[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [VCDImager] Newbie svcd quiestion
From: |
Roman Hochleitner |
Subject: |
Re: [VCDImager] Newbie svcd quiestion |
Date: |
Thu, 13 Dec 2001 21:18:37 +0100 (CET) |
On Thu, 13 Dec 2001, Jorgensen, Jens wrote:
> The SVCD spec requires that the mpeg video be exactly 480x480
> resolution. No more, no less. Don't worry about the aspect ratio
> though--all pixels are not square and it will look just as it should.
> So, just scale in the width to 480 and you're good to go.
yoda says: for PAL so untrue this is
480x480 at 29.97fps is ok for NTSC, but for
PAL you have to use 480x576 25fps.
anyway you can use other resolutions than theese two, but then
you leave the SVCD standard and will have a XSVCD, which probably
no DVD player might play ;)
--
mfg Roman
------------------------------------------------------
Roman HOCHLEITNER address@hidden
student at the Vienna University of Technology AUSTRIA
------------------------------------------------------
- [VCDImager] Using mpeg2encode, Nicolas Kral, 2001/12/03
- Re: [VCDImager] Using mpeg2encode, Roman Hochleitner, 2001/12/03
- Re: [VCDImager] Newbie svcd quiestion, Nicolas Kral, 2001/12/13
- Re: [VCDImager] Newbie svcd quiestion, Matto Marjanovic, 2001/12/13
- Re: [VCDImager] Newbie svcd quiestion, Roman Hochleitner, 2001/12/13
- Re: [VCDImager] Newbie svcd quiestion, Matto Marjanovic, 2001/12/13