RCS question ...

[Marcus MacWilliam]

If you have accidentally checked in a revision with the incorrect number,
is it possible to renumber the internal revision number in the RCS files.

         2.23------
          |       |
          |       |
         2.24   23.1 (should have been 2.23.1.1) <- need to renumber
          |
          |
         2.25
          |
          |
should be 2.26 but RCS complains the number must be bigger than 23.1

--
Marcus A.T MacWilliam, Senior Software Engineer. 1Spatial Ltd.
Cavendish House, 6 Cambridge Business Park, Cambridge, CB4 0WZ.
Tel: +44 (0)1223 420414, Mob: +44 (0)7803 706597.
Website: http://www.1spatial.com/

Review the 1Spatial Conference 2008: '1 Source of Truth'
Website: http://www.1spatial.com/conference


IMPORTANT NOTICE

This e-mail and any files transmitted with it are confidential and intended 
solely for the use of the individual or entity to whom they are addressed. If 
you have received this e-mail in error please notify the sender immediately and 
delete this e-mail from your system. Please note that any views or opinions 
presented in this e-mail are solely those of the author and do not necessarily 
represent those of 1Spatial Group Limited, its subsidiaries or associated 
companies, except where the author specifically states them to be the views of 
1Spatial Group Limited, its subsidiaries or associated companies.

1Spatial Group Limited, its subsidiaries and associated companies will not be 
held liable for any legally binding obligations that are not the subject of an 
official 1Spatial purchase order or as part of a contract signed by a director 
of one of the aforementioned companies.

Although the company has taken reasonable precautions to ensure no viruses are 
present in this email, the company cannot accept responsibility for any loss or 
damage arising from the use of this email or attachments. You should understand 
and accept that, when communicating with us by e-mail, it is not a totally 
secure communications medium.