[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Gub / Windows Subsystem for Linux
From: |
Karlin High |
Subject: |
Re: Gub / Windows Subsystem for Linux |
Date: |
Tue, 23 Jul 2019 16:35:26 -0500 |
On Tue, Jul 23, 2019 at 10:40 AM Knut Petersen
<address@hidden> wrote:
> Ok, please send the whole target/darwin/ppc/log/odcctools.log
Attached.
> To be on the safe side execute
$ sudo apt-get --yes --no-install-recommends install file git gcc g++
libc6-dev-i386 make texlive-plain-generic texlive-fonts-recommended
texlive-metapost texlive-xetex unzip zip
[sudo] password for karlin:
Reading package lists... Done
Building dependency tree
Reading state information... Done
libc6-dev-i386 is already the newest version (2.27-3ubuntu1).
make is already the newest version (4.1-9.1ubuntu1).
unzip is already the newest version (6.0-21ubuntu1).
zip is already the newest version (3.0-11build1).
texlive-fonts-recommended is already the newest version (2017.20180305-1).
texlive-metapost is already the newest version (2017.20180305-1).
texlive-plain-generic is already the newest version (2017.20180305-2).
texlive-xetex is already the newest version (2017.20180305-1).
file is already the newest version (1:5.32-2ubuntu0.2).
g++ is already the newest version (4:7.4.0-1ubuntu2.3).
gcc is already the newest version (4:7.4.0-1ubuntu2.3).
git is already the newest version (1:2.17.1-1ubuntu0.4).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
>
> Then try these commands:
>
> make PLATFORMS=linux-64 LILYPOND_BRANCH=master lilypond-installer
> make PLATFORMS=linux-x86 LILYPOND_BRANCH=master lilypond-installer
> make PLATFORMS=linux-ppc LILYPOND_BRANCH=master lilypond-installer
> make PLATFORMS=freebsd-x86 LILYPOND_BRANCH=master lilypond-installer
> make PLATFORMS=freebsd-64 LILYPOND_BRANCH=master lilypond-installer
> make PLATFORMS=mingw LILYPOND_BRANCH=master lilypond-installer
> make LILYPOND_BRANCH=master lilypond-doc
> make PLATFORMS=darwin-x86 LILYPOND_BRANCH=master lilypond-installer
gub@SAFEOFFICE:~/gub$ make PLATFORMS=linux-64 LILYPOND_BRANCH=master
lilypond-installer
make -f lilypond.make lilypond-installer
make[1]: Entering directory '/home/gub/gub'
make[1]: *** No rule to make target 'lilypond-installer'. Stop.
make[1]: Leaving directory '/home/gub/gub'
GNUmakefile:29: recipe for target 'lilypond-installer' failed
make: *** [lilypond-installer] Error 2
gub@SAFEOFFICE:~/gub$ make PLATFORMS=linux-x86 LILYPOND_BRANCH=master
lilypond-installer
make -f lilypond.make lilypond-installer
make[1]: Entering directory '/home/gub/gub'
make[1]: *** No rule to make target 'lilypond-installer'. Stop.
make[1]: Leaving directory '/home/gub/gub'
GNUmakefile:29: recipe for target 'lilypond-installer' failed
make: *** [lilypond-installer] Error 2
gub@SAFEOFFICE:~/gub$ make PLATFORMS=linux-ppc LILYPOND_BRANCH=master
lilypond-installer
make -f lilypond.make lilypond-installer
make[1]: Entering directory '/home/gub/gub'
make[1]: *** No rule to make target 'lilypond-installer'. Stop.
make[1]: Leaving directory '/home/gub/gub'
GNUmakefile:29: recipe for target 'lilypond-installer' failed
make: *** [lilypond-installer] Error 2
gub@SAFEOFFICE:~/gub$ make PLATFORMS=freebsd-x86
LILYPOND_BRANCH=master lilypond-installer
make -f lilypond.make lilypond-installer
make[1]: Entering directory '/home/gub/gub'
make[1]: *** No rule to make target 'lilypond-installer'. Stop.
