[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[VCDImager] Re: Help-VCDImager digest, Vol 1 #174 - 1 msg
From: |
Tomas Morkus |
Subject: |
[VCDImager] Re: Help-VCDImager digest, Vol 1 #174 - 1 msg |
Date: |
Sat, 9 Feb 2002 11:40:53 +0100 (CET) |
Hi,
Herbert Valerio Riedel helped me to solve this problem. He adviced me to
use vcdxbuild + vcdxgen instead of vcdimager and that works.
Thanks, Herbert :-)
Tomas.
On Fri, 8 Feb 2002 address@hidden wrote:
> Send Help-VCDImager mailing list submissions to
> address@hidden
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mail.gnu.org/mailman/listinfo/help-vcdimager
> or, via email, send a message with subject or body 'help' to
> address@hidden
>
> You can reach the person managing the list at
> address@hidden
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Help-VCDImager digest..."
>
>
> Today's Topics:
>
> 1. SVCD and Nintaus 9901 (Tomas Morkus)
>
> --__--__--
>
> Message: 1
> Date: Fri, 08 Feb 2002 13:44:35 +0100
> From: Tomas Morkus <address@hidden>
> To: address@hidden
> Subject: [VCDImager] SVCD and Nintaus 9901
>
> Hello,
>
> I tried to create SVCD disc to be played in my Nintaus 9901 DVD player.
> When I create such SVCD disc, I can play it without any problem is
> software player XINE, but when I try it in my DVD player Nintaus, it
> does not work it all. The disc in the DVD player is reported to be SVCD,
> but no one picture is shown (screen is totally black) and time counter
> gets crazy - time is getting slower on the counter, one second on
> display
> takes more than five seconds in real time (maybe A. Einstein can explain
> it ).
> I'am using vcdimager v. 0.7.12 for Linux and the MPEG2 I created by
> transcode tool. When I burn the same MPEG2 file with NERO, my Nintaus
> plays this disc OK. And when I create VCD/XVCD in VCDImager, there is
> also no problem with Nintaus. Only SVCD are problematic ....
>
> I burn it with:
>
> vcdimager -t svcd test.mpg
> cdrdao write --device 0,0,0 videocd.cue
>
> I also tried create add empty directory SEGMENT as adviced on VCDImager
> main site and also the --broken-svcd-mode but nothing helped.
> What might be wrong ? I saw on VCDImager main site, that Nintaus should
> be
> supported, but there are at least two firmware versions ....
> I'd appreciate any help to get vcdimager working.
>
> Tomas Morkus.
>
>
>
> --__--__--
>
> _______________________________________________
> Help-VCDImager mailing list
> address@hidden
> http://mail.gnu.org/mailman/listinfo/help-vcdimager
>
>
> End of Help-VCDImager Digest
>
- [VCDImager] Re: Help-VCDImager digest, Vol 1 #174 - 1 msg,
Tomas Morkus <=