linphone-developers
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Linphone-developers] Not beeing able to send video (linphone 3.0.0)


From: Conrad Beckert
Subject: Re: [Linphone-developers] Not beeing able to send video (linphone 3.0.0)
Date: Wed, 21 Jan 2009 00:55:41 +0100

Hi Simon,

thanks for the swift reply.

I tried to build ffmpeg too and to build linphone using this. No avail. I 
checked out the recent ffmpeg sources and tried almost all imaginable configure 
parameters. So I had to give up here :-(

But with your tip I managed to get a working linphone anyway: the unstripped 
versions of libavcodec, libavformat etc. do the job. 

They do conflict with the necessary dev packages needed for compiling. So I 
compiled with the stripped (naked :-)  ) ones and replaced them later.

It works! :-) That's really cool - a simple portable, no nonsense video phone 
which goes where I go. No big deal, no heavy libraries for evolution or ldap - 
just punch in a number and talk. Cool.



What a pity that there are no Ubuntu binary packages of linphone-3 yet - even 
in jaunty, due in april. The eee needs the version 3 because of its camera.

Perhaps someone is willing to start a launchpad project - or whatever it takes 
to get linphone-3 into the official build.  I have no idea, what one have to do 
to get it in? I would like to help to promote linphone.  

There are quite a few Ubuntu users out there :-)

Greetings
Conrad
 


-------- Original-Nachricht --------
> Datum: Fri, 16 Jan 2009 21:26:24 +0100
> Von: Simon Morlat <address@hidden>
> An: address@hidden
> CC: "Conrad Beckert" <address@hidden>
> Betreff: Re: [Linphone-developers] Not beeing able to send video (linphone 
> 3.0.0)

