Re: Lilypond build

[Federico Bruni]

Il giorno ven 18 set 2020 alle 10:18, Michael Käppler 
<xmichael-k@web.de> ha scritto:
> Am 18.09.2020 um 00:49 schrieb Federico Bruni:
> > Il giorno mer 16 set 2020 alle 15:39, Michael Käppler
> > <xmichael-k@web.de> ha scritto:
> > > Am 16.09.2020 um 13:45 schrieb Michael Käppler:
> > > > Am 16.09.2020 um 12:18 schrieb Federico Bruni:
> > > > > Il giorno sab 12 set 2020 alle 15:13, Jonas Hahnfeld
> > > > > <hahnjo@hahnjo.de> ha scritto:
> > > > > > I think right now it makes most sense to just release 2.21.6 as a
> > > > > > "normal" unstable release, without any extra wording. The issue 
> > > > > > with
> > > > > > the Documentation build should again be fixed, so from my 
> > > > > > perspective
> > > > > > you should be good to go (if you have time).
> > > > >
> > > > > I was working on updating the italian website last night (on the
> > > > > translation branch) and I saw a strange error related to texidoc
> > > > > snippets when running 'make doc'.
> > > > >
> > > > > I don't have time to investigate.. perhaps updating the italian
> > > > > texidoc would solve the issue?
> > > > Trying to reproduce this here, build is running...
> > > Completed without errors for me.
> > >
> > > My steps:
> > >
> > > git checkout translation
> > > ./autogen.sh --noconfigure
> > > mkdir build
> > > cd build
> > > ../configure --enable-gs-api
> > > make && make doc
> >
> > I've just run make&&make doc again.
> > I don't get my previous error anymore. For the records, it was this 
> > one:
> >
> > Making Documentation/out-www/it/snippets.texi < tely
> > Command '/home/fede/src/lilypond-git/out/bin/lilypond -dbackend=eps
> > --formats=ps,png,pdf  -dinclude-eps-fonts -dgs-load-fonts
> > --header=doctitle --header=doctitleen --header=doctitleca
> > --header=doctitlecs --header=doctitlede --header=doctitlees
> > --header=doctitlefr --header=doctitlehu --header=doctitleit
> > --header=doctitleja --header=doctitlenl --header=doctitlept
> > --header=doctitlezh --header=texidoc --header=texidocen
> > --header=texidocca --header=texidoccs --header=texidocde
> > --header=texidoces --header=texidocfr --header=texidochu
> > --header=texidocit --header=texidocja --header=texidocnl
> > --header=texidocpt --header=texidoczh -dcheck-internal-types
> > -ddump-signatures -danti-alias-factor=2 -I "./"  -I
> > "/home/fede/src/lilypond-git/Documentation"  -I
> > "/home/fede/src/lilypond-git/Documentation/it"  -I
> > "/home/fede/src/lilypond-git/Documentation/it/included"  -I
> > "/home/fede/src/lilypond-git/Documentation/it"  -I
> > "/home/fede/src/lilypond-git/Documentation/pictures"  -I
> > "/home/fede/src/lilypond-git/Documentation/out-www/it"  -I
> > "/home/fede/src/lilypond-git/Documentation/out-www/en"  -I
> > "/home/fede/src/lilypond-git/Documentation/en"  -I
> > "/home/fede/src/lilypond-git/Documentation/en/included"  -I
> > "/home/fede/src/lilypond-git/input/regression"  -I
> > "/home/fede/src/lilypond-git/Documentation/out-www"  -I
> > "/home/fede/src/lilypond-git/Documentation" --formats=eps
> > -deps-box-padding=3.000000  -dread-file-list -dno-strip-output-dir
> > "/home/fede/src/lilypond-git/out/lybook-db/snippet-names-0924ca039783b7203dbd935e9c6796d7.ly"'
> > died with <Signals.SIGSEGV: 11>.
> > make[2]: *** [../make/lilypond-book-rules.make:6:
> > out-www/it/learning.texi] Error 1
> > make[2]: *** Deleting file 'out-www/it/learning.texi'
> > make[2]: *** Waiting for unfinished jobs....
> > make[2]: Leaving directory 
> > '/home/fede/src/lilypond-git/Documentation'
> > make[1]: ***
> > [/home/fede/src/lilypond-git/stepmake/stepmake/generic-targets.make:150:
> > WWW] Error 2
> > make[1]: Leaving directory '/home/fede/src/lilypond-git'
> > make: ***
> > [/home/fede/src/lilypond-git/stepmake/stepmake/generic-targets.make:155:
> > doc] Errore 2
> Hmm... seems to be a segfault. Can you tell what you changed that it
> works now?

