[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: error - make octave
|
From: |
Jaroslav Hajek |
|
Subject: |
Re: error - make octave |
|
Date: |
Thu, 8 Jan 2009 12:25:55 +0100 |
On Thu, Jan 8, 2009 at 12:02 PM, m.vaessen <address@hidden> wrote:
> Hello,
>
> I did :
>
> ./configure --prefix=/opt/octave/octave-3.0.3/lib
> --srcdir=/opt/octave/octave-3.0.3 CC=icc F77=ifort CXX=icpc
>
> and after this:
>
> make
>
> The following is the end of the output I got on the screen.
> Does anyone know what I can do to eliminate the errors and the end?
>
Install makeinfo. If you're not interested in building the docs, ignore them.
> After this I did:
>
> make check
>
> But also this output isn't correct.
>
What a funny message. Does run-octave start Octave at all?
> Many thanks for your help in advance!
>
> Best regards,
> Marga Vaeßen
>
>
>
>
>
>
> ../liboctave/ArrayN.h(129): remark #981: operands are evaluated in
> unspecified order
> return ArrayN<T> (tmp, tmp.dims ());
> ^
>
> ../liboctave/ArrayN.h(136): remark #981: operands are evaluated in
> unspecified order
> return ArrayN<T> (tmp, tmp.dims ());
> ^
>
> ../liboctave/Array3.h(56): remark #981: operands are evaluated in
> unspecified order
> : Array<T> (dim_vector (r, c, p), val) { }
> ^
>
> icpc -shared -o __voronoi__.oct pic/__voronoi__.o -L../libcruft -lcruft
> -L../liboctave -loctave -L. -loctinterp -lreadline -lncurses
> -ldl -lz -lm -lz -L/usr -limf -lm -L/opt/intel/fce/9.1.039/lib
> -L/usr/lib64/gcc/x86_64-suse-linux/4.1.2/
> -L/usr/lib64/gcc/x86_64-suse-linux/4.1.2/../../../../lib64/../lib64
> -lsvml -lifport -lifcore -lipgo -lirc -lgcc_s -lirc_s -ldl
> /opt/octave/octave-3.0.3/src/mk-pkg-add balance.df besselj.df
> betainc.df bsxfun.df cellfun.df chol.df ccolamd.df colamd.df
> colloc.df conv2.df convhulln.df daspk.df dasrt.df dassl.df det.df
> dispatch.df eig.df expm.df fft.df fft2.df fftn.df fftw.df
> filter.df find.df fsolve.df gammainc.df gcd.df getgrent.df
> getpwent.df getrusage.df givens.df hess.df inv.df kron.df lsode.df
> lu.df luinc.df matrix_type.df max.df md5sum.df pinv.df qr.df
> quad.df qz.df rand.df regexp.df schur.df sort.df sparse.df
> spchol.df spdet.df spfind.df spkron.df splu.df spparms.df spqr.df
> sqrtm.df svd.df syl.df symrcm.df time.df tsearch.df typecast.df
> urlwrite.df __contourc__.df __delaunayn__.df __dsearchn__.df
> __gnuplot_raw__.df __glpk__.df __lin_interpn__.df __pchip_deriv__.df
> __qp__.df __voronoi__.df > PKG_ADD-t
> making doc-files
> DOC_FILES = __contourc__.df __delaunayn__.df __dsearchn__.df __glpk__.df
> __gnuplot_raw__.df __lin_interpn__.df __pchip_deriv__.df __qp__.df
> __voronoi__.df balance.df besselj.df betainc.df bitfcns.df bsxfun.df
> ccolamd.df cellfun.df chol.df colamd.df colloc.df conv2.df convhulln.df
> daspk.df dasrt.df dassl.df data.df debug.df defaults.df defun.df det.df
> dirfns.df dispatch.df eig.df error.df expm.df fft.df fft2.df fftn.df
> fftw.df file-io.df filter.df find.df fsolve.df gammainc.df gcd.df
> getgrent.df getpwent.df getrusage.df givens.df graphics.df help.df
> hess.df input.df inv.df kron.df lex.df load-path.df load-save.df
> ls-oct-ascii.df lsode.df lu.df luinc.df mappers.df matrix_type.df max.df
> md5sum.df oct-hist.df octave.df ov-base.df ov-cell.df ov-fcn-handle.df
> ov-fcn-inline.df ov-int16.df ov-int32.df ov-int64.df ov-int8.df
> ov-list.df ov-re-mat.df ov-streamoff.df ov-struct.df ov-typeinfo.df
> ov-uint16.df ov-uint32.df ov-uint64.df ov-uint8.df ov-usr-fcn.df ov.df
> pager.df parse.df pinv.df pr-output.df pt-arg-list.df pt-mat.df qr.df
> quad.df qz.df rand.df regexp.df schur.df sighandlers.df sort.df
> sparse.df spchol.df spdet.df spfind.df spkron.df splu.df spparms.df
> spqr.df sqrtm.df strfns.df svd.df syl.df symrcm.df symtab.df syscalls.df
> sysdep.df time.df toplev.df tsearch.df typecast.df urlwrite.df utils.df
> variables.df
> mv doc-files-t doc-files
> making gendoc.cc
> icpc -g -O2 -o gendoc gendoc.cc
> making DOCSTRINGS
> make[2]: Leaving directory `/opt/octave/octave-3.0.3/src'
> make -C scripts all
> make[2]: Entering directory `/opt/octave/octave-3.0.3/scripts'
> make -C audio all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/audio'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/audio'
> make -C control all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/control'
> make[3]: Nothing to be done for `all'.
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/control'
> make -C deprecated all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/deprecated'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/deprecated'
> make -C elfun all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/elfun'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/elfun'
> make -C finance all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/finance'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/finance'
> make -C general all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/general'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/general'
> make -C geometry all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/geometry'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/geometry'
