linphone-developers
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Linphone-developers] oddities with Linphone's handling of USB camer


From: Simon Morlat
Subject: Re: [Linphone-developers] oddities with Linphone's handling of USB camera / microphone
Date: Fri, 17 Jul 2009 23:15:54 +0200
User-agent: KMail/1.11.4 (Linux/2.6.29-2-amd64; KDE/4.2.4; x86_64; ; )

Hi Jim,

It seems that the video stream you receive is seriously damaged.
Apparently the network mtu between the two phones is uncommon.
It is perhaps not detected correctly by the remote linphone, causing truncated 
packets or more likely packet losses.
A full log (until termination) would confirm this thanks to the statistics 
displayed at each end of call.
You can try to configure manually the mtu of the other phone (in configuration 
box, network tab) and retry.
From what I see it is unrelated with the fact of using the webcam's microphone 
or not.

Simon

Le vendredi 17 juillet 2009 19:31:27, Jim Diamond a écrit :
> On Wed, Jul 15, 2009 at 22:28 (+0200), Simon Morlat wrote:
> > Hi Jim,
> >
> > The video stops when the camera microphone is used. Looks like a driver
> > bug. Try to upgrade your linux kernel, if possible.
> > Send a log (linphone-3 --verbose),  maybe it will show us the name of the
> > internal error.
>
> Simon (et al),
>
> Today I have the error, even when I have no web cam (and hence no web
> cam mic) on my system.  Whether this is the same bug or not, I don't know.
>
> Looking at the file, I see a bunch of errors, but I don't immediately
> see if they are telling me I did something wrong, or whether there is
> some other problem.
>
> Are you able to determine that from looking at the error messages?
>
> Thanks.
>
>                               Jim
>
> Sorry to everyone on this list who doesn't for the excessively long
> message.
>
>
> (linphone-3:10462): libglade-WARNING **: Radio button group video_item
> could not be found
>
> (linphone-3:10462): Gtk-CRITICAL **: gtk_tree_row_reference_new: assertion
> `GTK_IS_TREE_MODEL (model)' failed
>
> (linphone-3:10462): Gtk-CRITICAL **: gtk_cell_view_set_displayed_row:
> assertion `GTK_IS_TREE_MODEL (cell_view->priv->model)' failed
>
> (linphone-3:10462): Gtk-CRITICAL **: gtk_tree_row_reference_new: assertion
> `GTK_IS_TREE_MODEL (model)' failed
>
> (linphone-3:10462): Gtk-CRITICAL **: gtk_cell_view_set_displayed_row:
> assertion `GTK_IS_TREE_MODEL (cell_view->priv->model)' failed
> linphone-message : Registering all filters...
> linphone-message : Registering all soundcard handlers
> linphone-message : Card ALSA: default device added
> linphone-message : Card ALSA: HDA Intel added
> linphone-message : Card ALSA: UM-1 added
> linphone-message : Card OSS: /dev/dsp added
> linphone-message : Card OSS: /dev/dsp added
> linphone-message : Registering all webcam handlers
> linphone-message : Webcam StaticImage: Static picture added
> linphone-message : Loading plugins
> linphone-message : Cannot open directory /usr/lib/mediastreamer/plugins: No
> such file or directory linphone-message : ms_init() done
> linphone-message : DNS resolution with 0.0.0.0:5060
> linphone-message : getaddrinfo returned the following addresses:
> linphone-message : 0.0.0.0 port 5060
> linphone-message : eXosip: Reseting timer to 10s before waking up!
> linphone-message : DNS resolution with ekiga.net:5060
> linphone-message : getaddrinfo returned the following addresses:
> linphone-message : 86.64.162.35 port 5060
> linphone-message : eXosip: here is the resolved destination
> host=86.64.162.35 linphone-message : allocating transaction ressource 1
> 1003998809
> linphone-message : allocating NICT context
> linphone-message : linphone_friend_apply() done.