> Hi Conrad,
> 
> >
> > The verbose log shows the following interesting error message:
> >
> > linphone-error : could not find encoder for codec id 5
> 
> This is the problem, and the problem is in libavcodec (ffmpeg). In debian
> they 
> have disabled video encoders (but kept decoders of course) because of
> patents 
> issues. They probably did the same in ubuntu.
> You 'll have to rebuild a ffmpeg and install it in /usr/local for example,
> then rebuild linphone on top of it. I suggest that you first remove 
> libavcodec-dev, libswscale-dev, libavutil-dev, libavformat-dev before
> doing 
> that.
> There is no way to detect that situation at compile time. But linphone
> should 
> probably hide the misworking codec in the configuration box. In that case
> you 
> would have at least theora or snow to be used. But as those codec aren't
> very 
> interroperable with the rest of the world, and not very performant/stable.
> The open source world is lacking a fully functionnal/stable/performant
> free 
> video codec such as speex is in the audio domain.
> 
> Simon
> 
> 
> >
> >
> > That's for h263-1998 (different ids for different codecs - it`s not the
> > h263 only) Attached see a full log of a LAN call.
> >
> > Details:
> > - linphone stable 3.0.0 (had to configure with --disable-strict)
> > - all libraries from ubuntu 8.04
> >
> > Thank you so much for your help. It would be nice to get the eee to
> work.
> >
> > Conrad
> >
> > linphone-message : Registering all filters...
> > linphone-message : Registering all soundcard handlers
> > linphone-message : Card ALSA: default device added
> > linphone-message : Card ALSA: HDA Intel added
> > linphone-message : Card OSS: /dev/dsp added
> > linphone-message : Card OSS: /dev/dsp added
> > linphone-message : Registering all webcam handlers
> > linphone-message : Webcam V4L2: /dev/video0 added
> > linphone-message : Webcam V4L: /dev/video0 added
> > linphone-message : Webcam StaticImage: Static picture added
> > linphone-message : Loading plugins
> > linphone-message : Cannot open directory
> > /usr/local/lib/mediastreamer/plugins: No such file or directory
> > linphone-message : ms_init() done
> > linphone-message : DNS resolution with 0.0.0.0:5060
> > linphone-message : getaddrinfo returned the following addresses:
> > linphone-message : 0.0.0.0 port 5060
> > linphone-message : eXosip: Reseting timer to 15s before waking up!
> > linphone-message : v4lv2: V4L2_PIX_FMT_YUYV choosen
> > linphone-message : Size of picture is 352x288
> > linphone-message : ms_filter_link:
> > MSV4L2Capture:0xa03faa8,0-->MSPixConv:0xa03fc78,0 linphone-message :
> > ms_filter_link: MSPixConv:0xa03fc78,0-->MSVideoOut:0xa03fbb0,0
> > linphone-message : Using yuv overlay.
> > linphone-message : YUV overlay using hardware acceleration.
> > linphone-message : v4lv2: V4L2_PIX_FMT_YUYV choosen
> > linphone-message : Size of picture is 352x288
> > linphone-message : V4L2 video capture started.
> > linphone-message : Received message:
> > BYE sip:address@hidden:5060 SIP/2.0
> >
> > Via: SIP/2.0/UDP 192.168.2.15:5060;rport;branch=z9hG4bK2776
> >
> > From: Conrad Beckert <sip:address@hidden>;tag=24464
> >
> > To: Conrad <sip:address@hidden>;tag=1262173420
> >
> > Call-ID: 816241320
> >
> > CSeq: 21 BYE
> >
> > Contact: <sip:address@hidden:5060>
> >
> > Max-Forwards: 70
> >
> > User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> >
> > Content-Length: 0
> >
> >
> >
> >
> > linphone-message : Message received from: 192.168.2.15:5060
> > linphone-message : Message received from: 192.168.2.15:5060
> > linphone-message : MESSAGE REC. CALLID:816241320
> > linphone-message : Message received from: 192.168.2.15:5060
> > linphone-message : This is a request
> > linphone-message : allocating transaction ressource 1 816241320
> > linphone-message : allocating NIST context
> > linphone-message : cb_rcvunkrequest (id=1)
> > linphone-message : DNS resolution with 192.168.2.15:5060
> > linphone-message : getaddrinfo returned the following addresses:
> > linphone-message : 192.168.2.15 port 5060
> > linphone-message : Message sent: (to dest=192.168.2.15:5060)
> > SIP/2.0 481 Call Leg/Transaction Does Not Exist
> >
> > Via: SIP/2.0/UDP 192.168.2.15:5060;rport=5060;branch=z9hG4bK2776
> >
> > From: Conrad Beckert <sip:address@hidden>;tag=24464
> >
> > To: Conrad <sip:address@hidden>;tag=1262173420
> >
> > Call-ID: 816241320
> >
> > CSeq: 21 BYE
> >
> > User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> >
> > Content-Length: 0
> >
> >
> >
> >
> > linphone-message : cb_snd123456xx (id=1)
> > linphone-message : eXosip: Reseting timer to 15s before waking up!
> > linphone-message : eXosip: Reseting timer to 15s before waking up!
> > linphone-message : in linphone_other_request
> > linphone-message : Unsupported request received.
> > linphone-error : eXosip: transaction already answered
> > linphone-warning : We are late of 475 miliseconds.
> > linphone-warning : We are late of 288 miliseconds.