> make -C image all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/image'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/image'
> make -C io all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/io'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/io'
> make -C linear-algebra all
> make[3]: Entering directory
> `/opt/octave/octave-3.0.3/scripts/linear-algebra'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/linear-algebra'
> make -C miscellaneous all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/miscellaneous'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/miscellaneous'
> make -C optimization all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/optimization'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/optimization'
> make -C path all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/path'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/path'
> make -C pkg all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/pkg'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/pkg'
> make -C plot all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/plot'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/plot'
> make -C polynomial all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/polynomial'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/polynomial'
> make -C quaternion all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/quaternion'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/quaternion'
> make -C set all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/set'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/set'
> make -C signal all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/signal'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/signal'
> make -C sparse all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/sparse'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/sparse'
> make -C specfun all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/specfun'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/specfun'
> make -C special-matrix all
> make[3]: Entering directory
> `/opt/octave/octave-3.0.3/scripts/special-matrix'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/special-matrix'
> make -C startup all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/startup'
> making PKG_ADD
> ls: *.m: No such file or directory
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/startup'
> make -C statistics all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/statistics'
> make -C base all
> make[4]: Entering directory
> `/opt/octave/octave-3.0.3/scripts/statistics/base'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[4]: Leaving directory
> `/opt/octave/octave-3.0.3/scripts/statistics/base'
> make -C distributions all
> make[4]: Entering directory
> `/opt/octave/octave-3.0.3/scripts/statistics/distributions'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[4]: Leaving directory
> `/opt/octave/octave-3.0.3/scripts/statistics/distributions'
> make -C models all
> make[4]: Entering directory
> `/opt/octave/octave-3.0.3/scripts/statistics/models'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[4]: Leaving directory
> `/opt/octave/octave-3.0.3/scripts/statistics/models'
> make -C tests all
> make[4]: Entering directory
> `/opt/octave/octave-3.0.3/scripts/statistics/tests'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[4]: Leaving directory
> `/opt/octave/octave-3.0.3/scripts/statistics/tests'
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/statistics'
> make -C strings all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/strings'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/strings'
> make -C testfun all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/testfun'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/testfun'
> make -C time all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/scripts/time'
> making PKG_ADD
> ls: *.cc: No such file or directory
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/scripts/time'
> icpc -g -O2 -o gethelp gethelp.cc
> /opt/octave/octave-3.0.3/scripts/mkdoc /opt/octave/octave-3.0.3/scripts
> > DOCSTRINGS.t
> mv DOCSTRINGS.t DOCSTRINGS
> make[2]: Leaving directory `/opt/octave/octave-3.0.3/scripts'
> make -C doc all
> make[2]: Entering directory `/opt/octave/octave-3.0.3/doc'
> making conf.texi from conf.texi.in
> make -C faq all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/doc/faq'
> /opt/octave/octave-3.0.3/missing makeinfo --html --ifinfo --no-split
> --output=Octave-FAQ.html -I.. -I/opt/octave/octave-3.0.3/doc/faq
> -I/opt/octave/octave-3.0.3/doc/faq/.. Octave-FAQ.texi
> WARNING: `makeinfo' is missing on your system. You should only need it if
> you modified a `.texi' or `.texinfo' file, or any other file
> indirectly affecting the aspect of the manual. The spurious
> call might also be the consequence of using a buggy `make' (AIX,
> DU, IRIX). You might want to install the `Texinfo' package or
> the `GNU make' package. Grab either from any GNU archive site.
