Re: vertical position MultiMeasureRest

[Tao Cumplido]

Thanks. At first it was really helpful but later I realized that the textscript 
in pnChords is now affected by notes in pnUp and moved to avoid collision (at 
least that's what I think the reason is).
And I actually used the voice with the skips to avoid that.
Now I tried to find something to turn that behavior off but nothing I tried 
worked.
Hope you (or someone else) know what to do in this case.

regards,

Tao


-------- Original-Nachricht --------
Datum: Thu, 28 Jun 2007 13:14:56 +0200
Von: Mats Bengtsson <address@hidden>
An: Tao Cumplido <address@hidden>
CC: address@hidden
Betreff: Re: vertical position MultiMeasureRest

> You can simplify your code significantly, by not using the <<{...} \\ 
> {...} >>
> feature when you combine the music \pnUp with the chords \pnChords.
> Just replace your line
> \new Staff = "pn" { << \pnUp \\ \pnChords >> }
> by
> \new Voice = "pn" { << \pnUp \pnChords >> }
> This will put both \pnUp and \pnChords as two parallel lines within the
> same Voice context, which means that you don't have to fiddle around with
> the stem directions or rest positions or anything.
> I strongly encourage you to read the section on "Explicitly 
> instantiating voices"
> carefully, to get a better understanding on when it is and when it's not
> appropriate to use the \\ feature.
> 
> The reason that the setting didn't work in your example is probably that
> you had nested two <<{...} \\ {...} >> constructs within each other. It's
> probably not really well defined what should happen then.
> 
>    /Mats
> 
> Tao Cumplido wrote:
> > thanks Mats.
> > I got it tow work now when I put the \override directly before the 'R1'
> but it doesn't work when it is at the top.
> > I'll post my code, maybe you can see better what I do wrong.
> >
> > regards,
> >
> > Tao
> >
> >
> > %%%
> >
> > \version "2.10.23"
> >
> > \header
> > {
> >     title = "Aqui Se Puede"
> >     composer = "C. Curet Alonso"
> > }
> >
> > sharpFix = \once \override Voice.TextScript #'padding = #3.05
> >
> > flatFix = \once \override Voice.TextScript #'padding = #3.3
> >
> > makeSlash =
> > {
> >     \override NoteHead #'style = #'slash
> >     \override Stem #'transparent = ##t
> > }
> >
> > makeNote =
> > {
> >     \revert NoteHead #'style
> >     \revert Stem #'transparent
> > }
> >
> > rhyOn =
> > {
> >     \revert Stem #'transparent
> >     \override NoteHead #'style = #'slash
> > }
> >
> > rhyOff = \revert NoteHead #'style
> >
> > pnUp = \relative c' 
> > {
> >     \key a \minor \stemNeutral
> >     \override Rest #'staff-position = #0
> >     \override MultiMeasureRest #'staff-position = #0
> >     fis8 d a' fis d' a fis d | f! d as' f d' as f d | e c g' e c' g e c |
> es c g' es c' g es c |
> >     d8 bes f' d bes' f d bes | fis' a, d fis gis b, e gis | \bar "||"
> \makeSlash \repeat unfold 7 { b4 } r8
> >     \rhyOn b8~ | b4. b b4 | \makeSlash b b b b | \rhyOn b-. r8 b~ b4 b |
> \clef bass \makeSlash d,, d d d |
> >     \rhyOn d2.. \rhyOff << { b'8 } \\ { b,} >> | \stemNeutral <e e,>1 | r8
> e' e, bes'~ bes4 a8 a | R1 |
> >     \clef treble \bar "||"
> > }
> >
> > pnChords =
> > {
> >     %\override Voice.TextScript #'font-name = #"JazzChords"
> >     \override Voice.TextScript #'padding = #3.5
> >     \override Voice.TextScript #'font-size = #2
> >     s1*6 | s1^"Am7" | s2. s8 s8^"Dm7" | s4. s^"G7/f9" s4^"CM" | s1 |
> s4^"Cm7" s8 s^"F7/f9" s4 \flatFix s^"BbM" |
> >     s1 | s1^"E7S" | s1 | s8^"N.C." s4 \flatFix s4.^"Bb13/s11" s4^"Am6/9" |
> s1 |
> > }
> >
> > \new Staff = "pn" { << \pnUp \\ \pnChords >> }
> >
> > %%%
> >
> >
> > -------- Original-Nachricht --------
> > Datum: Thu, 28 Jun 2007 08:17:20 +0200
> > Von: Mats Bengtsson <address@hidden>
> > An: address@hidden
> > CC: address@hidden
> > Betreff: Re: vertical position MultiMeasureRest
> >
> >   
> >> It  certainly works here:
> >>
> >> \version "2.10.25"
> >> \score{
> >> {
> >> R1
> >> \once \override MultiMeasureRest #'staff-position = #6 R1
> >> << { R1 } \\ { R1 \override MultiMeasureRest #'staff-position = #0 R1 }
> >>
> >> }
> >> }
> >>
> >>    /Mats
> >>
> >> address@hidden wrote:
> >>     
> >>> hello,
> >>>
> >>> how can I set the vertical position of MultiMeasureRests in a
> polyphonic
> >>>       
> >> staff?
> >>     
> >>> '\override MultiMeasureRest #'staff-position = #0' doesn't work, which
> >>>       
> >> is strange because '\override Rest #'staff-position = #0' works just
> fine.
> >>     
> >>> I use version 2.10.23 on winXP.
> >>>
> >>> regards,
> >>>
> >>> Tao
> >>>   
> >>>       
> >> -- 
> >> =============================================
> >>    Mats Bengtsson
> >>    Signal Processing
> >>    Signals, Sensors and Systems
> >>    Royal Institute of Technology
> >>    SE-100 44  STOCKHOLM
> >>    Sweden
> >>    Phone: (+46) 8 790 8463                         
> >>         Fax:   (+46) 8 790 7260
> >>    Email: address@hidden
> >>    WWW: http://www.s3.kth.se/~mabe
> >> =============================================
> >>     
> >
> >   
> 
> -- 
> =============================================
>       Mats Bengtsson
>       Signal Processing
>       Signals, Sensors and Systems
>       Royal Institute of Technology
>       SE-100 44  STOCKHOLM
>       Sweden
>       Phone: (+46) 8 790 8463                         
>         Fax:   (+46) 8 790 7260
>       Email: address@hidden
>       WWW: http://www.s3.kth.se/~mabe
> =============================================

-- 
Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! 
Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer