Re: mxe octave filure(Was Re: GraphicsMagick 16bit on windows)

[Tatsuro MATSUOKA]

 >>  After octave build, I have met an error.
>>  $ LANG=C make tar-dist
>>  make: *** No rule to make target '/c/usr/Tatsu/msys2_mingw32/mxe-
>>  octave32/mxe-octave/installed-packages/build-gcc', needed by
>>  '/c/usr/Tatsu/msys2_mingw32/mxe-octave32/mxe-octave/installed-
>>  packages/mpfr'.  Stop.
>> 
>>  For mingw mxe build gcc was not build so that this kind of thing
> corrected.
>>  This build was started on June 20. ItS \s old.
>> 
>>  If I freshly re-start mxe-build, is this issue solved?
>> 
> 
> In src/cloog.mk, isl.mk, mpc.mk and mfpr.mk, remove 'build-gcc' from
> PKG_DEPS
> It shouldn’t need it - even for notmal cross mingw buid.



I have deleted 'build-gcc' in src/cloog.mk, isl.mk, mpc.mk and mfpr.mk.
And resume the make.

In building mpfr,
libtool: link: gcc -std=gnu99 -shared  .libs/exceptions.o .libs/extract.o 
.libs/uceil_exp2.o .libs/uceil_log2.o .libs/ufloor_log2.o .libs/add.o 
.libs/add1.o .libs/add_ui.o .libs/agm.o .libs/clear.o .libs/cmp.o 
.libs/cmp_abs.o .libs/cmp_si.o .libs/cmp_ui.o .libs/comparisons.o 
.libs/div_2exp.o .libs/div_2si.o .libs/div_2ui.o .libs/div.o .libs/div_ui.o 
.libs/dump.o .libs/eq.o .libs/exp10.o .libs/exp2.o .libs/exp3.o .libs/exp.o 
.libs/frac.o .libs/frexp.o .libs/get_d.o .libs/get_exp.o .libs/get_str.o 
.libs/init.o .libs/inp_str.o .libs/isinteger.o .libs/isinf.o .libs/isnan.o 
.libs/isnum.o .libs/const_log2.o .libs/log.o .libs/modf.o .libs/mul_2exp.o 
.libs/mul_2si.o .libs/mul_2ui.o .libs/mul.o .libs/mul_ui.o .libs/neg.o 
.libs/next.o .libs/out_str.o .libs/printf.o .libs/vasprintf.o .libs/const_pi.o 
.libs/pow.o .libs/pow_si.o .libs/pow_ui.o .libs/print_raw.o 
.libs/print_rnd_mode.o .libs/reldiff.o .libs/round_prec.o .libs/set.o 
.libs/setmax.o .libs/setmin.o
.libs/set_d.o .libs/set_dfl_prec.o .libs/set_exp.o .libs/set_rnd.o 
.libs/set_f.o .libs/set_prc_raw.o .libs/set_prec.o .libs/set_q.o .libs/set_si.o 
.libs/set_str.o .libs/set_str_raw.o .libs/set_ui.o .libs/set_z.o .libs/sqrt.o 
.libs/sqrt_ui.o .libs/sub.o .libs/sub1.o .libs/sub_ui.o .libs/rint.o 
.libs/ui_div.o .libs/ui_sub.o .libs/urandom.o .libs/urandomb.o 
.libs/get_z_exp.o .libs/swap.o .libs/factorial.o .libs/cosh.o .libs/sinh.o 
.libs/tanh.o .libs/sinh_cosh.o .libs/acosh.o .libs/asinh.o .libs/atanh.o 
.libs/atan.o .libs/cmp2.o .libs/exp_2.o .libs/asin.o .libs/const_euler.o 
.libs/cos.o .libs/sin.o .libs/tan.o .libs/fma.o .libs/fms.o .libs/hypot.o 
.libs/log1p.o .libs/expm1.o .libs/log2.o .libs/log10.o .libs/ui_pow.o 
.libs/ui_pow_ui.o .libs/minmax.o .libs/dim.o .libs/signbit.o .libs/copysign.o 
.libs/setsign.o .libs/gmp_op.o .libs/init2.o .libs/acos.o .libs/sin_cos.o 
.libs/set_nan.o .libs/set_inf.o .libs/set_zero.o .libs/powerof2.o .libs/gamma.o
.libs/set_ld.o .libs/get_ld.o .libs/cbrt.o .libs/volatile.o .libs/fits_sshort.o 
.libs/fits_sint.o .libs/fits_slong.o .libs/fits_ushort.o .libs/fits_uint.o 
.libs/fits_ulong.o .libs/fits_uintmax.o .libs/fits_intmax.o .libs/get_si.o 
.libs/get_ui.o .libs/zeta.o .libs/cmp_d.o .libs/erf.o .libs/inits.o 
.libs/inits2.o .libs/clears.o .libs/sgn.o .libs/check.o .libs/sub1sp.o 
.libs/version.o .libs/mpn_exp.o .libs/mpfr-gmp.o .libs/mp_clz_tab.o .libs/sum.o 
.libs/add1sp.o .libs/free_cache.o .libs/si_op.o .libs/cmp_ld.o 
.libs/set_ui_2exp.o .libs/set_si_2exp.o .libs/set_uj.o .libs/set_sj.o 
.libs/get_sj.o .libs/get_uj.o .libs/get_z.o .libs/iszero.o .libs/cache.o 
.libs/sqr.o .libs/int_ceil_log2.o .libs/isqrt.o .libs/strtofr.o .libs/pow_z.o 
.libs/logging.o .libs/mulders.o .libs/get_f.o .libs/round_p.o .libs/erfc.o 
.libs/atan2.o .libs/subnormal.o .libs/const_catalan.o .libs/root.o .libs/sec.o 
.libs/csc.o .libs/cot.o .libs/eint.o .libs/sech.o .libs/csch.o .libs/coth.o
.libs/round_near_x.o .libs/constant.o .libs/abort_prec_max.o 
.libs/stack_interface.o .libs/lngamma.o .libs/zeta_ui.o .libs/set_d64.o 
.libs/get_d64.o .libs/jn.o .libs/yn.o .libs/rem1.o .libs/get_patches.o 
.libs/add_d.o .libs/sub_d.o .libs/d_sub.o .libs/mul_d.o .libs/div_d.o 
.libs/d_div.o .libs/li2.o .libs/rec_sqrt.o .libs/min_prec.o .libs/buildopt.o 
.libs/digamma.o .libs/bernoulli.o .libs/isregular.o .libs/set_flt.o 
.libs/get_flt.o .libs/scale2.o .libs/set_z_exp.o .libs/ai.o 
.libs/gammaonethird.o .libs/grandom.o   -lgmp  -m32 -O2 -mtune=pentiumpro 
-march=pentiumpro -Wl,--output-def -Wl,.libs/libmpfr-4.dll.def   -o 
.libs/libmpfr-4.dll -Wl,--enable-auto-image-base -Xlinker --out-implib -Xlinker 
.libs/libmpfr.dll.a
C:/msys64/mingw32/lib/gcc/i686-w64-mingw32/4.9.2/../../../../i686-w64-mingw32/bin/ld.exe:
 cannot find -lgmp
collect2.exe: error: ld returned 1 exit status
Makefile:431: recipe for target 'libmpfr.la' failed
make[4]: *** [libmpfr.la] Error 1

In mxe-octave/usr/lib, libgmp.dll.a exists.

In mpfr.mk,
        --with-gmp-lib='$(HOST_LIBDIR)'

Does HOST_LIBDIR should be added?

Tatsuro