>
> You may also need `makeinfo' if you obtained this package from
> the CVS
> archive because files that can be automatically generated are not
> considered source files and are not checked in to the CVS archive.
>
> You may also need `makeinfo' if you ran make maintainer-clean and
> removed files that can be automatically generated but that are
> normally distributed as part of the package for convenience.
> make[3]: [Octave-FAQ.html] Error 1 (ignored)
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/doc/faq'
> make -C interpreter all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/doc/interpreter'
> make -C ../../src DOCSTRINGS
> make[4]: Entering directory `/opt/octave/octave-3.0.3/src'
> making defaults.h from defaults.h.in
> defaults.h is unchanged
> making oct-conf.h from oct-conf.h.in
> oct-conf.h is unchanged
> make[4]: `DOCSTRINGS' is up to date.
> make[4]: Leaving directory `/opt/octave/octave-3.0.3/src'
> make -C ../../scripts DOCSTRINGS
> make[4]: Entering directory `/opt/octave/octave-3.0.3/scripts'
> make[4]: `DOCSTRINGS' is up to date.
> make[4]: Leaving directory `/opt/octave/octave-3.0.3/scripts'
> icpc -g -O2 -o munge-texi munge-texi.cc
> making arith.texi from arith.txi
> arith.texi is unchanged
> making audio.texi from audio.txi
> audio.texi is unchanged
> making basics.texi from basics.txi
> basics.texi is unchanged
> making bugs.texi from bugs.txi
> bugs.texi is unchanged
> making container.texi from container.txi
> container.texi is unchanged
> making control.texi from control.txi
> control.texi is unchanged
> making cp-idx.texi from cp-idx.txi
> cp-idx.texi is unchanged
> making data.texi from data.txi
> data.texi is unchanged
> making debug.texi from debug.txi
> debug.texi is unchanged
> making diffeq.texi from diffeq.txi
> diffeq.texi is unchanged
> making dynamic.texi from dynamic.txi
> dynamic.texi is unchanged
> making emacs.texi from emacs.txi
> emacs.texi is unchanged
> making errors.texi from errors.txi
> errors.texi is unchanged
> making eval.texi from eval.txi
> eval.texi is unchanged
> making expr.texi from expr.txi
> expr.texi is unchanged
> making finance.texi from finance.txi
> finance.texi is unchanged
> making fn-idx.texi from fn-idx.txi
> fn-idx.texi is unchanged
> making func.texi from func.txi
> func.texi is unchanged
> making geometry.texi from geometry.txi
> geometry.texi is unchanged
> making gpl.texi from gpl.txi
> gpl.texi is unchanged
> making grammar.texi from grammar.txi
> grammar.texi is unchanged
> making image.texi from image.txi
> image.texi is unchanged
> making install.texi from install.txi
> install.texi is unchanged
> making interp.texi from interp.txi
> interp.texi is unchanged
> making intro.texi from intro.txi
> intro.texi is unchanged
> making io.texi from io.txi
> io.texi is unchanged
> making linalg.texi from linalg.txi
> linalg.texi is unchanged
> making matrix.texi from matrix.txi
> matrix.texi is unchanged
> making nonlin.texi from nonlin.txi
> nonlin.texi is unchanged
> making numbers.texi from numbers.txi
> numbers.texi is unchanged
> making op-idx.texi from op-idx.txi
> op-idx.texi is unchanged
> making optim.texi from optim.txi
> optim.texi is unchanged
> making package.texi from package.txi
> package.texi is unchanged
> making plot.texi from plot.txi
