[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: octave 3.8.2 : build failed via macports on OS X 10.11
|
From: |
xstereo |
|
Subject: |
Re: octave 3.8.2 : build failed via macports on OS X 10.11 |
|
Date: |
Wed, 2 Dec 2015 01:17:50 -0800 (PST) |
>>> /usr/local/texlive/2015/bin/x86_64-darwin
this is the path to my tex installation, It’s standard from a default texlive
installation, the texlive folder is 1.21GB in size, I don’t know whether it’s
basic or medium. But the texi2dvi command works perfectly in shell. do you
mean I have to link all the bin’s into /opt/local/bin?
does that mean macports only includes /opt/local/bin as its path?
(It seems you can’t receive via the mailing list, so I sent again, please
forgive if you’ve received duplicates)
> On Dec 2, 2015, at 09:56, Marius Schamschula-5 [via Octave] <address@hidden>
> wrote:
>
> xstereo,
>
> On Dec 1, 2015, at 7:34 PM, xstereo <[hidden email]
> <x-msg://12/user/SendEmail.jtp?type=node&node=4673741&i=0>> wrote:
>
>> Hi Marius,
>> "ls -l /opt/local/bin/texi2dvi” gives the following
>> -rwxr-xr-x 1 root admin 57338 Dec 1 20:33 /opt/local/bin/texi2dvi
>>
>>
>> by the way, how do you install octave 4.0 via macports?
>>> On Dec 2, 2015, at 03:52, Marius Schamschula-5 [via Octave] <[hidden email]
>>> <x-msg://12/user/SendEmail.jtp?type=node&node=4673741&i=1>> wrote:
>>>
>>> xstereo,
>>>
>>> On Dec 1, 2015, at 10:02 AM, xstereo <[hidden email] <<a
>>> href="x-msg://9/user/SendEmail.jtp?type=node&node=4673730&i=0">x-msg://9/user/SendEmail.jtp?type=node&node=4673730&i=0>>
>>> wrote:
>>>
>>>> Hello everyone, I have been trying to install octave via macports.
>>>> the dependencies cost me days to install, now that every dependency has
>>>> been
>>>> correctly installed without even a warning.
>>>> But when building octave itself, I get the error message
>>>>
>>>> At the end of the post is the main.log in some directory, I only pasted
>>>> from
>>>> where the error starts to appear. It says I don't have a TeX binary in my
>>>> PATH so texi2dvi can't do its job. But case is I have texlive2015
>>>> perfectly
>>>> installed and I've checked my PATH and it contains the tex bin directory,
>>>> moreover both "tex" and "sudo tex" works fine in terminal, "texi2dvi
>>>> filename.tex" in terminal works fine too, and "which texi2dvi" in terminal
>>>> gives "/opt/local/bin/texi2dvi" as it should be. Here's my "echo $PATH":
>>>> /opt/local/bin:/opt/local/sbin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/opt/X11/bin:/usr/local/texlive/2015/bin/x86_64-darwin
>>>>
>>>>
>>>> Please help me solve this issue! Also, I was thinking maybe the new octave
>>>> 4.0 solve this issue, but I don't know how to install octave 4.0 via
>>>> macports, if you know please teach me, thank you~
>>>>
>>>>
>>>> :info:destroot TEXINPUTS="./..:$TEXINPUTS" \
>>>> :info:destroot MAKEINFO='/bin/sh
>>>> /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_octave/octave/work/octave-3.8.2/build-aux/missing
>>>>
>>>> makeinfo -I .' \
>>>> :info:destroot /opt/local/bin/texi2dvi --build-dir=t2d_cache
>>>> --build-dir=octave.t2d -o octave.dvi \
>>>> :info:destroot octave.texi
>>>> :info:destroot You don't have a working TeX binary (tex) installed
>>>> anywhere
>>>> in
>>>> :info:destroot your PATH, and texi2dvi cannot proceed without one. If you
>>>> want to use
>>>> :info:destroot this script, you'll need to install TeX (if you don't have
>>>> it) or change
>>>> :info:destroot your PATH or TEX environment variable (if you do). See the
>>>> --help
>>>> :info:destroot output for more details.
>>>> :info:destroot
>>>> :info:destroot For information about obtaining TeX, please see
>>>> http://tug.org/texlive <http://tug.org/texlive> <http://tug.org/texlive
>>>> <http://tug.org/texlive>>,
>>>> :info:destroot or do a web search for TeX and your operating system or
>>>> distro.