> linphone-message : DNS resolution with ekiga.net:5060
> linphone-message : getaddrinfo returned the following addresses:
> linphone-message : 86.64.162.35 port 5060
> linphone-message : Message sent: (to dest=86.64.162.35:5060)
> SUBSCRIBE sip:address@hidden SIP/2.0
> Via: SIP/2.0/UDP 192.168.1.3:5060;rport;branch=z9hG4bK1506038575
> From: Jim Diamond <sip:address@hidden>;tag=485547211
> To: dragos (ekiga addr) <sip:address@hidden>
> Call-ID: 1003998809
> CSeq: 20 SUBSCRIBE
> Contact: <sip:address@hidden:5060>
> Max-Forwards: 70
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> Expires: 600
> Event: presence
> Content-Length: 0
>
>
> linphone-message : cb_sndsubscibe (id=1)
> linphone-message : eXosip: timer sec:0 usec:100000!
> linphone-message : DNS resolution with 131.162.131.135:5060
> linphone-message : getaddrinfo returned the following addresses:
> linphone-message : 131.162.131.135 port 5060
> linphone-message : eXosip: here is the resolved destination
> host=131.162.131.135 linphone-message : allocating transaction ressource 2
> 238975229
> linphone-message : allocating NICT context
> linphone-message : linphone_friend_apply() done.
> linphone-message : DNS resolution with 131.162.131.135:5060
> linphone-message : getaddrinfo returned the following addresses:
> linphone-message : 131.162.131.135 port 5060
> linphone-message : Message sent: (to dest=131.162.131.135:5060)
> SUBSCRIBE sip:address@hidden SIP/2.0
> Via: SIP/2.0/UDP 192.168.1.3:5060;rport;branch=z9hG4bK773924635
> From: Jim Diamond <sip:address@hidden>;tag=2010006610
> To: my office <sip:address@hidden>
> Call-ID: 238975229
> CSeq: 20 SUBSCRIBE
> Contact: <sip:address@hidden:5060>
> Max-Forwards: 70
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> Expires: 600
> Event: presence
> Content-Length: 0
>
>
> linphone-message : cb_sndsubscibe (id=2)
> linphone-message : eXosip: timer sec:0 usec:100000!
> linphone-message : Received message:
> SIP/2.0 101 Dialog Establishement
> Via: SIP/2.0/UDP
> 192.168.1.3:5060;rport=5060;branch=z9hG4bK773924635;received=131.162.64.98
> From: Jim Diamond <sip:address@hidden>;tag=2010006610
> To: my office <sip:address@hidden>;tag=1852747759
> Call-ID: 238975229
> CSeq: 20 SUBSCRIBE
> Contact: <sip:address@hidden:5060>
> Event: presence
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> Content-Length: 0
>
>
> linphone-message : Message received from: 131.162.131.135:5060
> linphone-message : Message received from: 131.162.131.135:5060
> linphone-message : MESSAGE REC. CALLID:238975229
> linphone-message : Message received from: 131.162.131.135:5060
> linphone-message : cb_rcv1xx (id=2)
> linphone-message : eXosip: timer sec:0 usec:100000!
> linphone-message : Received message:
> SIP/2.0 401 Unauthorized
> Via: SIP/2.0/UDP
> 192.168.1.3:5060;rport=5060;branch=z9hG4bK773924635;received=131.162.64.98
> From: Jim Diamond <sip:address@hidden>;tag=2010006610
> To: my office <sip:address@hidden>;tag=1852747759
> Call-ID: 238975229
> CSeq: 20 SUBSCRIBE
> Event: presence
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> Content-Length: 0
>
>
> linphone-message : Message received from: 131.162.131.135:5060
> linphone-message : Message received from: 131.162.131.135:5060
> linphone-message : MESSAGE REC. CALLID:238975229
> linphone-message : Message received from: 131.162.131.135:5060
> linphone-message : cb_rcv4xx (id=2)
> linphone-message : eXosip: timer sec:0 usec:100000!
> linphone-message : Unhandled exosip event !
> linphone-message : Unhandled exosip event !
