new codec PCMA/8000
ortp-message-Adding new codec speex/8000
ortp-message-Adding new codec speex/16000
ortp-message-getaddrinfo returned the following addresses:
ortp-message-0.0.0.0 port 5060
ortp-message-eXosip: Reseting timer to 10s before waking up!
Ready
Warning: video is disabled in linphonec, use -V or -C or -D to enable.
linphonec> ortp-message-Received message:
Via: SIP/2.0/UDP 192.168.1.10:5060;rport;branch=z9hG4bK14604
Call-ID: 32391
CSeq: 20 INVITE
Content-Type: application/sdp
Max-Forwards: 70
User-Agent: Linphone/3.1.2 (eXosip2/3.3.0)
Subject: Phone call
Content-Length: 313
v=0
o=toto 123456 654321 IN IP4 192.168.1.10
s=A conversation
c=IN IP4 192.168.1.10
t=0 0
m=audio 7078 RTP/AVP 111 110 0 3 8 101
a=rtpmap:111 speex/16000/1
a=rtpmap:110 speex/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpmap:3 GSM/8000/1
a=rtpmap:8 PCMA/8000/1
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-11
ortp-message-MESSAGE REC. CALLID:32391
ortp-message-This is a request
ortp-message-allocating transaction ressource 1 32391
ortp-message-allocating IST context
DEBUG: [get_output_if] connect: Network is unreachable
ortp-message-_eXosip_default_gateway_with_getifaddrs(): found 192.168.1.8
ortp-message-cb_rcvinvite (id=1)
ortp-message-getaddrinfo returned the following addresses:
ortp-message-192.168.1.10 port 5060
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 192.168.1.10:5060;rport=5060;branch=z9hG4bK14604
Call-ID: 32391
CSeq: 20 INVITE
User-Agent: Linphone/3.1.2 (eXosip2/unknown)
Content-Length: 0
ortp-message-cb_snd123456xx (id=1)
ortp-message-getaddrinfo returned the following addresses:
ortp-message-192.168.1.10 port 5060
SIP/2.0 101 Dialog Establishement
Via: SIP/2.0/UDP 192.168.1.10:5060;rport=5060;branch=z9hG4bK14604
Call-ID: 32391
CSeq: 20 INVITE
User-Agent: Linphone/3.1.2 (eXosip2/unknown)
Content-Length: 0
ortp-message-cb_snd123456xx (id=1)
ortp-message-eXosip: Reseting timer to 10s before waking up!
ortp-message-eXosip: Reseting timer to 10s before waking up!
ortp-message-CALL_NEW
DEBUG: [get_output_if] connect: Network is unreachable
ortp-message-_eXosip_default_gateway_with_getifaddrs(): found 192.168.1.8
DEBUG: [get_output_if] connect: Network is unreachable
ortp-message-_eXosip_default_gateway_with_getifaddrs(): found 192.168.1.8
ortp-message-Notifying all friends that we are in status 5
ortp-message-Partial MTU discovered : 1500
ortp-message-Partial MTU discovered : 1500
ortp-message-mtu to 192.168.1.3 is 1500
ortp-message-Discovered mtu is 1500, RTP payload max size is 1440
ortp-message-Using firewall address in sdp.
ortp-warning-payload GSM is not enabled.
ortp-message-Refusing audio codec 3 (GSM/8000/1)
linphonec> DEBUG: [get_output_if] connect: Network is unreachable
ortp-message-_eXosip_default_gateway_with_getifaddrs(): found 192.168.1.8
ortp-message-getaddrinfo returned the following addresses:
ortp-message-192.168.1.10 port 5060
SIP/2.0 180 Ringing
Via: SIP/2.0/UDP 192.168.1.10:5060;rport=5060;branch=z9hG4bK14604
Call-ID: 32391
CSeq: 20 INVITE
User-Agent: Linphone/3.1.2 (eXosip2/unknown)
Content-Length: 0
ortp-message-cb_snd123456xx (id=1)
ortp-message-eXosip: Reseting timer to 10s before waking up!
ortp-message-Starting local ring...
ortp-message-/usr/local/share/sounds/linphone/rings/oldphone.wav opened: rate=44100,channel=2
ortp-message-ms_filter_link: MSFilePlayer:0x6a968,0-->MSAlsaWrite:0x6dc28,0
ortp-message-incoming call ringing for 0 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-warning-alsa_set_params: The period size 40960 is not supported by your hardware.
==> Using 40960 instead.
ortp-warning-alsa_set_params: periodsize:40960 Using 40960
ortp-warning-alsa_set_params: period:8 Using 8
ortp-message-incoming call ringing for 1 seconds
ortp-warning-alsa_set_params: The number of periods 8 is not supported by your hardware.
==> Using 8 instead.
ortp-warning-alsa_set_params: Error setting HW params:Invalid argument
ortp-warning-alsa_open_w: Error setting params (for 30027 micros)
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-warning-alsa_set_params: The period size 40960 is not supported by your hardware.
==> Using 40960 instead.
ortp-warning-alsa_set_params: periodsize:40960 Using 40960
ortp-warning-alsa_set_params: period:8 Using 8
ortp-warning-alsa_set_params: The number of periods 8 is not supported by your hardware.
==> Using 8 instead.
ortp-warning-alsa_set_params: Error setting HW params:Invalid argument
ortp-warning-alsa_open_w: Error setting params (for 253995 micros)
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-warning-alsa_set_params: The period size 40960 is not supported by your hardware.
==> Using 40960 instead.
ortp-warning-alsa_set_params: periodsize:40960 Using 40960
ortp-warning-alsa_set_params: period:8 Using 8
ortp-warning-alsa_set_params: The number of periods 8 is not supported by your hardware.
==> Using 8 instead.
ortp-warning-alsa_set_params: Error setting HW params:Invalid argument
ortp-warning-alsa_open_w: Error setting params (for 481213 micros)
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-message-incoming call ringing for 1 seconds
ortp-warning-alsa_set_params: The period size 40960 is not supported by your hardware.
==> Using 40960 instead.
ortp-warning-alsa_set_params: periodsize:40960 Using 40960
ortp-warning-alsa_set_params: period:8 Using 8
ortp-warning-alsa_set_params: The number of periods 8 is not supported by your hardware.
==> Using 8 instead.
ortp-warning-alsa_set_params: Error setting HW params:Invalid argument
ortp-warning-alsa_open_w: Error setting params (for 704155 micros)
ortp-message-incoming call ringing for 2 seconds
ortp-message-incoming call ringing for 2 seconds
- [Linphone-developers] Error message when running linphonec on ARM, can't hear any voice.,
zu1887 zu1887 <=