>>>> :info:destroot make[3]: *** [octave.dvi] Error 1
>>>> :info:destroot make[3]: Leaving directory
>>>> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_octave/octave/work/octave-3.8.2/doc/interpreter'
>>>>
>>>> :info:destroot make[2]: *** [install-recursive] Error 1
>>>> :info:destroot make[2]: Leaving directory
>>>> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_octave/octave/work/octave-3.8.2/doc'
>>>>
>>>> :info:destroot make[1]: *** [install-recursive] Error 1
>>>> :info:destroot make[1]: Leaving directory
>>>> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_octave/octave/work/octave-3.8.2'
>>>>
>>>> :info:destroot make: *** [install] Error 2
>>>> :info:destroot make: Leaving directory
>>>> `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_octave/octave/work/octave-3.8.2'
>>>>
>>>> :info:destroot Command failed: cd
>>>> "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_octave/octave/work/octave-3.8.2"
>>>>
>>>> && /usr/bin/make -w install
>>>> DESTDIR=/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_octave/octave/work/destroot
>>>>
>>>> :info:destroot Exit code: 2
>>>> :error:destroot org.macports.destroot for port octave returned: command
>>>> execution failed
>>>> :debug:destroot Error code: CHILDSTATUS 77814 2
>>>> :debug:destroot Backtrace: command execution failed
>>>> while executing
>>>> "system -nice 0 $fullcmdstring"
>>>> ("eval" body line 1)
>>>> invoked from within
>>>> "eval system $notty $nice \$fullcmdstring"
>>>> invoked from within
>>>> "command_exec destroot"
>>>> (procedure "portdestroot::destroot_main" line 2)
>>>> invoked from within
>>>> "portdestroot::destroot_main org.macports.destroot"
>>>> ("eval" body line 1)
>>>> invoked from within
>>>> "eval $procedure $targetname"
>>>> :info:destroot Warning: targets not executed for octave:
>>>> org.macports.activate org.macports.destroot org.macports.install
>>>> :notice:destroot Please see the log file for port octave for details:
>>>>
>>>> /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_math_octave/octave/main.log
>>>>
>>>>
>>>
>>> "echo $PATH” only gives you your shell’s path, not MacPorts’.
>>>
>>> What does
>>>
>>> ls -l /opt/local/bin/texi2dvi
>>>
>>> say?
>>>
>>> P.S> I have not tried to install octave 3.8.2 under El Capitan using
>>> MacPorts, but I saw no such error installing octave 4.0.0 on three machines
>>> to date.
>>>
>>> Marius
>>> --
>>> Marius Schamschula
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Help-octave mailing list
>>> [hidden email] <<a
>>> href="x-msg://9/user/SendEmail.jtp?type=node&node=4673730&i=1">x-msg://9/user/SendEmail.jtp?type=node&node=4673730&i=1>
>>>
>>> https://lists.gnu.org/mailman/listinfo/help-octave
>>> <https://lists.gnu.org/mailman/listinfo/help-octave>
>>> <https://lists.gnu.org/mailman/listinfo/help-octave
>>> <https://lists.gnu.org/mailman/listinfo/help-octave>>
>>>
>>>
>>> If you reply to this email, your message will be added to the discussion
>>> below:
>>> http://octave.1599824.n4.nabble.com/octave-3-8-2-build-failed-via-macports-on-OS-X-10-11-tp4673715p4673730.html
>>>
>>> <http://octave.1599824.n4.nabble.com/octave-3-8-2-build-failed-via-macports-on-OS-X-10-11-tp4673715p4673730.html>
>>>
>>> <http://octave.1599824.n4.nabble.com/octave-3-8-2-build-failed-via-macports-on-OS-X-10-11-tp4673715p4673730.html
>>>
>>> <http://octave.1599824.n4.nabble.com/octave-3-8-2-build-failed-via-macports-on-OS-X-10-11-tp4673715p4673730.html>>
>>> To unsubscribe from octave 3.8.2 : build failed via macports on OS X 10.11,
>>> click here < <
>>> <applewebdata://4BB3A07D-45DA-4641-8814-4A283EF2A888>http://octave.1599824.n4.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml
>>>
>>> <http://octave.1599824.n4.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>>
>>
>>
>>
>>
>> --
>> View this message in context:
>> http://octave.1599824.n4.nabble.com/octave-3-8-2-build-failed-via-macports-on-OS-X-10-11-tp4673715p4673740.html
>>
>> <http://octave.1599824.n4.nabble.com/octave-3-8-2-build-failed-via-macports-on-OS-X-10-11-tp4673715p4673740.html>
>> Sent from the Octave - General mailing list archive at Nabble.com
>> <http://nabble.com/>.
>>
>> _______________________________________________
>> Help-octave mailing list
>> [hidden email] <x-msg://12/user/SendEmail.jtp?type=node&node=4673741&i=2>
>> https://lists.gnu.org/mailman/listinfo/help-octave
>> <https://lists.gnu.org/mailman/listinfo/help-octave>
> Which is correct. So clearly the problem is not texinfo, but TeX.
>
> You mentioned that you have texlive 2015 installed. Which variant, basic,
> medium or full? I have +medium on all my machines. All the binaries should be
> linked from /opt/local/libexec/texlive/texbin to /opt/local/bin.
>
> Marius
> --
> Marius Schamschula
>
>
>
>
>
> _______________________________________________
> Help-octave mailing list
> [hidden email] <x-msg://12/user/SendEmail.jtp?type=node&node=4673741&i=3>
> https://lists.gnu.org/mailman/listinfo/help-octave
> <https://lists.gnu.org/mailman/listinfo/help-octave>
>
>
> If you reply to this email, your message will be added to the discussion
> below:
> http://octave.1599824.n4.nabble.com/octave-3-8-2-build-failed-via-macports-on-OS-X-10-11-tp4673715p4673741.html
>
> <http://octave.1599824.n4.nabble.com/octave-3-8-2-build-failed-via-macports-on-OS-X-10-11-tp4673715p4673741.html>
> To unsubscribe from octave 3.8.2 : build failed via macports on OS X 10.11,
> click here
> <http://octave.1599824.n4.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code&node=4673715&code=eGluc3RlaW54aW5nQDE2My5jb218NDY3MzcxNXwxODUxODM1ODk=>.
> NAML
> <http://octave.1599824.n4.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>
--
View this message in context:
http://octave.1599824.n4.nabble.com/octave-3-8-2-build-failed-via-macports-on-OS-X-10-11-tp4673715p4673754.html
Sent from the Octave - General mailing list archive at Nabble.com.