> linphone-message : ms_filter_link:
> MSStaticImage:0x9768b58,0-->MSPixConv:0x976a828,0 linphone-message :
> ms_filter_link: MSPixConv:0x976a828,0-->MSVideoOut:0x9768b98,0
> linphone-message : Received message:
> SIP/2.0 202 OK
> Via: SIP/2.0/UDP 142.177.244.42:5060;rport=5060;branch=z9hG4bK1506038575
> From: Jim Diamond <sip:address@hidden>;tag=485547211
> To: dragos (ekiga addr)
> <sip:address@hidden>;tag=10.16989.1247851349.3027 Call-ID:
> 1003998809
> CSeq: 20 SUBSCRIBE
> Expires: 600
> Contact: <sip:86.64.162.35:5060>
> Server: Kamailio (1.4.0-notls (i386/linux))
> Content-Length: 0
>
>
> linphone-message : Message received from: 86.64.162.35:5060
> linphone-message : Message received from: 86.64.162.35:5060
> linphone-message : MESSAGE REC. CALLID:1003998809
> linphone-message : Message received from: 86.64.162.35:5060
> linphone-message : cb_rcv2xx (id=1)
> linphone-message : eXosip: timer sec:5 usec:10000!
> linphone-message : Received message:
> NOTIFY sip:address@hidden:5060 SIP/2.0
> Via: SIP/2.0/UDP 86.64.162.35;branch=z9hG4bK80dd.eefbe5c6.0
> To: sip:address@hidden;tag=485547211
> From: sip:address@hidden;tag=10.16989.1247851349.3027
> CSeq: 1 NOTIFY
> Call-ID: 1003998809
> Content-Length: 0
> User-Agent: Kamailio (1.4.0-notls (i386/linux))
> Max-Forwards: 70
> Event: presence
> Contact: <sip:86.64.162.35:5060>
> Subscription-State: active;expires=600
>
>
> linphone-message : Message received from: 86.64.162.35:5060
> linphone-message : Message received from: 86.64.162.35:5060
> linphone-message : MESSAGE REC. CALLID:1003998809
> linphone-message : Message received from: 86.64.162.35:5060
> linphone-message : This is a request
> linphone-message : allocating transaction ressource 3 1003998809
> linphone-message : allocating NIST context
> linphone-message : cb_rcvunkrequest (id=3)
> linphone-message : DNS resolution with 86.64.162.35:5060
> linphone-message : getaddrinfo returned the following addresses:
> linphone-message : 86.64.162.35 port 5060
> linphone-message : Message sent: (to dest=86.64.162.35:5060)
> SIP/2.0 200 OK
> Via: SIP/2.0/UDP 86.64.162.35;branch=z9hG4bK80dd.eefbe5c6.0
> From: <sip:address@hidden>;tag=10.16989.1247851349.3027
> To: <sip:address@hidden>;tag=485547211
> Call-ID: 1003998809
> CSeq: 1 NOTIFY
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> Content-Length: 0
>
>
> linphone-message : cb_snd123456xx (id=3)
> linphone-message : eXosip: timer sec:5 usec:10000!
> linphone-message : eXosip: timer sec:5 usec:10000!
> linphone-message : Using yuv overlay.
> linphone-message : YUV overlay using hardware acceleration.