> > linphone-warning : We are late of 289 miliseconds.
> > linphone-warning : We are late of 290 miliseconds.
> > linphone-warning : We are late of 304 miliseconds.
> > linphone-warning : We are late of 52 miliseconds.
> > linphone-warning : We are late of 58 miliseconds.
> > linphone-warning : We are late of 78 miliseconds.
> > linphone-warning : We are late of 102 miliseconds.
> > linphone-message : eXosip: Reseting timer to 15s before waking up!
> > linphone-message : Notifying all friends that we are in status 5
> > linphone-message : Partial MTU discovered : 1492
> > linphone-message : Partial MTU discovered : 1492
> > linphone-message : mtu to 192.168.2.15 is 1492
> > linphone-message : Discovered mtu is 1492, RTP payload max size is 1432
> > linphone-message : allocating transaction ressource 2 2084376213
> > linphone-message : allocating ICT context
> > linphone-message : DNS resolution with 192.168.2.15:5060
> > linphone-message : getaddrinfo returned the following addresses:
> > linphone-message : 192.168.2.15 port 5060
> > linphone-message : Message sent: (to dest=192.168.2.15:5060)
> > INVITE sip:address@hidden SIP/2.0
> >
> > Via: SIP/2.0/UDP 192.168.2.16:5060;rport;branch=z9hG4bK208675205
> >
> > From: Conrad <sip:address@hidden>;tag=508960452
> >
> > To: Conrad Beckert <sip:address@hidden>
> >
> > Call-ID: 2084376213
> >
> > CSeq: 20 INVITE
> >
> > Contact: <sip:address@hidden:5060>
> >
> > Content-Type: application/sdp
> >
> > Max-Forwards: 70
> >
> > User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> >
> > Subject: Phone call
> >
> > Expires: 120
> >
> > Content-Length:   467
> >
> >
> >
> > v=0
> >
> > o=2003 123456 654321 IN IP4 192.168.2.16
> >
> > s=A conversation
> >
> > c=IN IP4 192.168.2.16
> >
> > t=0 0
> >
> > m=audio 7010 RTP/AVP 3 0 8 101
> >
> > b=AS:80
> >
> > a=rtpmap:3 GSM/8000/1
> >
> > a=rtpmap:0 PCMU/8000/1
> >
> > a=rtpmap:8 PCMA/8000/1
> >
> > a=rtpmap:101 telephone-event/8000
> >
> > a=fmtp:101 0-11
> >
> > m=video 7011 RTP/AVP 98 99 97 100
> >
> > b=AS:176
> >
> > a=rtpmap:98 H263-1998/90000
> >
> > a=fmtp:98 CIF=1;QCIF=1
> >
> > a=rtpmap:99 MP4V-ES/90000
> >
> > a=fmtp:99 profile-level-id=3
> >
> > a=rtpmap:97 theora/90000
> >
> > a=rtpmap:100 x-snow/90000
> >
> >
> > linphone-message : cb_sndinvite (id=2)
> > linphone-message : eXosip: timer sec:0 usec:100000!
> > linphone-message : Received message:
> > SIP/2.0 100 Trying
> >
> > Via: SIP/2.0/UDP 192.168.2.16:5060;rport=5060;branch=z9hG4bK208675205
> >
> > From: Conrad <sip:address@hidden>;tag=508960452
> >
> > To: Conrad Beckert <sip:address@hidden>
> >
> > Call-ID: 2084376213
> >
> > CSeq: 20 INVITE
> >
> > User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> >
> > Content-Length: 0
> >
> >
> >
> >
> > linphone-message : Message received from: 192.168.2.15:5060
> > linphone-message : Message received from: 192.168.2.15:5060
> > linphone-message : MESSAGE REC. CALLID:2084376213
> > linphone-message : Message received from: 192.168.2.15:5060
> > linphone-message : cb_rcv1xx (id=2)
> > linphone-message : eXosip: timer sec:10 usec:100000!
> > linphone-message : Received message:
> > SIP/2.0 101 Dialog Establishement
> >
> > Via: SIP/2.0/UDP 192.168.2.16:5060;rport=5060;branch=z9hG4bK208675205
> >
> > From: Conrad <sip:address@hidden>;tag=508960452
> >
> > To: Conrad Beckert <sip:address@hidden>;tag=5705
> >
> > Call-ID: 2084376213
> >
> > CSeq: 20 INVITE
> >
> > Contact: <sip:address@hidden:5060>
> >
> > User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> >
> > Content-Length: 0
> >
> >
> >
> >
> > linphone-message : Message received from: 192.168.2.15:5060
> > linphone-message : Message received from: 192.168.2.15:5060
> > linphone-message : MESSAGE REC. CALLID:2084376213
> > linphone-message : Message received from: 192.168.2.15:5060
> > linphone-message : cb_rcv1xx (id=2)
> > linphone-message : eXosip: timer sec:10 usec:100000!
> > linphone-message : CALL_PROCEEDING
> > linphone-message : CALL_PROCEEDING
> > linphone-message : Received message:
> > SIP/2.0 180 Ringing
> >
> > Via: SIP/2.0/UDP 192.168.2.16:5060;rport=5060;branch=z9hG4bK208675205
> >
> > From: Conrad <sip:address@hidden>;tag=508960452
> >
> > To: Conrad Beckert <sip:address@hidden>;tag=5705
> >
> > Call-ID: 2084376213
> >
> > CSeq: 20 INVITE
> >
> > Contact: <sip:address@hidden:5060>
> >
> > User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> >
> > Content-Length: 0
> >
> >
> >
> >
> > linphone-message : Message received from: 192.168.2.15:5060
> > linphone-message : Message received from: 192.168.2.15:5060
> > linphone-message : MESSAGE REC. CALLID:2084376213
> > linphone-message : Message received from: 192.168.2.15:5060
> > linphone-message : cb_rcv1xx (id=2)
> > linphone-message : eXosip: timer sec:10 usec:100000!
> > linphone-message : CALL_RINGING
> > linphone-message : Remote ringing...
> > linphone-message : /usr/local/share/sounds/linphone/ringback.wav opened:
> > rate=8000,channel=1 linphone-message : ms_filter_link:
> > MSFilePlayer:0xa0f2f48,0-->MSAlsaWrite:0xa119368,0 linphone-warning :
> > alsa_set_params: periodsize:256 Using 256
> > linphone-warning : alsa_set_params: period:8 Using 8
> > linphone-warning : We are late of 78 miliseconds.
> > linphone-message : Received message:
> > SIP/2.0 200 OK
> >
> > Via: SIP/2.0/UDP 192.168.2.16:5060;rport=5060;branch=z9hG4bK208675205
> >
> > From: Conrad <sip:address@hidden>;tag=508960452
> >
> > To: Conrad Beckert <sip:address@hidden>;tag=5705
> >
> > Call-ID: 2084376213
> >
> > CSeq: 20 INVITE
> >
> > Contact: <sip:address@hidden:5060>
> >
> > Content-Type: application/sdp
> >
> > User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> >
> > Content-Length:   450
> >
> >
> >
> > v=0
> >
> > o=2004 123456 654321 IN IP4 192.168.2.15
> >
> > s=A conversation
> >
> > c=IN IP4 192.168.2.15
> >
> > t=0 0
> >
> > m=audio 7000 RTP/AVP 3 0 8 101
> >
> > b=AS:80
> >
> > a=rtpmap:3 GSM/8000/1
> >
> > a=rtpmap:0 PCMU/8000/1
> >
> > a=rtpmap:8 PCMA/8000/1
> >
> > a=rtpmap:101 telephone-event/8000
> >
> > m=video 7001 RTP/AVP 98 99 97 100
> >
> > b=AS:176
> >
> > a=rtpmap:98 H263-1998/90000
> >
> > a=fmtp:98 CIF=1;QCIF=1
> >
> > a=rtpmap:99 MP4V-ES/90000
> >
> > a=fmtp:99 profile-level-id=3
> >
> > a=rtpmap:97 theora/90000
> >
> > a=rtpmap:100 x-snow/90000
> >
> >
> > linphone-message : Message received from: 192.168.2.15:5060
> > linphone-message : Message received from: 192.168.2.15:5060
> > linphone-message : MESSAGE REC. CALLID:2084376213
> > linphone-message : Message received from: 192.168.2.15:5060
> > linphone-message : cb_rcv2xx (id=2)
> > linphone-message : cb_nict_kill_transaction (id=2)
> > linphone-message : eXosip: timer sec:7 usec:100000!
> > linphone-message : CALL_ANSWERED
> >
> > linphone-message : Remote bandwidth constraint: 80
> > linphone-message : Remote bandwidth constraint: 80
> > linphone-message : Remote bandwidth constraint: 80
> > linphone-message : Remote bandwidth constraint: 80
> > linphone-message : Remote bandwidth constraint: 176
> > linphone-message : Remote bandwidth constraint: 176
> > linphone-message : Remote bandwidth constraint: 176
> > linphone-message : Remote bandwidth constraint: 176
> > linphone-message : ms_filter_unlink:
> > MSFilePlayer:0xa0f2f48,0-->MSAlsaWrite:0xa119368,0 linphone-message :
> > MSTicker thread exiting
> > linphone-message : Setting audio encoder network bitrate to 80000
> > linphone-message : ms_filter_link:
> > MSAlsaRead:0xa0b19b8,0-->MSGsmEnc:0xa0d40e8,0 linphone-message :
> > ms_filter_link: MSDtmfGen:0xa0d2f80,0-->MSAlsaWrite:0xa0d4060,0
> > linphone-message : ms_filter_link:
> > MSGsmEnc:0xa0d40e8,0-->MSRtpSend:0xa0c1108,0 linphone-message :
> > ms_filter_link: MSRtpRecv:0xa119368,0-->MSGsmDec:0xa0ce818,0
> > linphone-message : ms_filter_link:
> > MSGsmDec:0xa0ce818,0-->MSDtmfGen:0xa0d2f80,0 linphone-message :
> > alsa_open_r: opening default at 8000Hz, bits=16, stereo=0
> linphone-warning
> > : alsa_set_params: periodsize:256 Using 256
> > linphone-warning : alsa_set_params: period:8 Using 8
> > linphone-message : synchronizing timestamp, diff=800
> > linphone-warning : alsa_set_params: periodsize:256 Using 256
> > linphone-warning : alsa_set_params: period:8 Using 8
> > linphone-message : ms_filter_unlink:
> > MSV4L2Capture:0xa03faa8,0-->MSPixConv:0xa03fc78,0 linphone-message :
> > ms_filter_unlink: MSPixConv:0xa03fc78,0-->MSVideoOut:0xa03fbb0,0
> > linphone-message : MSTicker thread exiting
> > linphone-message : Using permissive algorithm
> > linphone-message : Limiting bitrate of video encoder to 176000 bits/s
> > linphone-message : parsing CIF=1;QCIF=1
> > linphone-message : Setting vsize=176x144, fps=10,000000
> > linphone-message : v4lv2: V4L2_PIX_FMT_YUYV choosen
> > linphone-message : Size of picture is 176x144
> > linphone-message : ms_filter_link:
> > MSV4L2Capture:0xb460c6f8,0-->MSPixConv:0xb460a018,0 linphone-message :
> > ms_filter_link: MSPixConv:0xb460a018,0-->MSSizeConv:0xb4609e50,0
> > linphone-message : ms_filter_link:
> > MSSizeConv:0xb4609e50,0-->MSTee:0xb460a3e8,0 linphone-message :
> > ms_filter_link: MSTee:0xb460a3e8,0-->MSH263Enc:0xb460a680,0
> > linphone-message : ms_filter_link:
> > MSH263Enc:0xb460a680,0-->MSRtpSend:0xa1016b0,0 linphone-message :
> > ms_filter_link: MSRtpRecv:0xb460b978,0-->MSH263Dec:0xb460cb00,0
> > linphone-message : ms_filter_link:
> > MSH263Dec:0xb460cb00,0-->MSVideoOut:0xb460a478,0 linphone-message :
> > ms_filter_link: MSTee:0xb460a3e8,1-->MSVideoOut:0xb460a478,1
> > linphone-message : Codec bitrate set to 123199
> > linphone-error : could not find encoder for codec id 5
> > linphone-message : Using yuv overlay.
> > linphone-message : YUV overlay using hardware acceleration.
> > linphone-message : DNS resolution with 192.168.2.15:5060
> > linphone-message : getaddrinfo returned the following addresses:
> > linphone-message : 192.168.2.15 port 5060
> > linphone-message : Message sent: (to dest=192.168.2.15:5060)