make[1]: Leaving directory '/home/gub/gub'
GNUmakefile:29: recipe for target 'lilypond-installer' failed
make: *** [lilypond-installer] Error 2
gub@SAFEOFFICE:~/gub$ make PLATFORMS=freebsd-64 LILYPOND_BRANCH=master
lilypond-installer
make -f lilypond.make lilypond-installer
make[1]: Entering directory '/home/gub/gub'
make[1]: *** No rule to make target 'lilypond-installer'. Stop.
make[1]: Leaving directory '/home/gub/gub'
GNUmakefile:29: recipe for target 'lilypond-installer' failed
make: *** [lilypond-installer] Error 2
gub@SAFEOFFICE:~/gub$ make PLATFORMS=mingw LILYPOND_BRANCH=master
lilypond-installer
make -f lilypond.make lilypond-installer
make[1]: Entering directory '/home/gub/gub'
make[1]: *** No rule to make target 'lilypond-installer'. Stop.
make[1]: Leaving directory '/home/gub/gub'
GNUmakefile:29: recipe for target 'lilypond-installer' failed
make: *** [lilypond-installer] Error 2
gub@SAFEOFFICE:~/gub$ make PLATFORMS=darwin-x86 LILYPOND_BRANCH=master
lilypond-installer
make -f lilypond.make lilypond-installer
make[1]: Entering directory '/home/gub/gub'
make[1]: *** No rule to make target 'lilypond-installer'. Stop.
make[1]: Leaving directory '/home/gub/gub'
GNUmakefile:29: recipe for target 'lilypond-installer' failed
make: *** [lilypond-installer] Error 2
gub@SAFEOFFICE:~/gub$ make LILYPOND_BRANCH=master lilypond-doc
make -f lilypond.make lilypond-doc
make[1]: Entering directory '/home/gub/gub'
make[1]: *** No rule to make target 'lilypond-doc'. Stop.
make[1]: Leaving directory '/home/gub/gub'
GNUmakefile:29: recipe for target 'lilypond-doc' failed
make: *** [lilypond-doc] Error 2
Some memories are coming back now... there was something about Windows
Subsystem for Linux being really reluctant to run 32-bit stuff.
<https://wpdev.uservoice.com/forums/266908-command-prompt-console-windows-subsystem-for-l/suggestions/13377507-please-enable-wsl-to-run-32-bit-elf-binaries>
--
Karlin High
Missouri, USA
odcctools.log
Description: Binary data
- Gub / Windows Subsystem for Linux, Knut Petersen, 2019/07/22
- Re: Gub / Windows Subsystem for Linux, David Kastrup, 2019/07/22
- Re: Gub / Windows Subsystem for Linux, Karlin High, 2019/07/22
- Re: Gub / Windows Subsystem for Linux, Knut Petersen, 2019/07/22
- Re: Gub / Windows Subsystem for Linux, Karlin High, 2019/07/23
- Re: Gub / Windows Subsystem for Linux, Knut Petersen, 2019/07/23
- Re: Gub / Windows Subsystem for Linux,
Karlin High <=
- Re: Gub / Windows Subsystem for Linux, Karlin High, 2019/07/23
- Re: Gub / Windows Subsystem for Linux, Knut Petersen, 2019/07/24
- Re: Gub / Windows Subsystem for Linux, Karlin High, 2019/07/25
- Re: Gub / Windows Subsystem for Linux, Knut Petersen, 2019/07/26
- Re: Gub / Windows Subsystem for Linux, Karlin High, 2019/07/27
- Re: Gub / Windows Subsystem for Linux, Knut Petersen, 2019/07/27
- Re: Gub / Windows Subsystem for Linux, Karlin High, 2019/07/27
- Re: Gub / Windows Subsystem for Linux, Knut Petersen, 2019/07/23
- Re: Gub / Windows Subsystem for Linux, Karlin High, 2019/07/23
- Re: Gub / Windows Subsystem for Linux, Knut Petersen, 2019/07/24