Re: eigs using SuiteSparse

[Søren Hauberg]

Well, the error message just says that you haven't installed ARPACK
(which the package needs to be installed). I don't know how to install
ARPACK on a Mac, but I'm guessing that's your problem. Perhaps the Mac
people on this list has some insights?

It'll probably help if you tell how you installed Octave on your Mac.
Through Fink or did you use the package from Octave-Forge? 

Søren

man, 13 10 2008 kl. 00:11 -0700, skrev Ilan Boaz:
> Below is the output of 'pkg install arpack-1.0.6.tar.gz'.
> Do I need to compile LAPACK (and other stuff) before compiling ARPACK?
> 
> Eventually I will get the hang of this (hopefully before people get  
> tired of answering :-))
> 
> Thanks much,
> Boaz
> 
> /usr/libexec/gcc/powerpc-apple-darwin8/4.0.1/ld: can't locate file  
> for: -larpack
> collect2: ld returned 1 exit status
> make: *** [eigs.oct] Error 1
> error: 'make' returned the following error: mkoctfile - 
> DHAVE_OCTAVE_30 -v -DHAVE_CONFIG_H -DHAVE_ARPACK eigs.cc -larpack
> gcc -c -I/Applications/Octave.app/Contents/Resources/include -I/ 
> Applications/Octave.app/Contents/Resources/include/curl -I/ 
> Applications/Octave.app/Contents/Resources/include/readline -I/ 
> Applications/Octave.app/Contents/Resources/include -I/Applications/ 
> Octave.app/Contents/Resources/include/curl -I/Applications/Octave.app/ 
> Contents/Resources/include/readline -I/Applications/Octave.app/ 
> Contents/Resources/include -I/Applications/Octave.app/Contents/ 
> Resources/include/curl -I/Applications/Octave.app/Contents/Resources/ 
> include/readline -I/Applications/Octave.app/Contents/Resources/ 
> include/octave-3.0.2 -I/Applications/Octave.app/Contents/Resources/ 
> include/octave-3.0.2/octave -I/Applications/Octave.app/Contents/ 
> Resources/include -I/Applications/Octave.app/Contents/Resources/ 
> include -I/Applications/Octave.app/Contents/Resources/include/curl -I/ 
> Applications/Octave.app/Contents/Resources/include/readline -I/ 
> Applications/Octave.app/Contents/Resources/include -I/Applications/ 
> Octave.app/Contents/Resources/include/curl -I/Applications/Octave.app/ 
> Contents/Resources/include/readline -I/Applications/Octave.app/ 
> Contents/Resources/include -I/Applications/Octave.app/Contents/ 
> Resources/include/curl -I/Applications/Octave.app/Contents/Resources/ 
> include/readline -DHAVE_OCTAVE_30 -DHAVE_CONFIG_H -DHAVE_ARPACK  
> eigs.cc -o eigs.o
> g++ -O3 -ftree-vectorize -mpowerpc -faltivec -maltivec -mabi=altivec - 
> bundle -bundle_loader /Applications/Octave.app/Contents/Resources/bin/ 
> octave-3.0.2 -o eigs.oct eigs.o -larpack -L/Applications/Octave.app/ 
> Contents/Resources/lib/octave-3.0.2 -L/Applications/Octave.app/ 
> Contents/Resources/lib -loctinterp -loctave -lcruft -L/Applications/ 
> Octave.app/Contents/Resources/lib -L/Applications/Octave.app/Contents/ 
> Resources/lib/octave-3.0.2 -L/Applications/Octave.app/Contents/ 
> Resources/lib -L/Applications/Octave.app/Contents/Resources/lib/ 
> octave-3.0.2 -Wl,-framework -Wl,vecLib -lfftw3 -lreadline -lncurses - 
> lhdf5 -lz -lm -lf2c
> error: called from `pkg:configure_make' in file /Applications/ 
> Octave.app/Contents/Resources/share/octave/3.0.2/m/pkg/pkg.m near  
> line 1248, column 2
> 
> 
> On Oct 12, 2008, at 11:53 PM, Søren Hauberg wrote:
> 
> > søn, 12 10 2008 kl. 20:02 -0700, skrev Boaz Ilan:
> >> I also tried compiling ARPACK from sourceforge, but could not get  
> >> 'make'
> >> to work at all. My compilation know-how is obviously poor...
> >>
> >> Could someone tell me what do I need to do to have 'eigs'?
> >
> > I have no experience with the arpack package from octave-forge, but  
> > what
> > do you get (what output is written to the screen) when you run
> >
> >   pkg install arpack-1.0.6.tar.gz
> >
> > from within Octave?
> >
> > Søren
> >
>