RE: Help with saveas and fltk

[Rick M. Cox]

-----Original Message-----
From: address@hidden [mailto:address@hidden On Behalf Of Nicholas
Jankowski
Sent: Friday, June 07, 2013 7:39 AM
To: address@hidden
Cc: Rick M. Cox; help-octave Octave
Subject: Re: Help with saveas and fltk

On Fri, Jun 7, 2013 at 2:11 AM, Tatsuro MATSUOKA <address@hidden>
wrote:
> --- On Fri, 2013/6/7, Tatsuro MATSUOKA  wrote:
>> --- On Fri, 2013/6/7, Nicholas Jankowski wrote:
>>
>> > On Thu, Jun 6, 2013 at 6:25 PM, Rick M. Cox  wrote:
>> > Rick, would help if I could try to reproduce what you're doing. I'm not
running XP, but Win7, so things might be different. The "D:/Programs"
problem pops up A LOT due to microsoft's infinite wisdom of making core
folders with spaces in the filename's. Not just with Octave, either.
Previously conversations I've seen with that problem were with configuring
editors, though.
>> > If you could upload some simple m-files recreating your problem, I'd be
curious to see if it occurs here. Or maybe someone else with an XP box can
try recreating the issue.
>> > nickj
>> >
>> > Nick:
>> >
>> >
>> >
>> > Thanks for the help offer.  I have attached the short Octave program
that is an example of my problem.
>> >
>> >
>> >
>> > My system:
>> > .       Pentium 4, 3.2 GHz
>> > .       Windows XP Pro SP3
>> > .       Visual C++ 2010 Redistributable Package
>> > .       Octave 3.6.4
>> > .       Latest version of GhostScript
>> >
>> > Both Octave and GhostScript are installed in paths that have no white
spaces.
>> > Octave commands:
>> >
>> > >scdraw
>> >
>> > >print "test.png"
>> >
>> >
>> >
>> > With 'gnuplot' everything works as expected.  It takes 60 seconds for
'scdraw' to generate the Smith Chart and another 50 seconds for the print
command to save the file.  I can save any file format without problems.
>> >
>> >
>> >
>> > With 'fltk' the 'scdraw' program generates the Smith Chart in about 10
seconds.  The print command causes the figure window to become scrambled and
unresponsive.  Octave is also unresponsive and I have to close it.  Any file
format that I try produces the same result.
>> >
>> >
>> >
>> > I hope you can help me out!
>>
>> > Rick
>>
>> > Will check it out when I'm back at work. But FYI i'm running the MinGW
version on Win7, so who knows what will happen :)
>> >
>> >
>> > regarding load time, I do notice when I do other simple things in
Octave it takes a long time for the first figure to load (i usually have
things set to fltk). so something as simple as:
>> > plot([1 2 3])
>> > will take a long time to run once, but a 'close all' followed by
plot([1 2 3]) again will pop right up (same with any other figures after the
first). so i assume that the first figure has some program loading or
initialization occurring. perhaps something similar here? or is it just as
slow every time?
>>
>> Hello Rick
>>
>> I examined your example on 3.6.4 (VS) (Win7 64 bit core i5 4GB Ram).
>>
>> >> graphics_toolkit fltk
>> >> scdraw
>> >> tic; print -dpdf scdraw.pdf; toc
>> Elapsed time is 1014.2 seconds.
>>
>> I also tested 3.6.4 mingw.
>>
>> >> graphics_toolkit fltk
>> >> scdraw
>> >> tic; print -dpdf scdraw.pdf; toc
>> Elapsed time is 1001.72 seconds.
>>
>> For both cases, printing time was more than one thousand second.
>>
>> Printing on fltk for your example was very slow.
>>
>> Regards
>>
>> Tatsuro
>
>
> I have tested on octave -3.7.2+ (development snapshot on Feb 23).
>
(http://octave.1599824.n4.nabble.com/Octave-3-7-2-Windows-VS2010-available-t
d4650194.html)
>
>>> graphics_toolkit fltk
>>> scdraw
>>> tic; print -dpdf scdraw.pdf; toc
> Elapsed time is 2.06 seconds.
>
> Speed of fltk printing seems to beimproved in the development source.
>
> Regards
>
> Tatsuro
>
>
WOW.  from 1000 to 2 seconds. now that's pretty impressive.

Tatsuro:

I installed Octave 3.7.2+ and here is what I found:

1.  I cannot save .pdf file format.  The Octave prompt returns after a few
seconds but there is no file actually saved.
2.  I can save .eps and .png file formats.  It does seem that 3.7.2+ is very
fast!  Unfortunately the saved drawing is a mess.

Please look at the two attached files.  "test2.png" is what a Smith Chart is
supposed to look like (this was generated with "gnuplot").  "testK.png" is
what "fltk" is producing.  Something is clearly wrong with the "fltk" output
although it is fast!

BTW:  I really like the GUI for Octave 3.7.2+

Rick 

==========

Ben, Nick, Tatsuro, et al:

I was wondering if any of you had made any progress in replicating my file
save problem with 'fltk'.  To recap, 'fltk' quickly generates a correct
on-screen image of what I plot but when I try to save the figure it becomes
corrupted.  'gnuplot' does not seem to have this problem.

I have created a very simple sequence which generates this problem on my
WinXP machine:

x = linspace (-1, 1, 101);
y = sqrt (1 - x.^2);
plot (x, y)
print "testfltk.png"

The correct semicircular plot is generated on screen but the attached
'testfltk.png' file is what results from the print command.  For some reason
'fltk' periodically generates rays from the (-1, 0) point to the semicircle.


I would appreciate an opinion as to whether this is an Octave problem, a
fltk problem or a problem with my particular WinXP configuration.

Thanks,

Rick

testfltk.png
Description: PNG image