> plot.texi is unchanged
> making poly.texi from poly.txi
> poly.texi is unchanged
> making preface.texi from preface.txi
> preface.texi is unchanged
> making quad.texi from quad.txi
> quad.texi is unchanged
> making quaternion.texi from quaternion.txi
> quaternion.texi is unchanged
> making set.texi from set.txi
> set.texi is unchanged
> making signal.texi from signal.txi
> signal.texi is unchanged
> making sparse.texi from sparse.txi
> sparse.texi is unchanged
> making stats.texi from stats.txi
> stats.texi is unchanged
> making stmt.texi from stmt.txi
> stmt.texi is unchanged
> making strings.texi from strings.txi
> strings.texi is unchanged
> making system.texi from system.txi
> system.texi is unchanged
> making testfun.texi from testfun.txi
> testfun.texi is unchanged
> making tips.texi from tips.txi
> tips.texi is unchanged
> making var.texi from var.txi
> var.texi is unchanged
> making vr-idx.texi from vr-idx.txi
> vr-idx.texi is unchanged
> gawk -f /opt/octave/octave-3.0.3/doc/interpreter/mkcontrib.awk
> /opt/octave/octave-3.0.3/doc/interpreter/contributors.in >
> contributors.texi-t
> contributors.texi is unchanged
> /opt/octave/octave-3.0.3/missing makeinfo -I..
> -I/opt/octave/octave-3.0.3/doc/interpreter
> -I/opt/octave/octave-3.0.3/doc/interpreter/..
> /opt/octave/octave-3.0.3/doc/interpreter/octave.texi
> WARNING: `makeinfo' is missing on your system. You should only need it if
> you modified a `.texi' or `.texinfo' file, or any other file
> indirectly affecting the aspect of the manual. The spurious
> call might also be the consequence of using a buggy `make' (AIX,
> DU, IRIX). You might want to install the `Texinfo' package or
> the `GNU make' package. Grab either from any GNU archive site.
>
> You may also need `makeinfo' if you obtained this package from
> the CVS
> archive because files that can be automatically generated are not
> considered source files and are not checked in to the CVS archive.
>
> You may also need `makeinfo' if you ran make maintainer-clean and
> removed files that can be automatically generated but that are
> normally distributed as part of the package for convenience.
> make[3]: [octave.info] Error 1 (ignored)
> TEXINPUTS="..:/opt/octave/octave-3.0.3/doc/interpreter:/opt/octave/octave-3.0.3/doc/interpreter/..::/home/vaessen/.TeX:/usr/share/doc/.TeX:/usr/doc/.TeX:"
> /opt/octave/octave-3.0.3/missing texi2dvi --pdf
> /opt/octave/octave-3.0.3/doc/interpreter/octave.texi
> WARNING: `texi2dvi' is needed, and you do not seem to have it handy on your
> system. You might have modified some files without having the
> proper tools for further handling them. Check the `README' file,
> it often tells you about the needed prerequirements for installing
> this package. You may also peek at any GNU archive site, in case
> some other package would contain this missing `texi2dvi' program.
>
> You may also need `texi2dvi' if you obtained this package from
> the CVS
> archive because files that can be automatically generated are not
> considered source files and are not checked in to the CVS archive.
>
> You may also need `texi2dvi' if you ran make maintainer-clean and
> removed files that can be automatically generated but that are
> normally distributed as part of the package for convenience.