> linphone-message : EXOSIP_SUBSCRIPTION_ANSWERED, ev->sid=1
>
> linphone-message : CALL_SUBSCRIPTION_NOTIFY
> linphone-message : Receiving notify with sid=1,nid=0
> linphone-error : No body in NOTIFY
> linphone-message : DNS resolution with 131.162.131.135:5060
> linphone-message : getaddrinfo returned the following addresses:
> linphone-message : 131.162.131.135 port 5060
> linphone-message : eXosip: here is the resolved destination
> host=131.162.131.135 linphone-message : Notifying all friends that we are
> in status 5
> linphone-message : Partial MTU discovered : 1356
> linphone-message : Partial MTU discovered : 1356
> linphone-message : mtu to 131.162.131.135 is 1356
> linphone-message : Discovered mtu is 1356, RTP payload max size is 1296
> linphone-message : allocating transaction ressource 4 366740351
> linphone-message : allocating ICT context
> linphone-message : cb_nict_kill_transaction (id=2)
> linphone-message : DNS resolution with 131.162.131.135:5060
> linphone-message : getaddrinfo returned the following addresses:
> linphone-message : 131.162.131.135 port 5060
> linphone-message : Message sent: (to dest=131.162.131.135:5060)
> INVITE sip:address@hidden SIP/2.0
> Via: SIP/2.0/UDP 192.168.1.3:5060;rport;branch=z9hG4bK1219784887
> From: Jim Diamond <sip:address@hidden>;tag=336439774
> To: my office <sip:address@hidden>
> Call-ID: 366740351
> CSeq: 20 INVITE
> Contact: <sip:address@hidden:5060>
> Content-Type: application/sdp
> Max-Forwards: 70
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> Subject: Phone call
> Expires: 120
> Content-Length:   518
>
> v=0
> o=zsd 123456 654321 IN IP4 142.177.247.116
> s=A conversation
> c=IN IP4 142.177.247.116
> t=0 0
> m=audio 7078 RTP/AVP 111 110 0 8 101
> a=rtpmap:111 speex/16000/1
> a=rtpmap:110 speex/8000/1
> a=rtpmap:0 PCMU/8000/1
> a=rtpmap:8 PCMA/8000/1
> a=rtpmap:101 telephone-event/8000
> a=fmtp:101 0-11
> m=video 9078 RTP/AVP 99 34 97 98 100
> a=rtpmap:99 MP4V-ES/90000
> a=fmtp:99 profile-level-id=3
> a=rtpmap:34 H263/90000
> a=rtpmap:97 theora/90000
> a=rtpmap:98 H263-1998/90000
> a=fmtp:98 CIF=1;QCIF=1
> a=rtpmap:100 x-snow/90000
>
> linphone-message : cb_sndinvite (id=4)
> linphone-message : eXosip: timer sec:0 usec:100000!
> linphone-message : Received message:
> SIP/2.0 100 Trying
> Via: SIP/2.0/UDP
> 192.168.1.3:5060;rport=5060;branch=z9hG4bK1219784887;received=131.162.64.98
> From: Jim Diamond <sip:address@hidden>;tag=336439774
> To: my office <sip:address@hidden>
> Call-ID: 366740351
> CSeq: 20 INVITE
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> Content-Length: 0
>
>
> linphone-message : Message received from: 131.162.131.135:5060
> linphone-message : Message received from: 131.162.131.135:5060
> linphone-message : MESSAGE REC. CALLID:366740351
> linphone-message : Message received from: 131.162.131.135:5060
> linphone-message : cb_nict_kill_transaction (id=1)
> linphone-message : cb_rcv1xx (id=4)
> linphone-message : eXosip: Reseting timer to 10s before waking up!
> linphone-message : Received message:
> SIP/2.0 101 Dialog Establishement
> Via: SIP/2.0/UDP
> 192.168.1.3:5060;rport=5060;branch=z9hG4bK1219784887;received=131.162.64.98
> From: Jim Diamond <sip:address@hidden>;tag=336439774
> To: my office <sip:address@hidden>;tag=128049630
> Call-ID: 366740351
> CSeq: 20 INVITE
> Contact: <sip:address@hidden:5060>
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> Content-Length: 0
>
>
> linphone-message : Message received from: 131.162.131.135:5060
> linphone-message : Message received from: 131.162.131.135:5060
> linphone-message : MESSAGE REC. CALLID:366740351
> linphone-message : Message received from: 131.162.131.135:5060
> linphone-message : cb_rcv1xx (id=4)
> linphone-message : eXosip: Reseting timer to 10s before waking up!
> linphone-message : CALL_PROCEEDING
> linphone-message : CALL_PROCEEDING
> linphone-message : Received message:
> SIP/2.0 180 Ringing
> Via: SIP/2.0/UDP
> 192.168.1.3:5060;rport=5060;branch=z9hG4bK1219784887;received=131.162.64.98
> From: Jim Diamond <sip:address@hidden>;tag=336439774
> To: my office <sip:address@hidden>;tag=128049630
> Call-ID: 366740351
> CSeq: 20 INVITE
> Contact: <sip:address@hidden:5060>
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> Content-Length: 0
>
>
> linphone-message : Message received from: 131.162.131.135:5060
> linphone-message : Message received from: 131.162.131.135:5060
> linphone-message : MESSAGE REC. CALLID:366740351
> linphone-message : Message received from: 131.162.131.135:5060
> linphone-message : cb_rcv1xx (id=4)
> linphone-message : eXosip: Reseting timer to 10s before waking up!
> linphone-message : CALL_RINGING
> linphone-message : Remote ringing...
> linphone-message : /usr/share/sounds/linphone/ringback.wav opened:
> rate=8000,channel=1 linphone-message : ms_filter_link:
> MSFilePlayer:0x9817bb8,0-->MSAlsaWrite:0x9817c60,0 linphone-warning :
> alsa_set_params: The period size 256 is not supported by your hardware. ==>
> Using 170 instead.
> linphone-warning : alsa_set_params: periodsize:256 Using 170
> linphone-warning : alsa_set_params: period:8 Using 8
> linphone-message : Received message:
> SIP/2.0 200 OK
> Via: SIP/2.0/UDP
> 192.168.1.3:5060;rport=5060;branch=z9hG4bK1219784887;received=131.162.64.98
> From: Jim Diamond <sip:address@hidden>;tag=336439774
> To: my office <sip:address@hidden>;tag=128049630
> Call-ID: 366740351
> CSeq: 20 INVITE
> Contact: <sip:address@hidden:5060>
> Content-Type: application/sdp
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> Content-Length:   501
>
> v=0
> o=zsd 123456 654321 IN IP4 131.162.131.135
> s=A conversation
> c=IN IP4 131.162.131.135
> t=0 0
> m=audio 7078 RTP/AVP 111 110 0 8 101
> a=rtpmap:111 speex/16000/1
> a=rtpmap:110 speex/8000/1
> a=rtpmap:0 PCMU/8000/1
> a=rtpmap:8 PCMA/8000/1
> a=rtpmap:101 telephone-event/8000
> m=video 9078 RTP/AVP 99 34 97 98 100
> a=rtpmap:99 MP4V-ES/90000
> a=fmtp:99 profile-level-id=3
> a=rtpmap:34 H263/90000
> a=rtpmap:97 theora/90000
> a=rtpmap:98 H263-1998/90000
> a=fmtp:98 CIF=1;QCIF=1
> a=rtpmap:100 x-snow/90000
>
> linphone-message : Message received from: 131.162.131.135:5060
> linphone-message : Message received from: 131.162.131.135:5060
> linphone-message : MESSAGE REC. CALLID:366740351
> linphone-message : Message received from: 131.162.131.135:5060
> linphone-message : cb_rcv2xx (id=4)
> linphone-message : cb_nict_kill_transaction (id=4)
> linphone-message : eXosip: Reseting timer to 10s before waking up!
> linphone-message : CALL_ANSWERED
>
> linphone-message : ms_filter_unlink:
> MSFilePlayer:0x9817bb8,0-->MSAlsaWrite:0x9817c60,0 linphone-message :
> MSTicker thread exiting
> linphone-message : ms_filter_link:
> MSAlsaRead:0x980f258,0-->MSSpeexEnc:0x9816380,0 linphone-message :
> ms_filter_link: MSDtmfGen:0x9808a58,0-->MSAlsaWrite:0x980a6c0,0
> linphone-message : ms_filter_link:
> MSSpeexEnc:0x9816380,0-->MSRtpSend:0x9811df8,0 linphone-message :
> ms_filter_link: MSRtpRecv:0x9817c60,0-->MSSpeexDec:0x9816440,0
> linphone-message : ms_filter_link:
> MSSpeexDec:0x9816440,0-->MSDtmfGen:0x9808a58,0 linphone-message : Using
> bitrate 27800 for speex encoder.