> > ACK sip:address@hidden:5060 SIP/2.0
> >
> > Via: SIP/2.0/UDP 192.168.2.16:5060;rport;branch=z9hG4bK1109913529
> >
> > From: Conrad <sip:address@hidden>;tag=508960452
> >
> > To: Conrad Beckert <sip:address@hidden>;tag=5705
> >
> > Call-ID: 2084376213
> >
> > CSeq: 20 ACK
> >
> > Contact: <sip:address@hidden:5060>
> >
> > Max-Forwards: 70
> >
> > User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> >
> > Content-Length: 0
> >
> >
> >
> >
> > linphone-message : No authentication info in the request, ignoring
> > linphone-message : bandwidth usage: audio=[d=36,7,u=31,2]
> > video=[d=0,0,u=0,0] kbit/sec linphone-message : v4lv2: V4L2_PIX_FMT_YUYV
> > choosen
> > linphone-message : Size of picture is 176x144
> > linphone-message : V4L2 video capture started.
> > linphone-warning : We are late of 63 miliseconds.
> > linphone-warning : We are late of 103 miliseconds.
> > linphone-message : bandwidth usage: audio=[d=29,7,u=29,8]
> > video=[d=20,8,u=0,0] kbit/sec linphone-message : bandwidth usage:
> > audio=[d=29,4,u=29,8] video=[d=67,2,u=0,0] kbit/sec linphone-message :
> > bandwidth usage: audio=[d=29,3,u=29,3] video=[d=78,5,u=0,0] kbit/sec
> > linphone-message : bandwidth usage: audio=[d=29,9,u=29,3]
> > video=[d=122,9,u=0,0] kbit/sec linphone-message :
> video_steam_process_rtcp:
> > receiving RTCP SR
> > linphone-message : interarrival jitter=0 , lost packets percentage since
> > last report=0,000000 linphone-message : bandwidth usage:
> > audio=[d=29,8,u=29,2] video=[d=59,4,u=0,0] kbit/sec linphone-message :
> > bandwidth usage: audio=[d=29,6,u=29,0] video=[d=202,5,u=0,0] kbit/sec
> > linphone-message : eXosip: timer sec:0 usec:100000!
> > linphone-message : eXosip: timer sec:0 usec:100000!
> > linphone-message : bandwidth usage: audio=[d=28,9,u=30,3]
> > video=[d=35,8,u=0,0] kbit/sec linphone-message : eXosip: timer sec:0
> > usec:100000!
> > linphone-message : eXosip: timer sec:0 usec:100000!
> > linphone-message : eXosip: timer sec:0 usec:100000!
> > linphone-warning : We are late of 109 miliseconds.
> > linphone-message : cb_nict_kill_transaction (id=1)
> > linphone-message : Release a terminated transaction
> > linphone-message : free transaction ressource 1 816241320
> > linphone-message : free nist ressource
> > linphone-message : eXosip: Reseting timer to 15s before waking up!
> > linphone-warning : We are late of 558 miliseconds.
> > linphone-warning : We are late of 392 miliseconds.
> > linphone-message : bandwidth usage: audio=[d=29,9,u=29,7]
> > video=[d=21,5,u=0,0] kbit/sec linphone-warning : We are late of 69
> > miliseconds.
> > linphone-warning : We are late of 127 miliseconds.
> > linphone-warning : We are late of 151 miliseconds.
> > linphone-warning : We are late of 114 miliseconds.
> > linphone-message : video_steam_process_rtcp: receiving RTCP SR
> > linphone-message : interarrival jitter=0 , lost packets percentage since
> > last report=0,000000 linphone-message : bandwidth usage:
> > audio=[d=29,9,u=29,4] video=[d=10,5,u=0,0] kbit/sec linphone-warning :
> We
> > are late of 779 miliseconds.
> > linphone-warning : We are late of 1248 miliseconds.
> > linphone-message : bandwidth usage: audio=[d=29,8,u=29,4]
> > video=[d=854,0,u=0,0] kbit/sec linphone-warning : We are late of 1306
> > miliseconds.
> > linphone-message : bandwidth usage: audio=[d=29,6,u=29,6]
> > video=[d=11,4,u=0,0] kbit/sec linphone-warning : We are late of 79
> > miliseconds.
> > linphone-warning : We are late of 87 miliseconds.
> > linphone-message : bandwidth usage: audio=[d=29,3,u=29,3]
> > video=[d=14,2,u=0,0] kbit/sec linphone-message : bandwidth usage:
> > audio=[d=29,4,u=30,0] video=[d=22,3,u=0,0] kbit/sec linphone-message :
> > video_steam_process_rtcp: receiving RTCP SR
> > linphone-message : interarrival jitter=0 , lost packets percentage since
> > last report=0,000000 linphone-message : bandwidth usage:
> > audio=[d=29,9,u=29,3] video=[d=0,0,u=0,0] kbit/sec linphone-message :
> > bandwidth usage: audio=[d=29,5,u=29,7] video=[d=2,2,u=0,0] kbit/sec
> > linphone-message : bandwidth usage: audio=[d=29,9,u=29,3]
> > video=[d=0,0,u=0,0] kbit/sec linphone-message : bandwidth usage:
> > audio=[d=29,8,u=29,8] video=[d=0,5,u=0,0] kbit/sec linphone-warning :
> Error
> > sending rtp packet: Resource temporarily unavailable ; socket=19
> > linphone-warning : Error sending rtp packet: Resource temporarily
> > unavailable ; socket=19 linphone-warning : Error sending rtp packet:
> > Resource temporarily unavailable ; socket=19 linphone-warning : Error
> > sending rtp packet: Resource temporarily unavailable ; socket=19
> > linphone-message : bandwidth usage: audio=[d=29,8,u=27,0]
> > video=[d=0,5,u=0,0] kbit/sec linphone-warning : Error sending rtp
> packet:
> > Resource temporarily unavailable ; socket=19 linphone-warning : Error
> > sending rtp packet: Resource temporarily unavailable ; socket=19
> > linphone-warning : Error sending rtp packet: Resource temporarily
