Re: [Linphone-developers] Video? Almost working...

[Michael Frey]

Simon,

I now have things working.  It turns out it was my v4l kernel  
driver.  I now can send and receive video.  However there are two  
issues.

1: Video does not work if behind a firewall -- while audio does.  Is  
there something I can try to fix this?

2: The video packets being received are not quite right.  I get many  
errors from the libavcodec when trying to decode the incomming  
packets.  It is in the h.263 codec.  The image on the screen has some  
of the correct picture but is mostly "garbage".

Could the encode be going wrong?  Or the RTP packets not being set up  
correctly?  Does this work for you?

Michael

On Oct 27, 2005, at 10:13 AM, Simon Morlat wrote:

> Hello,
>
> It seems you were running linphonec as root, isn't it ?
> I recommend not do that with experimental code, it can be the  
> reason why your
> machine freezes.
> Try as a normal user and see what debug messages you have after that.
>
> Simon
>
> Le Mardi 25 Octobre 2005 15:42, Michael Frey a écrit :
>
> > Has anyone been able to get video working?
> >
> > I have linphone built with video support and I get so far as when
> > launching linphonec I get a video window whith local live video
> > playback.  (looks great!)
> >
> > When I attempt to make a call, my machine freezes.  I know Video
> > support is experimental, but I was wondering if I could make it work
> > somehow.
> >
> >
> > Here is the output from the console:
> >
> > c sip:address@hidden
> > Contacting  sip:address@hidden
> > linphonec> Message:CALL_RINGING
> >
> > Warning:payload has no rtpmap.
> > Connected.
> > Message:ms_filter_add_link: OssRead,0 -> MULAWEncoder,0
> > Message:ms_filter_add_link: MULAWEncoder,0 -> RTPSend,0
> > Message:ms_filter_add_link: RTPRecv,0 -> MULAWDecoder,0
> > Message:ms_filter_add_link: MULAWDecoder,0 -> OssWrite,0
> > Message:Opening sound card [UCB1400 (Advanced Linux Sound
> > Architecture)] in capture mode with stereo=0,rate=8000,bits=16
> > Message:alsa_set_params:  blocksize=1024.
> > Message:Opening sound card [UCB1400 (Advanced Linux Sound
> > Architecture)] in playback mode with stereo=0,rate=8000,bits=16
> > Message:alsa_set_params:  blocksize=1024.
> > Message:Setting thread to realtime
> >
> > Message:Mediastreamer processing thread is exiting.
> > Message:Video encoder created: 40b1c930
> > Message:ms_filter_add_link: msv4l,0 -> AVEncoder,0
> > Message:ms_filter_add_link: AVEncoder,0 -> RTPSend,0
> > Message:ms_filter_add_link: RTPRecv,0 -> AVdecoder,0
> > Message:ms_filter_add_link: AVdecoder,0 -> MSSdlOut,0
> > Message:ms_filter_add_link: AVEncoder,1 -> MSSdlOut,1
> > Message:Getting video channel ZC301-2
> > Message:Channel is a camera
> > Message:A valid video channel was found.
> > Message:Picture properties: depth=24, palette=4.
> > Message:Using 4-frames mmap'd buffer.
> > Warning:ms_filter_search_upstream_by_type: filter AVEncoder has no  
> > info.
> > Warning:ms_filter_search_upstream_by_type: filter AVEncoder has no  
> > info.
> > Warning:ms_rtp_send_setup: could not find upstream codec.
> > Message:Setting thread to realtime
> >
> > Warning:Must catchup 95 miliseconds.
> > Warning:Must catchup 90 miliseconds.
> > Warning:Must catchup 81 miliseconds.
> > Warning:Must catchup 74 miliseconds.
> > Warning:Must catchup 66 miliseconds.
> > Warning:Must catchup 56 miliseconds.
> > Message:Using yuv overlay.
> >
> >
> > Thanks in advance,
> >
> > Michael
> >
> >
> >
> >
> > _______________________________________________
> > Linphone-developers mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/linphone-developers