> linphone-message : ms_filter_unlink:
> MSStaticImage:0x9768b58,0-->MSPixConv:0x976a828,0 linphone-message :
> ms_filter_unlink: MSPixConv:0x976a828,0-->MSVideoOut:0x9768b98,0
> linphone-message : MSTicker thread exiting
> linphone-message : Using permissive algorithm
> linphone-message : Setting vsize=352x288, fps=15.000000
> linphone-message : ms_filter_link:
> MSStaticImage:0x97f4f18,0-->MSPixConv:0x9768ba8,0 linphone-message :
> ms_filter_link: MSPixConv:0x9768ba8,0-->MSSizeConv:0x976a828,0
> linphone-message : ms_filter_link:
> MSSizeConv:0x976a828,0-->MSTee:0x9811a90,0 linphone-message :
> ms_filter_link: MSTee:0x9811a90,0-->MSMpeg4Enc:0x97e2a18,0 linphone-message
> : ms_filter_link: MSMpeg4Enc:0x97e2a18,0-->MSRtpSend:0x9812940,0
> linphone-message : ms_filter_link:
> MSRtpRecv:0x976a928,0-->MSMpeg4Dec:0x98119e0,0 linphone-message :
> ms_filter_link: MSMpeg4Dec:0x98119e0,0-->MSVideoOut:0x9768b58,0
> linphone-message : ms_filter_link:
> MSTee:0x9811a90,1-->MSVideoOut:0x9768b58,1 linphone-message : Codec bitrate
> set to 349999
> linphone-message : qmin=2 qmax=31
> linphone-message : alsa_open_r: opening default at 16000Hz, bits=16,
> stereo=0 linphone-message : Using yuv overlay.
> linphone-message : YUV overlay using hardware acceleration.
> linphone-warning : alsa_set_params: The period size 512 is not supported by
> your hardware. ==> Using 341 instead.
> linphone-warning : alsa_set_params: periodsize:512 Using 341
> linphone-warning : alsa_set_params: period:8 Using 8
> linphone-message : DNS resolution with 131.162.131.135:5060
> linphone-message : getaddrinfo returned the following addresses:
> linphone-message : 131.162.131.135 port 5060
> linphone-message : eXosip: here is the resolved destination
> host=131.162.131.135 linphone-message : DNS resolution with
> 131.162.131.135:5060
> linphone-message : getaddrinfo returned the following addresses:
> linphone-message : 131.162.131.135 port 5060
> linphone-message : Message sent: (to dest=131.162.131.135:5060)
> ACK sip:address@hidden:5060 SIP/2.0
> Via: SIP/2.0/UDP 192.168.1.3:5060;rport;branch=z9hG4bK1871897965
> From: Jim Diamond <sip:address@hidden>;tag=336439774
> To: my office <s[mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]looks like this file was encoded with
> (divx4/(old)xvid/opendivx) -> forcing low_delay flag [mpeg4 @
> 0x97fff68]picture size invalid (0x0)
> [mpeg4 @ 0x97fff68]get_buffer() failed (-1 0 0 (nil))
> [mpeg4 @ 0x97fff68]picture size invalid (0x0)
> [mpeg4 @ 0x97fff68]get_buffer() failed (-1 0 0 (nil))
> [mpeg4 @ 0x97fff68]picture size invalid (0x0)
> [mpeg4 @ 0x97fff68]get_buffer() failed (-1 0 0 (nil))
> [mpeg4 @ 0x97fff68]picture size invalid (0x0)
> [mpeg4 @ 0x97fff68]get_buffer() failed (-1 0 0 (nil))
> [mpeg4 @ 0x97fff68]picture size invalid (0x0)
> [mpeg4 @ 0x97fff68]get_buffer() failed (-1 0 0 (nil))
> [mpeg4 @ 0x97fff68]picture size invalid (0x0)
> [mpeg4 @ 0x97fff68]get_buffer() failed (-1 0 0 (nil))
> [mpeg4 @ 0x97fff68]picture size invalid (0x0)
> [mpeg4 @ 0x97fff68]get_buffer() failed (-1 0 0 (nil))
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> ip:address@hidden>;tag=128049630
> Call-ID: 366740351
> CSeq: 20 ACK
> Contact: <sip:address@hidden:5060>
> Max-Forwards: 70
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> Content-Length: 0
>
>
> linphone-message : No authentication info in the request, ignoring
> linphone-message : bandwidth usage: audio=[d=0.0,u=0.0] video=[d=0.0,u=0.0]
> kbit/sec linphone-message : Emitting I-frame
> linphone-message : synchronizing timestamp, diff=960
> linphone-message : bandwidth usage: audio=[d=24.1,u=36.8]
> video=[d=0.0,u=246.0] kbit/sec linphone-warning : alsa_set_params: The
> period size 512 is not supported by your hardware. ==> Using 341 instead.