> > unavailable ; socket=19 linphone-warning : Error sending rtp packet:
> > Resource temporarily unavailable ; socket=19 linphone-message :
> > video_steam_process_rtcp: receiving RTCP SR
> > linphone-message : interarrival jitter=0 , lost packets percentage since
> > last report=0,000000 linphone-warning : Error sending rtp packet:
> Resource
> > temporarily unavailable ; socket=19 linphone-warning : Error sending rtp
> > packet: Resource temporarily unavailable ; socket=19 linphone-warning :
> > Error sending rtp packet: Resource temporarily unavailable ; socket=19
> > linphone-warning : Error sending rtp packet: Resource temporarily
> > unavailable ; socket=19 ...
> >
> > linphone-warning : Error sending rtp packet: Resource temporarily
> > unavailable ; socket=19 linphone-warning : Error sending rtp packet:
> > Resource temporarily unavailable ; socket=19 linphone-warning : Error
> > sending rtp packet: Resource temporarily unavailable ; socket=19
> > linphone-warning : Error sending rtp packet: Resource temporarily
> > unavailable ; socket=19 linphone-message : eXosip: Reseting timer to 15s
> > before waking up! linphone-message : bandwidth usage:
> audio=[d=28,3,u=30,2]
> > video=[d=0,5,u=0,0] kbit/sec linphone-message :
> video_steam_process_rtcp:
> > receiving RTCP SR
> > linphone-message : interarrival jitter=0 , lost packets percentage since
> > last report=0,000000 linphone-message : synchronizing timestamp,
> diff=240
> > linphone-message : bandwidth usage: audio=[d=29,7,u=29,1]
> > video=[d=0,5,u=0,0] kbit/sec linphone-message : bandwidth usage:
> > audio=[d=23,9,u=29,9] video=[d=0,5,u=0,0] kbit/sec linphone-message :
> > bandwidth usage: audio=[d=56,5,u=29,5] video=[d=0,0,u=0,0] kbit/sec
> > linphone-message : bandwidth usage: audio=[d=29,9,u=29,3]
> > video=[d=0,5,u=0,0] kbit/sec linphone-message :
> video_steam_process_rtcp:
> > receiving RTCP SR
> > linphone-message : interarrival jitter=0 , lost packets percentage since
> > last report=0,000000 linphone-message : bandwidth usage:
> > audio=[d=29,8,u=29,5] video=[d=0,5,u=0,0] kbit/sec linphone-message :
> > bandwidth usage: audio=[d=29,4,u=30,3] video=[d=0,5,u=0,0] kbit/sec
> > linphone-message : bandwidth usage: audio=[d=29,8,u=29,2]
> > video=[d=2,0,u=0,0] kbit/sec linphone-message : bandwidth usage:
> > audio=[d=29,9,u=29,9] video=[d=0,6,u=0,0] kbit/sec linphone-message :
> > bandwidth usage: audio=[d=29,4,u=29,8] video=[d=0,6,u=0,0] kbit/sec
> > linphone-message : video_steam_process_rtcp: receiving RTCP SR
> > linphone-message : interarrival jitter=0 , lost packets percentage since
> > last report=0,000000 linphone-message : bandwidth usage:
> > audio=[d=29,7,u=29,1] video=[d=0,6,u=0,0] kbit/sec linphone-message :
> > bandwidth usage: audio=[d=29,4,u=29,8] video=[d=0,6,u=0,0] kbit/sec
> > linphone-message : bandwidth usage: audio=[d=29,3,u=29,3]
> > video=[d=2,1,u=0,0] kbit/sec linphone-message : bandwidth usage:
> > audio=[d=29,9,u=29,3] video=[d=0,6,u=0,0] kbit/sec linphone-message :
> > video_steam_process_rtcp: receiving RTCP SR
> > linphone-message : interarrival jitter=0 , lost packets percentage since
> > last report=0,000000 linphone-message : bandwidth usage:
> > audio=[d=29,7,u=29,7] video=[d=0,6,u=0,0] kbit/sec linphone-message :
> > eXosip: Reseting timer to 15s before waking up! linphone-message :
> > bandwidth usage: audio=[d=29,5,u=29,5] video=[d=0,6,u=0,0] kbit/sec
> > linphone-message : bandwidth usage: audio=[d=29,8,u=29,8]
> > video=[d=0,6,u=0,0] kbit/sec linphone-message : bandwidth usage:
> > audio=[d=29,1,u=29,0] video=[d=2,3,u=0,0] kbit/sec linphone-message :
> > bandwidth usage: audio=[d=28,6,u=29,5] video=[d=0,6,u=0,0] kbit/sec
> > linphone-message : video_steam_process_rtcp: receiving RTCP SR
> > linphone-message : interarrival jitter=0 , lost packets percentage since
> > last report=0,000000 linphone-message : bandwidth usage:
> > audio=[d=29,1,u=29,1] video=[d=0,7,u=0,0] kbit/sec linphone-message :
> > bandwidth usage: audio=[d=29,9,u=29,7] video=[d=0,7,u=0,0] kbit/sec
> > linphone-message : bandwidth usage: audio=[d=29,7,u=29,4]
> > video=[d=0,7,u=0,0] kbit/sec linphone-message : bandwidth usage:
> > audio=[d=29,4,u=30,2] video=[d=2,4,u=0,0] kbit/sec linphone-message :
> > video_steam_process_rtcp: receiving RTCP SR
> > linphone-message : interarrival jitter=0 , lost packets percentage since
> > last report=0,000000 linphone-message : bandwidth usage:
> > audio=[d=29,2,u=29,8] video=[d=0,7,u=0,0] kbit/sec linphone-message :
> > bandwidth usage: audio=[d=29,2,u=29,9] video=[d=0,7,u=0,0] kbit/sec
> > linphone-message : bandwidth usage: audio=[d=29,3,u=29,1]
> > video=[d=0,7,u=0,0] kbit/sec linphone-message : bandwidth usage:
> > audio=[d=29,6,u=29,6] video=[d=0,7,u=0,0] kbit/sec linphone-message :
> > bandwidth usage: audio=[d=29,4,u=29,8] video=[d=2,6,u=0,0] kbit/sec
> > linphone-message : video_steam_process_rtcp: receiving RTCP SR
> > linphone-message : interarrival jitter=0 , lost packets percentage since