Nothing changed in the source... I just ran again `make`, that's the 
only difference.


> > I'm now getting another error, even though the built docs seem 
> > complete.
> > I wonder if it's related to the fact I'm using Texlive 2020.
> >
> > $ tail
> > /home/fede/src/lilypond-git/Documentation/./out-www/it/web.texi2pdf.logl6699:
> > Undefined cross reference `Changes-pg'.)) [172]][172][173][174]
> > xdvipdfmx:warning: Glyph width mismatch for TFM and font (feymr10)
> > xdvipdfmx:warning: TFM: 727.092 vs. Type1 font: 705
> >
> > 2513452 bytes written
> > )
> > (see the transcript file for additional information)
> > Output written on web.pdf (174 pages).
> > Transcript written on web.log.
> > /usr/bin/texi2dvi:
> > /home/fede/src/lilypond-git/scripts/build/xetex-with-options.sh 
> > exited
> > with bad status, quitting.
> What happens if you run your systems texi2pdf (aka texi2dvi --pdf)
> directly on Documentation/out-www/it/web.texi ?

[fede@localhost lilypond-git (translation)]$ texi2pdf 
Documentation/out-www/it/web.texi
This is pdfTeX, Version 3.14159265-2.6-1.40.21 (TeX Live 2020) 
(preloaded format=pdfetex)
restricted \write18 enabled.
entering extended mode

(./Documentation/out-www/it/web.texi
(/usr/share/texlive/texmf-dist/tex/texinfo/texinfo.tex
Loading texinfo [version 2019-09-20.22]: pdf, fonts, markup, glyphs,
page headings, tables, conditionals, indexing, sectioning, toc, 
environments,
defuns, macros, cross references, insertions,
(/usr/share/texlive/texmf-dist/tex/generic/epsf/epsf.tex
This is `epsf.tex' v2.7.4 <14 February 2011>
) localization, formatting, and turning on texinfo input format.)
(/usr/share/texlive/texmf-dist/tex/texinfo/txi-it.tex no patterns for 
italian)
/Documentation/out-www/it/web.texi:18: I can't find file 
`macros.itexi'.
@temp ->@input macros.itexi

@includezzz ...and @input #1 }@expandafter }@temp
                                                 @popthisfilestack
l.18 @include macros.itexi

(Press Enter to retry, or Control-D to exit)
Please type another input file name
/Documentation/out-www/it/web.texi:18: Emergency stop.
@temp ->@input macros.itexi

@includezzz ...and @input #1 }@expandafter }@temp
                                                 @popthisfilestack
l.18 @include macros.itexi

/Documentation/out-www/it/web.texi:18:  ==> Fatal error occurred, no 
output PD
F file produced!
Transcript written on web.log.
/usr/bin/texi2dvi: pdfetex exited with bad status, quitting.
[fede@localhost lilypond-git (translation)]$
[fede@localhost lilypond-git (translation)]$
[fede@localhost lilypond-git (translation)]$ find . -name 'macros.itexi'
/Documentation/ca/macros.itexi
/Documentation/cs/macros.itexi
/Documentation/de/macros.itexi
/Documentation/es/macros.itexi
/Documentation/fr/macros.itexi
/Documentation/hu/macros.itexi
/Documentation/it/macros.itexi
/Documentation/ja/macros.itexi
/Documentation/nl/macros.itexi
/Documentation/zh/macros.itexi
/Documentation/pt/macros.itexi
/Documentation/en/macros.itexi


Find attached web.log

web.log
Description: Text Data