[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Octave 4.03 x86 Plot problems

From: Doug Stewart
Subject: Re: Octave 4.03 x86 Plot problems
Date: Sun, 7 Aug 2016 11:05:46 -0400

On Sun, Aug 7, 2016 at 10:18 AM, Martin Marmsoler <address@hidden> wrote:
Sorry, I forgot to upload the script.

2016-08-07 16:14 GMT+02:00 Doug Stewart <address@hidden>:

On Sun, Aug 7, 2016 at 5:11 AM, Martin Marmsoler <address@hidden> wrote:

I tried to plot some data from files in Octave. It works fine when I commented out the x & y labels. But when I turn them on, sometimes the plot stays white and sometimes there is something but completly wrong. Attached you can find the script:
Dropbox says that that folder is empty !!

Hope someone can help me with it.

Best regards


Help-octave mailing list

DASCertificate for 206392

I think i see some things that might help.

I think you should get rid of the hold on and off.
try this

 #   hold on;
    plot(delay_val, power_data(:,1),'color',rand(1,3),delay_val, power_data(:,2),'color',rand(1,3),delay_val, power_data(:,3),'color',rand(1,3));
  #  hold off;
    lgd2{voltage_counter} = ['Eingangsspannung: ' num2str(voltage_val(voltage_counter)) 'V'];
     xlabel("Verzoegerung des Ausschalten us");

you can see that i also moved the xlabel and ylabel down to here at the 
end of the plot

Let me know if this helps


reply via email to

[Prev in Thread] Current Thread [Next in Thread]