RE: Help-octave Digest, Vol 42, Issue 28

[dastew]

In octave do

pwd

(present working directory  pwd)

this is where octave will look for the file, so copy the data file to there and then octave will find it.

Doug

---

Date: Sun, 13 Sep 2009 16:59:33 +0530
Subject: Re: Help-octave Digest, Vol 42, Issue 28
From: address@hidden
To: address@hidden

thanks.

i am saving the output data of c program in data file named data.dat
now to load the file into octave, octave will need to know where the file is.
how i should tell octave where to find it
i saw the help on load, but it is not giving this info.

regards,
Johny

On Sun, Sep 13, 2009 at 4:39 PM, <address@hidden> wrote:

One way to do it is to write the data to a text file, and then use the load command in octave to read the data from the file, and then plot it in octave.

Doug

---

Date: Sun, 13 Sep 2009 16:29:30 +0530
Subject: Re: Help-octave Digest, Vol 42, Issue 28
From: address@hidden

To: address@hidden

Hello

i am new user to octave

i have a c program whose output which is two colums of data should be plotted by octave as X and Y
i am using red hat machine.

any suggestions are appreciated.

regards
Johny