> make[3]: [octave.pdf] Error 1 (ignored)
> TEXINPUTS="..:/opt/octave/octave-3.0.3/doc/interpreter:/opt/octave/octave-3.0.3/doc/interpreter/..::/home/vaessen/.TeX:/usr/share/doc/.TeX:/usr/doc/.TeX:"
> /opt/octave/octave-3.0.3/missing texi2dvi --pdf octave-a4.texi -t
> @afourpaper
> WARNING: `texi2dvi' is needed, and you do not seem to have it handy on your
> system. You might have modified some files without having the
> proper tools for further handling them. Check the `README' file,
> it often tells you about the needed prerequirements for installing
> this package. You may also peek at any GNU archive site, in case
> some other package would contain this missing `texi2dvi' program.
>
> You may also need `texi2dvi' if you obtained this package from
> the CVS
> archive because files that can be automatically generated are not
> considered source files and are not checked in to the CVS archive.
>
> You may also need `texi2dvi' if you ran make maintainer-clean and
> removed files that can be automatically generated but that are
> normally distributed as part of the package for convenience.
> make[3]: [octave-a4.pdf] Error 1 (ignored)
> /opt/octave/octave-3.0.3/missing makeinfo --html --ifinfo --output=HTML
> -I.. -I/opt/octave/octave-3.0.3/doc/interpreter
> -I/opt/octave/octave-3.0.3/doc/interpreter/..
> /opt/octave/octave-3.0.3/doc/interpreter/octave.texi
> WARNING: `makeinfo' is missing on your system. You should only need it if
> you modified a `.texi' or `.texinfo' file, or any other file
> indirectly affecting the aspect of the manual. The spurious
> call might also be the consequence of using a buggy `make' (AIX,
> DU, IRIX). You might want to install the `Texinfo' package or
> the `GNU make' package. Grab either from any GNU archive site.
>
> You may also need `makeinfo' if you obtained this package from
> the CVS
> archive because files that can be automatically generated are not
> considered source files and are not checked in to the CVS archive.
>
> You may also need `makeinfo' if you ran make maintainer-clean and
> removed files that can be automatically generated but that are
> normally distributed as part of the package for convenience.
> make[3]: [HTML/index.html] Error 1 (ignored)
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/doc/interpreter'
> make -C liboctave all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/doc/liboctave'
> /opt/octave/octave-3.0.3/missing makeinfo -I..
> -I/opt/octave/octave-3.0.3/doc/liboctave
> -I/opt/octave/octave-3.0.3/doc/liboctave/.. liboctave.texi
> WARNING: `makeinfo' is missing on your system. You should only need it if
> you modified a `.texi' or `.texinfo' file, or any other file
> indirectly affecting the aspect of the manual. The spurious
> call might also be the consequence of using a buggy `make' (AIX,
> DU, IRIX). You might want to install the `Texinfo' package or
> the `GNU make' package. Grab either from any GNU archive site.
>
> You may also need `makeinfo' if you obtained this package from
> the CVS
> archive because files that can be automatically generated are not
> considered source files and are not checked in to the CVS archive.
>
> You may also need `makeinfo' if you ran make maintainer-clean and
> removed files that can be automatically generated but that are
> normally distributed as part of the package for convenience.
> make[3]: [liboctave.info] Error 1 (ignored)
> TEXINPUTS="..:/opt/octave/octave-3.0.3/doc/liboctave:/opt/octave/octave-3.0.3/doc/liboctave/..::/home/vaessen/.TeX:/usr/share/doc/.TeX:/usr/doc/.TeX:"
> \
> /opt/octave/octave-3.0.3/missing texi2dvi liboctave.texi
> WARNING: `texi2dvi' is needed, and you do not seem to have it handy on your
> system. You might have modified some files without having the
> proper tools for further handling them. Check the `README' file,
> it often tells you about the needed prerequirements for installing
> this package. You may also peek at any GNU archive site, in case
> some other package would contain this missing `texi2dvi' program.
>
> You may also need `texi2dvi' if you obtained this package from
> the CVS
> archive because files that can be automatically generated are not
> considered source files and are not checked in to the CVS archive.
>
> You may also need `texi2dvi' if you ran make maintainer-clean and
> removed files that can be automatically generated but that are
> normally distributed as part of the package for convenience.