> > last report=0,000000 linphone-message : bandwidth usage:
> > audio=[d=29,3,u=29,3] video=[d=74,6,u=0,0] kbit/sec linphone-message :
> > bandwidth usage: audio=[d=29,8,u=29,5] video=[d=28,2,u=0,0] kbit/sec
> > linphone-message : eXosip: Reseting timer to 15s before waking up!
> > linphone-message : bandwidth usage: audio=[d=30,0,u=29,5]
> > video=[d=4,7,u=0,0] kbit/sec linphone-message : bandwidth usage:
> > audio=[d=29,9,u=29,8] video=[d=1,7,u=0,0] kbit/sec linphone-message :
> > video_steam_process_rtcp: receiving RTCP SR
> > linphone-message : interarrival jitter=0 , lost packets percentage since
> > last report=0,000000 linphone-message : bandwidth usage:
> > audio=[d=29,2,u=29,2] video=[d=1,1,u=0,0] kbit/sec linphone-message :
> > bandwidth usage: audio=[d=29,7,u=29,7] video=[d=3,8,u=0,0] kbit/sec
> > linphone-warning : We are late of 489 miliseconds.
> > linphone-message : bandwidth usage: audio=[d=29,8,u=29,2]
> > video=[d=0,6,u=0,0] kbit/sec linphone-warning : We are late of 426
> > miliseconds.
> > linphone-warning : We are late of 104 miliseconds.
> > linphone-warning : We are late of 184 miliseconds.
> > linphone-warning : We are late of 169 miliseconds.
> > linphone-message : bandwidth usage: audio=[d=29,3,u=29,6]
> > video=[d=1,2,u=0,0] kbit/sec linphone-message :
> video_steam_process_rtcp:
> > receiving RTCP SR
> > linphone-message : interarrival jitter=0 , lost packets percentage since
> > last report=0,000000 linphone-message : bandwidth usage:
> > audio=[d=29,6,u=30,2] video=[d=1,1,u=0,0] kbit/sec linphone-message :
> > bandwidth usage: audio=[d=29,3,u=28,7] video=[d=1,1,u=0,0] kbit/sec
> > linphone-warning : We are late of 212 miliseconds.
> > linphone-warning : We are late of 148 miliseconds.
> > linphone-warning : We are late of 209 miliseconds.
> > linphone-warning : We are late of 90 miliseconds.
> > linphone-warning : We are late of 58 miliseconds.
> > linphone-message : bandwidth usage: audio=[d=29,5,u=29,5]
> > video=[d=5,6,u=0,0] kbit/sec linphone-warning : We are late of 499
> > miliseconds.
> > linphone-warning : We are late of 450 miliseconds.
> > linphone-warning : We are late of 399 miliseconds.
> > linphone-warning : We are late of 246 miliseconds.
> > linphone-message : bandwidth usage: audio=[d=30,3,u=29,7]
> > video=[d=1,3,u=0,0] kbit/sec linphone-warning : We are late of 242
> > miliseconds.
> > linphone-warning : We are late of 571 miliseconds.
> > linphone-message : bandwidth usage: audio=[d=29,8,u=29,4]
> > video=[d=0,7,u=0,0] kbit/sec linphone-warning : We are late of 890
> > miliseconds.
> > linphone-message : video_steam_process_rtcp: receiving RTCP SR
> > linphone-message : interarrival jitter=0 , lost packets percentage since
> > last report=0,000000 linphone-warning : We are late of 938 miliseconds.
> > linphone-warning : We are late of 992 miliseconds.
> > linphone-warning : We are late of 927 miliseconds.
> > linphone-warning : We are late of 895 miliseconds.
> > linphone-warning : We are late of 854 miliseconds.
> > linphone-warning : We are late of 824 miliseconds.
> > linphone-message : bandwidth usage: audio=[d=29,5,u=29,3]
> > video=[d=1,0,u=0,0] kbit/sec linphone-warning : We are late of 792
> > miliseconds.
> > linphone-warning : We are late of 622 miliseconds.
> > linphone-warning : We are late of 473 miliseconds.
> > linphone-message : bandwidth usage: audio=[d=29,9,u=29,6]
> > video=[d=1,3,u=0,0] kbit/sec linphone-message : bandwidth usage:
> > audio=[d=29,6,u=29,4] video=[d=5,0,u=0,0] kbit/sec linphone-message :
> > bandwidth usage: audio=[d=29,5,u=29,5] video=[d=1,4,u=0,0] kbit/sec
> > linphone-message : allocating transaction ressource 3 2084376213
> > linphone-message : allocating NICT context
> > linphone-message : DNS resolution with 192.168.2.15:5060
> > linphone-message : getaddrinfo returned the following addresses:
> > linphone-message : 192.168.2.15 port 5060
> > linphone-message : Message sent: (to dest=192.168.2.15:5060)
> > BYE sip:address@hidden:5060 SIP/2.0
> >
> > Via: SIP/2.0/UDP 192.168.2.16:5060;rport;branch=z9hG4bK181760271
> >
> > From: Conrad <sip:address@hidden>;tag=508960452
> >
> > To: Conrad Beckert <sip:address@hidden>;tag=5705
> >
> > Call-ID: 2084376213
> >
> > CSeq: 21 BYE
> >
> > Contact: <sip:address@hidden:5060>
> >
> > Max-Forwards: 70
> >
> > User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> >
> > Content-Length: 0
> >
> >
> >
> >
> > linphone-message : cb_sndbye (id=3)
> > linphone-message : eXosip: timer sec:0 usec:100000!
> > linphone-message : oRTP-stats:
> >    Audio session's RTP statistics :
> > linphone-message :  number of rtp packet sent=4084
> > linphone-message :  number of rtp bytes sent=183780 bytes
> > linphone-message :  number of rtp packet received=4036
> > linphone-message :  number of rtp bytes received=181620 bytes
> > linphone-message :  number of incoming rtp bytes successfully delivered
> to