> linphone-warning : alsa_set_params: periodsize:512 Using 341
> linphone-warning : alsa_set_params: period:8 Using 8
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-message : bandwidth usage: audio=[d=31.4,u=29.3]
> video=[d=37.0,u=10.5] kbit/sec linphone-warning : ms_AVdecoder_process:
> error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-message : bandwidth usage: audio=[d=31.2,u=37.7]
> video=[d=121.6,u=9.8] kbit/sec linphone-warning : ms_AVdecoder_process:
> error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-message : bandwidth usage: audio=[d=42.9,u=31.4]
> video=[d=131.7,u=32.1] kbit/sec linphone-warning : ms_AVdecoder_process:
> error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-message : bandwidth usage: audio=[d=32.2,u=29.1]
> video=[d=127.5,u=136.7] kbit/sec linphone-warning : ms_AVdecoder_process:
> error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning[mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
> [mpeg4 @ 0x97fff68]header damaged
>
>  : ms_AVdecoder_process: error -1.
>
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-message : video_steam_process_rtcp: receiving RTCP SR
> linphone-message : interarrival jitter=1328 , lost packets percentage since
> last report=0.000000 linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-message : bandwidth usage: audio=[d=31.7,u=31.9]
> video=[d=94.2,u=23.5] kbit/sec linphone-warning : ms_AVdecoder_process:
> error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-message : bandwidth usage: audio=[d=38.1,u=31.6]
> video=[d=124.6,u=14.4] kbit/sec linphone-warning : ms_AVdecoder_process:
> error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-message : bandwidth usage: audio=[d=33.7,u=32.1]
> video=[d=106.7,u=8.6] kbit/sec linphone-warning : ms_AVdecoder_process:
> error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-warning : ms_AVdecoder_process: error -1.
> linphone-message : DNS resolution with 86.64.162.35:5060
> linphone-message : getaddrinfo returned the following addresses:
> linphone-message : 86.64.162.35 port 5060
> linphone-message : eXosip: here is the resolved destination
> host=86.64.162.35 linphone-message : allocating transaction ressource 5
> 1003998809
> linphone-message : allocating NICT context
> linphone-message : DNS resolution with 86.64.162.35:5060
> linphone-message : getaddrinfo returned the following addresses:
> linphone-message : 86.64.162.35 port 5060
> linphone-message : Message sent: (to dest=86.64.162.35:5060)
> SUBSCRIBE sip:86.64.162.35:5060 SIP/2.0
> Via: SIP/2.0/UDP 192.168.1.3:5060;rport;branch=z9hG4bK1077465869
> From: Jim Diamond <sip:address@hidden>;tag=485547211
> To: dragos (ekiga addr)
> <sip:address@hidden>;tag=10.16989.1247851349.3027 Call-ID:
> 1003998809
> CSeq: 21 SUBSCRIBE
> Contact: <sip:address@hidden:5060>
> Max-Forwards: 70
> User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> Expires: 0
> Content-Length: 0
>
>
> linphone-message : cb_sndsubscibe (id=5)
> linphone-warning : keep alive: 1
> linphone-message : eXosip: timer sec:0 usec:100000!
> linphone-message : Release a terminated transaction
> linphone-message : free transaction ressource 1 1003998809
> linphone-message : free nict ressource
> linphone-message : free transaction ressource 5 1003998809
> linphone-message : free nict ressource
> linphone-message : free transaction ressource 3 1003998809
> linphone-message : free nist ressource
> linphone-message : Release a terminated transaction
> linphone-message : free transaction ressource 2 238975229
> linphone-message : free nict ressource
> linphone-message : Release a terminated transaction
> linphone-message : free transaction ressource 4 366740351
> linphone-message : free ict ressource






reply via email to

[Prev in Thread] Current Thread [Next in Thread]