> make[3]: [liboctave.dvi] Error 1 (ignored)
> TEXINPUTS="..:/opt/octave/octave-3.0.3/doc/liboctave:/opt/octave/octave-3.0.3/doc/liboctave/..::/home/vaessen/.TeX:/usr/share/doc/.TeX:/usr/doc/.TeX:"
> \
> /opt/octave/octave-3.0.3/missing texi2dvi --pdf liboctave.texi
> WARNING: `texi2dvi' is needed, and you do not seem to have it handy on your
> system. You might have modified some files without having the
> proper tools for further handling them. Check the `README' file,
> it often tells you about the needed prerequirements for installing
> this package. You may also peek at any GNU archive site, in case
> some other package would contain this missing `texi2dvi' program.
>
> You may also need `texi2dvi' if you obtained this package from
> the CVS
> archive because files that can be automatically generated are not
> considered source files and are not checked in to the CVS archive.
>
> You may also need `texi2dvi' if you ran make maintainer-clean and
> removed files that can be automatically generated but that are
> normally distributed as part of the package for convenience.
> make[3]: [liboctave.pdf] Error 1 (ignored)
> /opt/octave/octave-3.0.3/missing makeinfo --html --ifinfo --output=HTML
> -I.. -I/opt/octave/octave-3.0.3/doc/liboctave
> -I/opt/octave/octave-3.0.3/doc/liboctave/.. liboctave.texi
> WARNING: `makeinfo' is missing on your system. You should only need it if
> you modified a `.texi' or `.texinfo' file, or any other file
> indirectly affecting the aspect of the manual. The spurious
> call might also be the consequence of using a buggy `make' (AIX,
> DU, IRIX). You might want to install the `Texinfo' package or
> the `GNU make' package. Grab either from any GNU archive site.
>
> You may also need `makeinfo' if you obtained this package from
> the CVS
> archive because files that can be automatically generated are not
> considered source files and are not checked in to the CVS archive.
>
> You may also need `makeinfo' if you ran make maintainer-clean and
> removed files that can be automatically generated but that are
> normally distributed as part of the package for convenience.
> make[3]: [HTML/index.html] Error 1 (ignored)
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/doc/liboctave'
> make -C refcard all
> make[3]: Entering directory `/opt/octave/octave-3.0.3/doc/refcard'
> make[3]: Nothing to be done for `all'.
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/doc/refcard'
> make[2]: Leaving directory `/opt/octave/octave-3.0.3/doc'
> make -C examples all
> make[2]: Entering directory `/opt/octave/octave-3.0.3/examples'
> echo "making octave.desktop from octave.desktop.in"
> making octave.desktop from octave.desktop.in
> /usr/bin/sed < octave.desktop.in > octave.desktop-t \
> -e
> "s|%OCTAVE_IMAGEDIR%|/opt/octave/octave-3.0.3/lib/share/octave/3.0.3/imagelib|"
> \
> -e "s|%OCTAVE_PREFIX%|/opt/octave/octave-3.0.3/lib|"
> if [ -s octave.desktop-t ]; then /opt/octave/octave-3.0.3/move-if-change
> octave.desktop-t octave.desktop; else echo "octave.desktop-t is empty!"
> 1>&2; rm -f octave.desktop-t; exit 1; fi
> make[2]: Leaving directory `/opt/octave/octave-3.0.3/examples'
> make -C doc ../INSTALL.OCTAVE
> make[2]: Entering directory `/opt/octave/octave-3.0.3/doc'
> make -C interpreter ../../INSTALL.OCTAVE
> make[3]: Entering directory `/opt/octave/octave-3.0.3/doc/interpreter'
> make -C ../../src DOCSTRINGS
> make[4]: Entering directory `/opt/octave/octave-3.0.3/src'
> making defaults.h from defaults.h.in
> defaults.h is unchanged
> making oct-conf.h from oct-conf.h.in
> oct-conf.h is unchanged
> make[4]: `DOCSTRINGS' is up to date.
> make[4]: Leaving directory `/opt/octave/octave-3.0.3/src'
> make -C ../../scripts DOCSTRINGS
> make[4]: Entering directory `/opt/octave/octave-3.0.3/scripts'
> make[4]: `DOCSTRINGS' is up to date.