> > the application=181260 linphone-message :  number of times the
> application
> > queried a packet that didn't exist=8172 linphone-message :  number of
> rtp
> > packet lost=52
> > linphone-message :  number of rtp packets received too late=5
> > linphone-message :  number of bad formatted rtp packets=0
> > linphone-message :  number of packet discarded because of queue
> overflow=0
> > linphone-message : ms_filter_unlink:
> > MSAlsaRead:0xa0b19b8,0-->MSGsmEnc:0xa0d40e8,0 linphone-message :
> > ms_filter_unlink: MSDtmfGen:0xa0d2f80,0-->MSAlsaWrite:0xa0d4060,0
> > linphone-message : ms_filter_unlink:
> > MSGsmEnc:0xa0d40e8,0-->MSRtpSend:0xa0c1108,0 linphone-message :
> > ms_filter_unlink: MSRtpRecv:0xa119368,0-->MSGsmDec:0xa0ce818,0
> > linphone-message : ms_filter_unlink:
> > MSGsmDec:0xa0ce818,0-->MSDtmfGen:0xa0d2f80,0 linphone-message : MSTicker
> > thread exiting
> > linphone-message : Received message:
> > SIP/2.0 200 OK
> >
> > Via: SIP/2.0/UDP 192.168.2.16:5060;rport=5060;branch=z9hG4bK181760271
> >
> > From: Conrad <sip:address@hidden>;tag=508960452
> >
> > To: Conrad Beckert <sip:address@hidden>;tag=5705
> >
> > Call-ID: 2084376213
> >
> > CSeq: 21 BYE
> >
> > User-Agent: Linphone/3.0.0 (eXosip2/3.1.0)
> >
> > Content-Length: 0
> >
> >
> >
> >
> > linphone-message : Message received from: 192.168.2.15:5060
> > linphone-message : Message received from: 192.168.2.15:5060
> > linphone-message : MESSAGE REC. CALLID:2084376213
> > linphone-message : Message received from: 192.168.2.15:5060
> > linphone-message : cb_rcv2xx (id=3)
> > linphone-message : eXosip: timer sec:5 usec:10000!
> > linphone-message : oRTP-stats:
> >    Video session's RTP statistics :
> > linphone-message :  number of rtp packet sent=0
> > linphone-message :  number of rtp bytes sent=0 bytes
> > linphone-message :  number of rtp packet received=105
> > linphone-message :  number of rtp bytes received=21214 bytes
> > linphone-message :  number of incoming rtp bytes successfully delivered
> to
> > the application=19294 linphone-message :  number of times the
> application
> > queried a packet that didn't exist=8153 linphone-message :  number of
> rtp
> > packet lost=0
> > linphone-message :  number of rtp packets received too late=0
> > linphone-message :  number of bad formatted rtp packets=15
> > linphone-message :  number of packet discarded because of queue
> overflow=0
> > linphone-message : ms_filter_unlink:
> > MSV4L2Capture:0xb460c6f8,0-->MSPixConv:0xb460a018,0 linphone-message :
> > ms_filter_unlink: MSPixConv:0xb460a018,0-->MSSizeConv:0xb4609e50,0
> > linphone-message : ms_filter_unlink:
> > MSSizeConv:0xb4609e50,0-->MSTee:0xb460a3e8,0 linphone-message :
> > ms_filter_unlink: MSTee:0xb460a3e8,0-->MSH263Enc:0xb460a680,0
> > linphone-message : ms_filter_unlink:
> > MSH263Enc:0xb460a680,0-->MSRtpSend:0xa1016b0,0 linphone-message :
> > ms_filter_unlink: MSRtpRecv:0xb460b978,0-->MSH263Dec:0xb460cb00,0
> > linphone-message : ms_filter_unlink:
> > MSH263Dec:0xb460cb00,0-->MSVideoOut:0xb460a478,0 linphone-message :
> > ms_filter_unlink: MSTee:0xb460a3e8,1-->MSVideoOut:0xb460a478,1
> > linphone-message : MSTicker thread exiting
> > linphone-message : v4lv2: V4L2_PIX_FMT_YUYV choosen
> > linphone-message : Size of picture is 352x288
> > linphone-message : ms_filter_link:
> > MSV4L2Capture:0xa0e9420,0-->MSPixConv:0xa0a1820,0 linphone-message :
> > ms_filter_link: MSPixConv:0xa0a1820,0-->MSVideoOut:0xa08de30,0
> > linphone-message : Using yuv overlay.
> > linphone-message : YUV overlay using hardware acceleration.
> > linphone-message : Notifying all friends that we are in status 1
> > linphone-message : Unhandled exosip event !
> > linphone-message : v4lv2: V4L2_PIX_FMT_YUYV choosen
> > linphone-message : Size of picture is 352x288
> > linphone-message : V4L2 video capture started.
> > linphone-message : cb_nict_kill_transaction (id=3)
> > linphone-message : eXosip: eXosip_release_finished_calls remove a dialog
> > (cid=1 did=-1) linphone-message : eXosip: remove a call
> > linphone-message : Release a terminated transaction
> > linphone-message : free transaction ressource 2 2084376213
> > linphone-message : free ict ressource
> > linphone-message : Release a terminated transaction
> > linphone-message : free transaction ressource 3 2084376213
> > linphone-message : free nict ressource
> > linphone-message : eXosip: Reseting timer to 15s before waking up!
> > linphone-message : eXosip: Reseting timer to 15s before waking up!
> > linphone-message : CALL_RELEASED
> >
> > linphone-message : ms_filter_unlink:
> > MSV4L2Capture:0xa0e9420,0-->MSPixConv:0xa0a1820,0 linphone-message :
> > ms_filter_unlink: MSPixConv:0xa0a1820,0-->MSVideoOut:0xa08de30,0
> > linphone-message : MSTicker thread exiting
> >
> >
> >
> >
> > _______________________________________________
> > Linphone-developers mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/linphone-developers
> 




reply via email to

[Prev in Thread] Current Thread [Next in Thread]