> make[4]: Leaving directory `/opt/octave/octave-3.0.3/scripts'
> making install.texi from install.txi
> install.texi is unchanged
> rm -f INSTALL
> /opt/octave/octave-3.0.3/missing makeinfo -D INSTALLONLY \
> --no-validate --no-headers --no-split --output INSTALL \
> -I.. -I/opt/octave/octave-3.0.3/doc/interpreter
> -I/opt/octave/octave-3.0.3/doc/interpreter/.. install.texi
> WARNING: `makeinfo' is missing on your system. You should only need it if
> you modified a `.texi' or `.texinfo' file, or any other file
> indirectly affecting the aspect of the manual. The spurious
> call might also be the consequence of using a buggy `make' (AIX,
> DU, IRIX). You might want to install the `Texinfo' package or
> the `GNU make' package. Grab either from any GNU archive site.
>
> You may also need `makeinfo' if you obtained this package from
> the CVS
> archive because files that can be automatically generated are not
> considered source files and are not checked in to the CVS archive.
>
> You may also need `makeinfo' if you ran make maintainer-clean and
> removed files that can be automatically generated but that are
> normally distributed as part of the package for convenience.
> make[3]: [../../INSTALL.OCTAVE] Error 1 (ignored)
> mv INSTALL ../../INSTALL.OCTAVE
> mv: cannot stat `INSTALL': No such file or directory
> make[3]: *** [../../INSTALL.OCTAVE] Error 1
> make[3]: Leaving directory `/opt/octave/octave-3.0.3/doc/interpreter'
> make[2]: *** [../INSTALL.OCTAVE] Error 2
> make[2]: Leaving directory `/opt/octave/octave-3.0.3/doc'
> make[1]: *** [INSTALL.OCTAVE] Error 2
> make[1]: Leaving directory `/opt/octave/octave-3.0.3'
> make: *** [all] Error 2
>
>
>
> address@hidden:/opt/octave/octave-3.0.3> make check
> make -f octMakefile check
> make[1]: Entering directory `/opt/octave/octave-3.0.3'
> make -C test check
> make[2]: Entering directory `/opt/octave/octave-3.0.3/test'
> /opt/octave/octave-3.0.3/test/build_sparse_tests.sh
> ../run-octave --norc --silent --no-history
> /opt/octave/octave-3.0.3/test/fntests.m /opt/octave/octave-3.0.3/test
> ** On entry to octave parameter number 13 had an illegal value
> make[2]: *** [check] Segmentation fault
> make[2]: Leaving directory `/opt/octave/octave-3.0.3/test'
> make[1]: *** [check] Error 2
> make[1]: Leaving directory `/opt/octave/octave-3.0.3'
> make: *** [check] Error 2
>
>
> --
> Marga Vaessen
> Juelich Supercomputing Centre
> Forschungszentrum Juelich GmbH
> 52425 Juelich, Germany
>
> Phone: +49-2461-61-4136
> Fax: +49-2461-61-6656
> E-mail: address@hidden
> WWW: http://www.fz-juelich.de/jsc/
>
>
>
>
> -------------------------------------------------------------------
> -------------------------------------------------------------------
> Forschungszentrum Jülich GmbH
> 52425 Jülich
>
> Sitz der Gesellschaft: Jülich
> Eingetragen im Handelsregister des Amtsgerichts Düren Nr. HR B 3498
> Vorsitzende des Aufsichtsrats: MinDir'in Bärbel Brumme-Bothe
> Geschäftsführung: Prof. Dr. Achim Bachem (Vorsitzender),
> Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr. Harald Bolt,
> Dr. Sebastian M. Schmidt
> -------------------------------------------------------------------
> -------------------------------------------------------------------
>
>
>
> _______________________________________________
> Help-octave mailing list
> address@hidden
> https://www-old.cae.wisc.edu/mailman/listinfo/help-octave
>
--
RNDr. Jaroslav Hajek
computing expert
Aeronautical Research and Test Institute (VZLU)
Prague, Czech Republic
url: www.highegg.matfyz.cz